6210 hanging and switch off - GSM-Forum

pdm64 · 08-11-2002, 23:17

Hi!!!

I have a problem with this phone, after power on phone work perfect but if i press any key phone is resetting or hanging (only wenn i press key). What's a problem???

Sorry for my bad english and thanks for help.

PhoneUnlocker · 08-12-2002, 00:12

It is either...

1. Water damage,
2. The softwaare needs upgrading.

Open your phone and have a look for any blue marks on the PCB.... if there is any kind of water damage
or blue mould, you can try repiring it in a Ultra Sonic Bath (PCB Cleaner) if you know anyone with one.
If there is no damage there, try upgrading the softwar on it (latest version v5.56).

Or if you cant be arsed to mess around with it send it to me or take it to a local phone shop and ask them.

Regards,
Ed.

pdm64 · 08-12-2002, 00:52

Thanks for reply. My phone is not water damage and i test it with all soft for 6210 an 6250. This is hardware problem.
I forget yet add that this phone loss network.

F C · 08-12-2002, 08:47

buddy just change the rubber on/off rubbad pad--

tested 100% work--

regards
gohar

Pk2GSM · 08-12-2002, 10:44

Hi pdm64. I had the same problem with a 6210 some weeks ago. The problem was that the power button was constantly pressed and obstructed by the case, and when I touched any key phone restarted.
Take a look to see if it could be by that.

Regards.

pdm64 · 08-12-2002, 13:07

I change power switch and no results.

F C · 08-12-2002, 13:22

MAN ITS NOT THE POWER SWITCH-- JSUT THE RUBBER PAD WHICH TOUCHES THE ON/OFF SWITH- TRY TO CHANGE THAT OR IT SHOULD NOT TOUCH DIRECTLY TO THE SWITCH--

REGARDS
GOHAR

pdm64 · 08-12-2002, 13:50

Thanks for reply but this is not rubber. Phone is death now i can't power on and i can't flash it but wddog is working.

george gsm · 08-12-2002, 20:49

hi pdm64,
i think ali mola and pk2gsm are right. if is not results u can try to resoldering flash, ccont, cobba in this order. try the computer conection after each step
geo

ARC · 08-12-2002, 21:09

I think what vlinkers said is solution for presseing any key and phone is off

the problem is Phone HANGING AND RESETING

I think u should try Rehot FLASH AND RAM or replace them

It works for me 100%

willy · 08-12-2002, 21:17

ARC

You have good idea,, i agree with you !

Most is RAM have connect problem, so phone can not write or re-new data in RAM area , it become wrong data read/write in RAM, and make it hung !

i think, this phone was fall down ..

willy

Quote:

Originally posted by ARC
I think what vlinkers said is solution for presseing any key and phone is off

the problem is Phone HANGING AND RESETING

I think u should try Rehot FLASH AND RAM or replace them

It works for me 100%

pdm64 · 08-12-2002, 21:59

Thanks for all this is the flash ic but i don't have a hardware to repair it.

08-11-2002, 23:17	#1 (permalink)
pdm64 Junior Member Join Date: May 2002 Location: Poland Age: 44 Posts: 24 Member: 11485 Status: Offline Thanks Meter: 0	6210 hanging and switch off Hi!!! I have a problem with this phone, after power on phone work perfect but if i press any key phone is resetting or hanging (only wenn i press key). What's a problem??? Sorry for my bad english and thanks for help.

08-12-2002, 21:09	#10 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	ARC I think what vlinkers said is solution for presseing any key and phone is off the problem is Phone HANGING AND RESETING I think u should try Rehot FLASH AND RAM or replace them It works for me 100%

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6555 hang then switch off	jamohaki	Nokia Hardware & Hardware Repair	1	03-08-2011 08:14
1208 hang after 10 second and switch off	umesh garg	Nokia Hardware & Hardware Repair	23	09-28-2009 20:01
nokia 2610 hang and switch off.	barthosyn	Nokia Hardware & Hardware Repair	7	06-05-2009 19:47
nokia 6600 hang and power-off after pincode off	rovick	Nokia Multimedia	3	08-04-2008 12:23
E700 Keypad Hang Then Switch Off	jamohaki	Samsung Hardware Repair	2	11-02-2007 06:02

08-12-2002, 00:12	#2 (permalink)
PhoneUnlocker Crazy Poster Join Date: Jul 2002 Location: UK Age: 41 Posts: 50 Member: 14218 Status: Offline Thanks Meter: 0	It is either... 1. Water damage, 2. The softwaare needs upgrading. Open your phone and have a look for any blue marks on the PCB.... if there is any kind of water damage or blue mould, you can try repiring it in a Ultra Sonic Bath (PCB Cleaner) if you know anyone with one. If there is no damage there, try upgrading the softwar on it (latest version v5.56). Or if you cant be arsed to mess around with it send it to me or take it to a local phone shop and ask them. Regards, Ed.

08-12-2002, 00:52	#3 (permalink)
pdm64 Junior Member Join Date: May 2002 Location: Poland Age: 44 Posts: 24 Member: 11485 Status: Offline Thanks Meter: 0	Thanks for reply. My phone is not water damage and i test it with all soft for 6210 an 6250. This is hardware problem. I forget yet add that this phone loss network.

08-12-2002, 08:47	#4 (permalink)
F C No Life Poster Join Date: Sep 2001 Location: London, UK Posts: 2,294 Member: 6486 Status: Offline Sonork: 100.79846 Thanks Meter: 350	buddy just change the rubber on/off rubbad pad-- tested 100% work-- regards gohar

08-12-2002, 10:44	#5 (permalink)
Pk2GSM Crazy Poster Join Date: May 2002 Location: Spain Posts: 50 Member: 11983 Status: Offline Thanks Meter: 0	Hi pdm64. I had the same problem with a 6210 some weeks ago. The problem was that the power button was constantly pressed and obstructed by the case, and when I touched any key phone restarted. Take a look to see if it could be by that. Regards.

08-12-2002, 13:07	#6 (permalink)
pdm64 Junior Member Join Date: May 2002 Location: Poland Age: 44 Posts: 24 Member: 11485 Status: Offline Thanks Meter: 0	I change power switch and no results.

08-12-2002, 13:22	#7 (permalink)
F C No Life Poster Join Date: Sep 2001 Location: London, UK Posts: 2,294 Member: 6486 Status: Offline Sonork: 100.79846 Thanks Meter: 350	MAN ITS NOT THE POWER SWITCH-- JSUT THE RUBBER PAD WHICH TOUCHES THE ON/OFF SWITH- TRY TO CHANGE THAT OR IT SHOULD NOT TOUCH DIRECTLY TO THE SWITCH-- REGARDS GOHAR

08-12-2002, 13:50	#8 (permalink)
pdm64 Junior Member Join Date: May 2002 Location: Poland Age: 44 Posts: 24 Member: 11485 Status: Offline Thanks Meter: 0	Thanks for reply but this is not rubber. Phone is death now i can't power on and i can't flash it but wddog is working.

08-12-2002, 20:49	#9 (permalink)
george gsm No Life Poster Join Date: Jul 2002 Location: Bucharest-Romania Age: 51 Posts: 1,160 Member: 14200 Status: Offline Sonork: Sonork id Thanks Meter: 117	hi pdm64, i think ali mola and pk2gsm are right. if is not results u can try to resoldering flash, ccont, cobba in this order. try the computer conection after each step geo

08-12-2002, 21:59	#12 (permalink)
pdm64 Junior Member Join Date: May 2002 Location: Poland Age: 44 Posts: 24 Member: 11485 Status: Offline Thanks Meter: 0	Thanks for all this is the flash ic but i don't have a hardware to repair it.