6280 Missing IC - GSM-Forum

ajubaba · 03-14-2008, 07:20

Hello to all members,

I am working on 6280 for Blank LCD. Changed LCD, LCD Driver IC but no success.

Upon examining the board carefull I found a IC is missing. Which I think gives voltage to FM (Correct me if I am wrong). The pic is upload.

Kindly tell me in which board this is available. and where it will be.

Thanks a Lot.

Aju

ajubaba · 03-17-2008, 05:54

Anybody, please help.

mobilespeed · 03-17-2008, 07:25

u can also use alternative voltage 2.8v.it is necessary if missing blank lcd and fm problem .

ajubaba · 03-18-2008, 05:32

Quote:

Originally Posted by mobilespeed

u can also use alternative voltage 2.8v.it is necessary if missing blank lcd and fm problem .

First of all thanks for your reply. Second You mean to jumper it from the leg of this IC where there is 2.8v to the marked component.

mobilespeed · 03-18-2008, 05:38

Quote:

Originally Posted by ajubaba

First of all thanks for your reply. Second You mean to jumper it from the leg of this IC where there is 2.8v to the marked component.

" check the 2.8 any where from the board & fire. best of luck"

Sagitarious · 03-18-2008, 08:13

Make this jumper`s and tell me the progress.

03-17-2008, 07:25	#3 (permalink)
mobilespeed No Life Poster Join Date: Feb 2008 Posts: 760 Member: 706300 Status: Offline Thanks Meter: 147	u can also use alternative voltage 2.8v.it is necessary if missing blank lcd and fm problem . Last edited by mobilespeed; 02-27-2009 at 06:37.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6280 keypad ic	beboo	Nokia Hardware & Hardware Repair	22	05-16-2011 09:46
W300 dead, missing IC	Mobileforce	Sony Ericsson Hardware Repair	5	04-09-2007 22:48
6280 flash ic proplem	moustafatch	Nokia Hardware & Hardware Repair	0	03-29-2007 16:38

03-17-2008, 05:54	#2 (permalink)
ajubaba Freak Poster Join Date: Mar 2005 Location: Dombivli (E) Age: 48 Posts: 275 Member: 124938 Status: Offline Thanks Meter: 69	Anybody, please help.