6600 after some time white screen - GSM-Forum

shoeb7 · 10-03-2006, 16:19

This cell is all ok display also works fine ,but after 5 or 7 minutes the display goes blank and when press any key only white screen appears.i can make make and receive call .

I flash the cell with jaf using latest ver flashing process was ok but when format phone using jaf the jaf failed to do this..
i then did manual formating.

after all this works the problem was the same white screen after 5 min.

regards

Ashiq Rasoul · 10-03-2006, 18:06

Reball display filter ic located below the connector if problem not solve then change it set will be ok

awi ponsel · 10-03-2006, 19:47

I think,this merely damage at lcd connector.
resolder or change B to B lcd connector was solve ur problem bro.

prmzin · 10-03-2006, 20:23

hi
had same problem solved with a new display so before digging the ic confirm your display from other working phone.

anjumm98 · 09-08-2007, 20:19

i have changed these two ic's but the result is same doted LCD in the start the phone and then white !!!

Unggul · 09-08-2007, 22:47

Quote:

Originally Posted by anjumm98

i have changed these two ic's but the result is same doted LCD in the start the phone and then white !!!

Check the tracks sir...

BR

must be · 09-09-2007, 16:17

hi bro u plz check its filter ic below the connector it will be help u

sudais_rizwan · 09-09-2007, 16:29

thats wat you have to check on the PCB

khem · 09-09-2007, 17:08

Quote:

Originally Posted by sudais_rizwan

thats wat you have to check on the PCB

thnx 4 pik...................

HUM · 09-10-2007, 00:08

change display.......................................!

kanapuza · 09-10-2007, 08:58

Quote:

Originally Posted by shoeb7

This cell is all ok display also works fine ,but after 5 or 7 minutes the display goes blank and when press any key only white screen appears.i can make make and receive call .

I flash the cell with jaf using latest ver flashing process was ok but when format phone using jaf the jaf failed to do this..
i then did manual formating.

after all this works the problem was the same white screen after 5 min.

regards

brother change the display connector. i had same prblm

meo786pk · 09-10-2007, 09:19

Dear brother,

First of all check the lcd connector
Second change the lcd
check the lcd ways.

Muhammad Afzal Meo

Quote:

Originally Posted by shoeb7

This cell is all ok display also works fine ,but after 5 or 7 minutes the display goes blank and when press any key only white screen appears.i can make make and receive call .

I flash the cell with jaf using latest ver flashing process was ok but when format phone using jaf the jaf failed to do this..
i then did manual formating.

after all this works the problem was the same white screen after 5 min.

regards

cellterrorist_0 · 09-10-2007, 09:28

sir better replace lcd i already encounter that problem..

10-03-2006, 16:19	#1 (permalink)
shoeb7 No Life Poster Join Date: Nov 2005 Location: india Age: 47 Posts: 859 Member: 196194 Status: Offline Thanks Meter: 47	6600 after some time white screen This cell is all ok display also works fine ,but after 5 or 7 minutes the display goes blank and when press any key only white screen appears.i can make make and receive call . I flash the cell with jaf using latest ver flashing process was ok but when format phone using jaf the jaf failed to do this.. i then did manual formating. after all this works the problem was the same white screen after 5 min. regards

09-09-2007, 16:17	#7 (permalink)
must be Insane Poster Join Date: Apr 2006 Location: Lahore.pk Age: 37 Posts: 64 Member: 259909 Status: Offline Thanks Meter: 4	hi hi bro u plz check its filter ic below the connector it will be help u

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w850i some time working display some time white display	prakash40	Sony Ericsson Hardware Repair	2	09-24-2009 08:47
se k750i white screen after some time	nomi	Sony Ericsson Hardware Repair	4	11-14-2008 09:09
n72-5 some time white screen and auto on	shani72	Nokia Hardware & Hardware Repair	1	08-05-2008 07:36
7610 white screen after some time	pakmobiles	WD2 & APE (Symbian Phones)	1	03-23-2008 17:22
6630 white screen after some time	Gr8SightMan	Nokia Base Band 5 ( BB-5 )	2	11-24-2007 16:26

10-03-2006, 18:06	#2 (permalink)
Ashiq Rasoul Freak Poster Join Date: Jan 2005 Age: 41 Posts: 198 Member: 108629 Status: Offline Thanks Meter: 16	Reball display filter ic located below the connector if problem not solve then change it set will be ok

10-03-2006, 19:47	#3 (permalink)
awi ponsel Junior Member Join Date: Jan 2006 Location: xentar home town Posts: 24 Member: 217574 Status: Offline Thanks Meter: 2	I think,this merely damage at lcd connector. resolder or change B to B lcd connector was solve ur problem bro.

10-03-2006, 20:23	#4 (permalink)
prmzin Freak Poster Join Date: Feb 2004 Age: 45 Posts: 165 Member: 54900 Status: Offline Thanks Meter: 11	hi had same problem solved with a new display so before digging the ic confirm your display from other working phone.

09-08-2007, 20:19	#5 (permalink)
anjumm98 Freak Poster Join Date: May 2006 Location: In Mobile Lab Posts: 268 Member: 278476 Status: Offline Sonork: 100.1592375 Thanks Meter: 119	i have changed these two ic's but the result is same doted LCD in the start the phone and then white !!!

09-10-2007, 00:08	#10 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	change display.......................................!

09-10-2007, 09:28	#13 (permalink)
cellterrorist_0 Crazy Poster Join Date: May 2007 Location: Philippines Posts: 57 Member: 501364 Status: Offline Thanks Meter: 14	sir better replace lcd i already encounter that problem..