6111 white screen - GSM-Forum

gachero · 10-16-2006, 12:59

hi, can anyboby help me find solution on how to fix the display of 6111, only white is displayed. you can turn on and off the phone. i already change the flex and lcd no good result... thnks.....

bbmad · 10-16-2006, 13:10

Is the phone working apart from the white screen? ie can you make/receive calls or use the phone functions. Normally this problem is the flex cable or LCD.

Majid
www.mobilekrazy.com

kubik256 · 10-18-2006, 08:21

I have the same problem... but I found the reason of the fault.
The problem is broken µBGA filter next to LCD connector signed Z2501.

Does anybody know which board has the same type of this BGA??

Thanx, BR.

Jazz · 11-03-2006, 22:35

Quote:

Originally Posted by bbmad

Is the phone working apart from the white screen? ie can you make/receive calls or use the phone functions. Normally this problem is the flex cable or LCD.

Majid
www.mobilekrazy.com

I have a similar problem with a Nokia 6111. The phone works fine (ie, calling in/out), but only a white display).

safeshop · 12-06-2006, 13:46

i have this problem, changed the flex cable and it wasnt that, could it be that it needs a flash

Jeffyoh88 · 12-06-2006, 20:44

try change that cable ...
and post result

daanish · 12-21-2006, 05:06

hi all
kubik's solution is the best the one with pic i solved the problem,since this fone is made as samsung desine so we all think it's the flex cable i thought that too.but the flex cable used in this fone is 100 times better then the one in samsung but still we think it's the cable fault any way we have to remember that nokia always uses the ICs to control LCDs in newer models so before changing the cable (to save the time) we must check the ICs and BGA filters wich is used in 7610 too thanks to kubik
best regards
Daanish(Farhan)

astralis · 12-23-2006, 11:31

Quote:

Originally Posted by kubik256

I have the same problem... but I found the reason of the fault.
The problem is broken µBGA filter next to LCD connector signed Z2501.

Does anybody know which board has the same type of this BGA??

Thanx, BR.

I need also a solution for this broken BGA. thanks

daanish · 12-23-2006, 17:24

hi you can find this ic in all newer fones like 7610,6600,6670
it always beside the display ic in almost all the new nokias
Daanish (Farhan)

astralis · 12-26-2006, 18:10

Thank you man. I will try this

mobile world · 01-18-2007, 10:04

No need to get another ic just bredge the two side together at the both ends. And send the result

capri · 01-18-2007, 10:38

Quote:

Originally Posted by kubik256

I have the same problem... but I found the reason of the fault.
The problem is broken µBGA filter next to LCD connector signed Z2501.

Does anybody know which board has the same type of this BGA??

Thanx, BR.

Remove that BGA Z2501 and Jumper side by side....

br

capri

capri · 01-18-2007, 10:39

Quote:

Originally Posted by kubik256

I have the same problem... but I found the reason of the fault.
The problem is broken µBGA filter next to LCD connector signed Z2501.

Does anybody know which board has the same type of this BGA??

Thanx, BR.

Remove that BGA Z2501 and Jumper side by side....

br

capri

my toh · 01-30-2007, 07:58

can you show out by picture ?

sulai2k · 01-30-2007, 11:40

hai bro u change flux cable

100% ok

10-16-2006, 12:59	#1 (permalink)
gachero Major Poster Join Date: Jun 2006 Posts: 47 Member: 293272 Status: Offline Thanks Meter: 8	6111 white screen hi, can anyboby help me find solution on how to fix the display of 6111, only white is displayed. you can turn on and off the phone. i already change the flex and lcd no good result... thnks.....

12-23-2006, 17:24	#9 (permalink)
daanish Freak Poster Join Date: Aug 2004 Location: The great pakistan Posts: 384 Member: 79823 Status: Offline Thanks Meter: 26	6111 white lcd hi you can find this ic in all newer fones like 7610,6600,6670 it always beside the display ic in almost all the new nokias Daanish (Farhan)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5130 white screen when play video	fakhraei2000	Nokia Hardware & Hardware Repair	13	11-15-2010 04:54
6111 white screen	jeykhob	Nokia Hardware & Hardware Repair	5	12-04-2008 21:16
6111 white screen	fanbang	Nokia Hardware & Hardware Repair	16	05-16-2008 11:11
Nokia 6111 White screen problem	sia_26	Nokia Digital Core Technology 4 ( DCT-4 )	5	12-08-2007 00:56
6111 dead white screen	fastclip	Nokia Digital Core Technology 4 ( DCT-4 )	1	12-06-2006 12:37

10-16-2006, 13:10	#2 (permalink)
bbmad No Life Poster Join Date: Jul 2004 Age: 45 Posts: 747 Member: 71874 Status: Offline Thanks Meter: 34	Is the phone working apart from the white screen? ie can you make/receive calls or use the phone functions. Normally this problem is the flex cable or LCD. Majid www.mobilekrazy.com

10-18-2006, 08:21	#3 (permalink)
kubik256 Insane Poster Join Date: Jun 2005 Location: Czech rep. Age: 39 Posts: 86 Member: 154366 Status: Offline Thanks Meter: 5	I have the same problem... but I found the reason of the fault. The problem is broken µBGA filter next to LCD connector signed Z2501. Does anybody know which board has the same type of this BGA?? Thanx, BR.

12-06-2006, 13:46	#5 (permalink)
safeshop Insane Poster Join Date: Jul 2006 Posts: 64 Member: 314657 Status: Offline Thanks Meter: 2	i have this problem, changed the flex cable and it wasnt that, could it be that it needs a flash

12-06-2006, 20:44	#6 (permalink)
Jeffyoh88 Freak Poster Join Date: Jul 2006 Posts: 194 Member: 320354 Status: Offline Thanks Meter: 48	try change that cable ... and post result

12-21-2006, 05:06	#7 (permalink)
daanish Freak Poster Join Date: Aug 2004 Location: The great pakistan Posts: 384 Member: 79823 Status: Offline Thanks Meter: 26	hi all kubik's solution is the best the one with pic i solved the problem,since this fone is made as samsung desine so we all think it's the flex cable i thought that too.but the flex cable used in this fone is 100 times better then the one in samsung but still we think it's the cable fault any way we have to remember that nokia always uses the ICs to control LCDs in newer models so before changing the cable (to save the time) we must check the ICs and BGA filters wich is used in 7610 too thanks to kubik best regards Daanish(Farhan)

12-26-2006, 18:10	#10 (permalink)
astralis Freak Poster Join Date: Aug 2005 Location: Basarabia, Romania Posts: 250 Member: 174330 Status: Offline Sonork: 100.101441 Thanks Meter: 10	Thank you man. I will try this

01-18-2007, 10:04	#11 (permalink)
mobile world Freak Poster Join Date: Oct 2005 Location: Nigeria Posts: 155 Member: 194436 Status: Offline Thanks Meter: 12	No need to get another ic just bredge the two side together at the both ends. And send the result

01-30-2007, 07:58	#14 (permalink)
my toh Freak Poster Join Date: Sep 2005 Location: penang Posts: 163 Member: 183739 Status: Offline Thanks Meter: 11	can you show out by picture ?

01-30-2007, 11:40	#15 (permalink)
sulai2k Freak Poster Join Date: Jul 2006 Posts: 420 Member: 311025 Status: Offline Sonork: 100.1607375 Thanks Meter: 171	hai bro u change flux cable 100% ok