6310i LCD module - GSM-Forum

Ladi · 02-07-2004, 21:12

Hi,

I've got an LCD module in a 6310i where about 5 horizontal rows in the middle of the display are missing (LCD test with Prodigy). I guess the contact strip between the plastic cover and the LCD glass is broken or at least dirty.

Is it possible to remove the plastic cover from the LCD body to clean the contact strip without destroying the LCD?

Thanks,
Ladi

MrHazeem · 02-08-2004, 19:47

I did not try it but i think u can do it...

good luck

--------------
MrHazeem

ARS · 02-08-2004, 21:08

propably your lcd is damaged, need a new one

MAJESTIC PIRATE · 02-10-2004, 02:04

check small resistors above the right part of battery socket , then check the lines from them to lcd pins . and good luck

joegsmro · 02-10-2004, 08:03

Don`t waist Your time the display is the problem change it .Regards JOE.

silveraxe · 04-11-2006, 14:53

Quote:

Originally Posted by MAJESTIC PIRATE

check small resistors above the right part of battery socket , then check the lines from them to lcd pins . and good luck

Thank you for this great reply,
way above the right hand battery pins are about 5 small components, the 2 small resistors are most of the time shorting and not linked to the lcs lines on the pcb. pin 2 esp links to the resistor and now

100% WORKING !!!

thanks bro, wbr

02-07-2004, 21:12	#1 (permalink)
Ladi Junior Member Join Date: Dec 2003 Posts: 11 Member: 47246 Status: Offline Thanks Meter: 0	6310i LCD module Hi, I've got an LCD module in a 6310i where about 5 horizontal rows in the middle of the display are missing (LCD test with Prodigy). I guess the contact strip between the plastic cover and the LCD glass is broken or at least dirty. Is it possible to remove the plastic cover from the LCD body to clean the contact strip without destroying the LCD? Thanks, Ladi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6310i LCD blinking	floky	Nokia Hardware & Hardware Repair	4	05-29-2006 10:22
6310i LCD no display problem	adeel786	Nokia Digital Core Technology 4 ( DCT-4 )	0	05-28-2006 14:19
6310i LCD ---> 6310	livewirecebu	Nokia Digital Core Technology 4 ( DCT-4 )	3	04-13-2005 10:09
6310i LCD colours	jnf	Nokia Hardware & Hardware Repair	3	02-18-2004 00:40
6310i LCD	bzpsmachine	Nokia Hardware & Hardware Repair	4	02-01-2004 23:41

02-08-2004, 19:47	#2 (permalink)
MrHazeem Freak Poster Join Date: Jul 2002 Location: MAD Age: 50 Posts: 483 Member: 13545 Status: Offline Thanks Meter: 2	I did not try it but i think u can do it... good luck -------------- MrHazeem

02-08-2004, 21:08	#3 (permalink)
ARS No Life Poster Join Date: Dec 2000 Location: Slovakia, Brezno Posts: 980 Member: 2721 Status: Offline Thanks Meter: 23	propably your lcd is damaged, need a new one

02-10-2004, 02:04	#4 (permalink)
MAJESTIC PIRATE Freak Poster Join Date: Dec 2003 Location: E G Y P T Age: 47 Posts: 336 Member: 45635 Status: Offline Thanks Meter: 20	check small resistors above the right part of battery socket , then check the lines from them to lcd pins . and good luck

02-10-2004, 08:03	#5 (permalink)
joegsmro Freak Poster Join Date: Apr 2002 Posts: 212 Member: 11352 Status: Offline Thanks Meter: 7	Don`t waist Your time the display is the problem change it .Regards JOE.