5233 water damage dead - GSM-Forum

gangadhar121212 · 11-04-2011, 16:20

dear members i m new to bb5 hardware so requested please give accurate solutions

i have received a set which was water damaged,i checked battery connector for shorting but there is not any shorting,then i open the set and see there is little water in one or two places,i clean it and check on software,i use cyclone for this, it,s shows this

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-625_40.1.003_prd.core.C00 (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1E8000011E9700528A1C96801D9A5C3E52E0A62D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-625_40.1.003_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Processing Flash Image Failed -> CMT Secondary Loader was not accepted (1)
Failed to Process all Image files -> Failed to process RM-625_40.1.003_prd.core.C00

i trying usb flashing but same error

please sir i want to know from where i can start repair

set is tottaly clean

reply soon thanks in advance

bobaly · 11-04-2011, 16:41

Brother first check cable if write
Phone in Blk error.
1.Use UFS
2. Check & click skip erase
3. write flash when flashing complete remove skip erase & flashing with usb.
4. if not solw then rehoot flash ic carefully.
I hope your problem 1005 solw

gangadhar121212 · 11-04-2011, 16:45

Quote:

Originally Posted by bobaly

Brother Phone in Blk error.
1.Use UFS
2. Check & click skip erase
3. write flash when flashing complete remove skip erase & flashing with usb.
4. if not solw then rehoot flash ic carefully.
I hope your problem 1005 solw

thanks sir for quick reply,i tried and post result

gangadhar121212 · 11-04-2011, 16:57

Quote:

Originally Posted by bobaly

Brother first check cable if write
Phone in Blk error.
1.Use UFS
2. Check & click skip erase
3. write flash when flashing complete remove skip erase & flashing with usb.
4. if not solw then rehoot flash ic carefully.
I hope your problem 1005 solw

sir i tried on ufs with skip erase option but shows this

1ST BOOT : C0,07 [Rm-625] [2.2.0.0]
CMT ASICID: 000000010000022600010006400C192101051105
EM 1 ID : 00000296
EM 2 ID : 00000B22
CMT PUBID : 1E8000011E9700528A1C96801D9A5C3E52E0A62D
CMT MODE : 00
CMT HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROMID : 4B9B75103E691FF8
CMT 1ST Boot OK
Cannot Find KEYS CERT
BAD BOOT
ERR: CMT 2ND Boot File not Found
IMAGE : RM-625_40.1.003_prd.core.C00
Process Failed, Repowering Mobile

sir now what can i do?

bobaly · 11-05-2011, 02:49

Quote:

Originally Posted by gangadhar121212

sir i tried on ufs with skip erase option but shows this

1ST BOOT : C0,07 [Rm-625] [2.2.0.0]
CMT ASICID: 000000010000022600010006400C192101051105
EM 1 ID : 00000296
EM 2 ID : 00000B22
CMT PUBID : 1E8000011E9700528A1C96801D9A5C3E52E0A62D
CMT MODE : 00
CMT HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROMID : 4B9B75103E691FF8
CMT 1ST Boot OK
Cannot Find KEYS CERT
BAD BOOT
ERR: CMT 2ND Boot File not Found
IMAGE : RM-625_40.1.003_prd.core.C00
Process Failed, Repowering Mobile

sir now what can i do?

Check flashing cable, change & try..........

gangadhar121212 · 11-06-2011, 07:36

Quote:

Originally Posted by bobaly

Check flashing cable, change & try..........

i buy new cable and also check with a working cable,but same error

1ST BOOT : C0,07 [Rm-625] [2.2.0.0]
CMT ASICID: 000000010000022600010006400C192101051105
EM 1 ID : 00000296
EM 2 ID : 00000B22
CMT PUBID : 1E8000011E9700528A1C96801D9A5C3E52E0A62D
CMT MODE : 00
CMT HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROMID : 4B9B75103E691FF8
CMT 1ST Boot OK
Cannot Find KEYS CERT
BAD BOOT
ERR: CMT 2ND Boot File not Found
Rebooting Mobile

gangadhar121212 · 11-06-2011, 12:43

very depressed,no reply further

gangadhar121212 · 11-07-2011, 16:43

Quote:

Originally Posted by bobaly

Brother first check cable if write
Phone in Blk error.
1.Use UFS
2. Check & click skip erase
3. write flash when flashing complete remove skip erase & flashing with usb.
4. if not solw then rehoot flash ic carefully.
I hope your problem 1005 solw

no further reply but at last very thankfull, my problem solved by reball flash ic

thanks

11-04-2011, 16:20	#1 (permalink)
gangadhar121212 Freak Poster Join Date: Aug 2009 Location: yamuna nagar haryana india Posts: 193 Member: 1108823 Status: Offline Thanks Meter: 20	5233 water damage dead dear members i m new to bb5 hardware so requested please give accurate solutions i have received a set which was water damaged,i checked battery connector for shorting but there is not any shorting,then i open the set and see there is little water in one or two places,i clean it and check on software,i use cyclone for this, it,s shows this Processing pre flash tasks... Pre flash tasks finished, continuing... Processing RM-625_40.1.003_prd.core.C00 (CMT)... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1E8000011E9700528A1C96801D9A5C3E52E0A62D CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! RM-625_40.1.003_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5 Searching for BootCode: DualLine 32Bit RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5 Flashbus Write baud set to 650Kbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Processing Flash Image Failed -> CMT Secondary Loader was not accepted (1) Failed to Process all Image files -> Failed to process RM-625_40.1.003_prd.core.C00 i trying usb flashing but same error please sir i want to know from where i can start repair set is tottaly clean reply soon thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repaired dead phone without backup	Prodigal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-29-2011 11:26
water damaged 5110	gsmxc	Nokia Hardware & Hardware Repair	5	10-18-2001 16:15
help! Dead 5110 v5.30	aklishin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-04-2001 11:56
nokia 5110 dead	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-28-2001 11:59
6150 V5.20 WANTED --- DEAD OR ALIVE --- IT'S BETTER ALIVE ! ;)))	tcamilo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-19-1999 22:30

11-04-2011, 16:41	#2 (permalink)
bobaly Freak Poster Join Date: Apr 2010 Location: Palampur HP. (INDIA) Posts: 460 Member: 1291612 Status: Offline Sonork: 100.1625587 Thanks Meter: 98	Brother first check cable if write Phone in Blk error. 1.Use UFS 2. Check & click skip erase 3. write flash when flashing complete remove skip erase & flashing with usb. 4. if not solw then rehoot flash ic carefully. I hope your problem 1005 solw

11-06-2011, 12:43	#7 (permalink)
gangadhar121212 Freak Poster Join Date: Aug 2009 Location: yamuna nagar haryana india Posts: 193 Member: 1108823 Status: Offline Thanks Meter: 20	very depressed,no reply further