6260 no display - GSM-Forum

MARKIE41 · 09-12-2005, 02:21

6260 no display change the flex (original) still desame .any hardware solution for this problem

goffaman · 09-12-2005, 03:07

have you tried software repair?

goffaman · 09-12-2005, 03:08

or better check the dispaly controller or cracks or defects.. better reheat it first
B.R>

MARKIE41 · 09-12-2005, 11:57

already flaSh the unit still desame i think its a hardware deffect but any way tnx for the reply ,i found the solution at sevgsm thread

usernome · 06-29-2006, 08:14

And the solution is ... ???????

glenntelecom · 06-29-2006, 15:35

Quote:

Originally Posted by MARKIE41

6260 no display change the flex (original) still desame .any hardware solution for this problem

are you sure your flex is ok?what kind of flex did you replce for your unit,is it the flex without connector or with connector?i have change flex many times with connector on it,all of them are solve.but i have tried also using the flex without connector not all of them are solve.my dear friend my advice is beeter use the flex with connector.ist 100% ok.

nasarbridco · 06-29-2006, 15:48

check the disp ic
..................................

phone@studio · 07-29-2006, 16:07

Quote:

Originally Posted by MARKIE41

6260 no display change the flex (original) still desame .any hardware solution for this problem

dear friend,all you have to do is change the lcd but if still the same,reformat user are and all will be ok

bossko · 11-27-2006, 19:25

Hi friends, I have one 6260 where was broken LCD. After change it with original one from N91, I have only black screen with lighting. I was try write PM, format user area, flash latest 5.05360, rehot Z401 -Z402, change flex and still same problem. Iwas try remove Z401 - Z402 and after this I have white screen. I think its incompatible LCD from N91, but it was from original NOKIA service and they says its sure compatible! I think its some like special LCD for 7250. What are you mean? Thanx for any help.

TOZE · 08-13-2007, 13:38

i have flash it with JAF (factory reset ...) all is ok and LCD is power on now !!!

thanks fryes

09-12-2005, 02:21	#1 (permalink)
MARKIE41 Freak Poster Join Date: Jun 2004 Location: mars Age: 45 Posts: 324 Member: 69445 Status: Offline Thanks Meter: 12	6260 no display 6260 no display change the flex (original) still desame .any hardware solution for this problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3 no display,no display light	celluniversal	Motorola P2k	21	11-21-2011 06:57
L7 no display and no lights in display, tricks enside..	ticksjarub	Motorola Hardware Repair	4	09-18-2010 17:30
5800 Display Problem (With Display On FBUS Cable But No Display using Regular Battery	eyestrain	Nokia Base Band 5 ( BB-5 )	1	06-21-2009 20:11
V3 No Display N No Display Light?	jimmyyew	Motorola Hardware Repair	4	05-27-2008 08:33
6260 no LCD	Rhamses	Nokia Hardware & Hardware Repair	14	05-08-2005 01:36

09-12-2005, 03:07	#2 (permalink)
goffaman Freak Poster Join Date: Jul 2005 Location: cebu Age: 43 Posts: 388 Member: 164237 Status: Offline Thanks Meter: 12	have you tried software repair?

09-12-2005, 03:08	#3 (permalink)
goffaman Freak Poster Join Date: Jul 2005 Location: cebu Age: 43 Posts: 388 Member: 164237 Status: Offline Thanks Meter: 12	or better check the dispaly controller or cracks or defects.. better reheat it first B.R>

09-12-2005, 11:57	#4 (permalink)
MARKIE41 Freak Poster Join Date: Jun 2004 Location: mars Age: 45 Posts: 324 Member: 69445 Status: Offline Thanks Meter: 12	already flaSh the unit still desame i think its a hardware deffect but any way tnx for the reply ,i found the solution at sevgsm thread

06-29-2006, 08:14	#5 (permalink)
usernome No Life Poster Join Date: Jan 2003 Location: Iassy Age: 59 Posts: 4,314 Member: 19723 Status: Offline Thanks Meter: 359	And the solution is ... ???????

06-29-2006, 15:48	#7 (permalink)
nasarbridco Junior Member Join Date: Jun 2006 Posts: 3 Member: 302756 Status: Offline Thanks Meter: 0	check the disp ic ..................................

11-27-2006, 19:25	#9 (permalink)
bossko No Life Poster Join Date: Nov 2002 Location: slovakia Age: 46 Posts: 1,027 Member: 17761 Status: Offline Thanks Meter: 91	Hi friends, I have one 6260 where was broken LCD. After change it with original one from N91, I have only black screen with lighting. I was try write PM, format user area, flash latest 5.05360, rehot Z401 -Z402, change flex and still same problem. Iwas try remove Z401 - Z402 and after this I have white screen. I think its incompatible LCD from N91, but it was from original NOKIA service and they says its sure compatible! I think its some like special LCD for 7250. What are you mean? Thanx for any help.

08-13-2007, 13:38	#10 (permalink)
TOZE No Life Poster Join Date: Feb 2004 Location: GSM-CLINIQUE.COM, SOUTH COAST Age: 43 Posts: 708 Member: 54945 Status: Offline Thanks Meter: 22	i have flash it with JAF (factory reset ...) all is ok and LCD is power on now !!! thanks fryes