6260 screen - GSM-Forum

thnys · 01-12-2007, 02:43

My screen gives sometimes as blurry double image. For example, sometimes i see the nokia double and gausy when i start up my cell phone.

Greets

Lhick · 01-12-2007, 02:53

Clean Flex Contacts First, still the Same replace UI Board.

thnys · 01-12-2007, 03:08

Quote:

Originally Posted by Lhick

Clean Flex Contacts First, still the Same replace UI Board.

Can you specify your solution, i'm quite a newbie.

.::koolfriend4u::. · 01-12-2007, 03:39

hai thnys,
its purely display strip problm..check d display connector in ur main boar..or bettr try to change the strip...but its ridiculous to change,if not change d complete set of display wth strip
good luck

Lhick · 01-12-2007, 03:46

Clean the contact on the Mainboard the other on LCD connector.

uneternity · 01-12-2007, 08:28

ccheak the lcd diode ic's 25pin .. ter's a small one nearby flex cable connector 6pin... reheat reball or replace should solve your prob
regards

puneet14884 · 01-12-2007, 10:50

replace flexi strip.....all fine....do post result

01-12-2007, 02:43	#1 (permalink)
thnys Junior Member Join Date: Jan 2007 Posts: 3 Member: 427629 Status: Offline Thanks Meter: 0	6260 screen My screen gives sometimes as blurry double image. For example, sometimes i see the nokia double and gausy when i start up my cell phone. Greets

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6260 white screen	Toner0	WD2 & APE (Symbian Phones)	16	09-18-2010 16:58
6260 white screen then 15 sec turns off	sharkie2006	Nokia Hardware & Hardware Repair	3	09-28-2009 11:32
6260 garbled screen after resume from screen saver	jpi_7	WD2 & APE (Symbian Phones)	0	12-02-2007 23:53
6260 screen problem	zaki847	Nokia Hardware & Hardware Repair	5	08-12-2007 13:26
6260 white screen	jenlaire	Nokia Hardware & Hardware Repair	3	02-21-2006 22:07

01-12-2007, 02:53	#2 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	Clean Flex Contacts First, still the Same replace UI Board.

01-12-2007, 03:39	#4 (permalink)
.::koolfriend4u::. No Life Poster Join Date: Nov 2005 Posts: 1,478 Member: 200145 Status: Offline Sonork: 100.1596786 Thanks Meter: 677	hai thnys, its purely display strip problm..check d display connector in ur main boar..or bettr try to change the strip...but its ridiculous to change,if not change d complete set of display wth strip good luck

01-12-2007, 03:46	#5 (permalink)
Lhick No Life Poster Join Date: Aug 2006 Location: InsideOut Posts: 5,657 Member: 333359 Status: Offline Thanks Meter: 91	Clean the contact on the Mainboard the other on LCD connector.

01-12-2007, 08:28	#6 (permalink)
uneternity Freak Poster Join Date: Dec 2004 Age: 47 Posts: 229 Member: 101007 Status: Offline Thanks Meter: 27	ccheak the lcd diode ic's 25pin .. ter's a small one nearby flex cable connector 6pin... reheat reball or replace should solve your prob regards

01-12-2007, 10:50	#7 (permalink)
puneet14884 No Life Poster Join Date: Nov 2006 Location: guangzhou,CHINA & delhi,INDIA Posts: 569 Member: 399779 Status: Offline Thanks Meter: 125	replace flexi strip.....all fine....do post result