6600 contact retailer - GSM-Forum

nolyboy · 11-26-2005, 05:31

i have flash 6600 its contact retailer after an hour or days it keeps going like that any ideas???

inat · 11-26-2005, 05:57

Quote:

Originally Posted by nolyboy

i have flash 6600 its contact retailer after an hour or days it keeps going like that any ideas???

does the UEM already replace???

nolyboy · 11-26-2005, 07:39

does uem have to do something with it????

mas comm · 11-26-2005, 09:31

Quote:

Originally Posted by nolyboy

i have flash 6600 its contact retailer after an hour or days it keeps going like that any ideas???

format ur mobile ur problm would be solved.

fugiri · 11-26-2005, 20:51

Formating of the mobile. taakes care of the problem, however if after reading info and its still powering on and off: check the UEM

Good Luck

nolyboy · 11-29-2005, 06:28

i did format after few hours still the same anything else??

sheikhje · 11-29-2005, 08:53

it's have easy salotion.detect phone with griffin.than go sepacial function and click on set to factory LM.it will give u faild massege.dont wory now u click foctory reset default.it will give u faild massege.don't worry.try this 2 or 3 time.always u get this massege.now disconect set to cable.and check now.
it is 100% tested salotion.
100% 100% 100%

nolyboy · 11-30-2005, 01:21

Quote:

Originally Posted by sheikhje

it's have easy salotion.detect phone with griffin.than go sepacial function and click on set to factory LM.it will give u faild massege.dont wory now u click foctory reset default.it will give u faild massege.don't worry.try this 2 or 3 time.always u get this massege.now disconect set to cable.and check now.
it is 100% tested salotion.
100% 100% 100%

tnx dude but i got only twister and jaf flasher

bestman · 11-30-2005, 09:26

Quote:

Originally Posted by sheikhje

it's have easy salotion.detect phone with griffin.than go sepacial function and click on set to factory LM.it will give u faild massege.dont wory now u click foctory reset default.it will give u faild massege.don't worry.try this 2 or 3 time.always u get this massege.now disconect set to cable.and check now.
it is 100% tested salotion.
100% 100% 100%

this application is ok.....

bestman

SCOOTER_R · 11-30-2005, 09:53

Quote:

Originally Posted by nolyboy

i have flash 6600 its contact retailer after an hour or days it keeps going like that any ideas???

you need chek "format user area" with ufs

NITINWADHWA_NIT · 11-30-2005, 10:35

Quote:

Originally Posted by nolyboy

tnx dude but i got only twister and jaf flasher

dear frnd,

reboll cpu or ram i.c(glass i.c)

Mourad120 · 12-02-2005, 12:41

go into local mode ..
make full factory default
switch into normal mode ..if the probem persists just format user eara and ur phone will be fine .
make sure that mcu matches ppm version .

kingsphonz · 12-03-2005, 00:20

if u have 6600 PM files, erase flash first, flash second, format third, write PM files and then do UI settings good luck

inat · 12-03-2005, 01:41

Quote:

Originally Posted by nolyboy

does uem have to do something with it????

maybe, upp, flash ic#2 or pcb fault

nolyboy · 12-08-2005, 02:13

tnx guys i will try again

11-26-2005, 05:31	#1 (permalink)
nolyboy No Life Poster Join Date: Nov 2005 Location: PHIL Posts: 981 Member: 197247 Status: Offline Thanks Meter: 296	6600 contact retailer i have flash 6600 its contact retailer after an hour or days it keeps going like that any ideas???

11-26-2005, 07:39	#3 (permalink)
nolyboy No Life Poster Join Date: Nov 2005 Location: PHIL Posts: 981 Member: 197247 Status: Offline Thanks Meter: 296	hi does uem have to do something with it????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6600 contact retailer after flahing with ufs2..?	sudeeshveekey	UFS2 + UFS3-Tornadoflasher	8	12-14-2004 21:45
6600 contact retailer ( i need to save contacts )	CMV_2K	WD2 & APE (Symbian Phones)	2	11-01-2004 08:43
6600 contact retailer	Geni	Griffin	10	05-23-2004 14:54
6600 Contact Retailer	SKYPHONE	WD2 & APE (Symbian Phones)	5	01-03-2004 18:35

11-26-2005, 20:51	#5 (permalink)
fugiri Junior Member Join Date: Jan 2005 Age: 53 Posts: 26 Member: 103395 Status: Offline Thanks Meter: 1	Formating of the mobile. taakes care of the problem, however if after reading info and its still powering on and off: check the UEM Good Luck

11-29-2005, 06:28	#6 (permalink)
nolyboy No Life Poster Join Date: Nov 2005 Location: PHIL Posts: 981 Member: 197247 Status: Offline Thanks Meter: 296	i did format after few hours still the same anything else??

11-29-2005, 08:53	#7 (permalink)
sheikhje Freak Poster Join Date: Oct 2005 Posts: 308 Member: 193959 Status: Offline Thanks Meter: 22	it's have easy salotion.detect phone with griffin.than go sepacial function and click on set to factory LM.it will give u faild massege.dont wory now u click foctory reset default.it will give u faild massege.don't worry.try this 2 or 3 time.always u get this massege.now disconect set to cable.and check now. it is 100% tested salotion. 100% 100% 100%

12-02-2005, 12:41	#12 (permalink)
Mourad120 Freak Poster Join Date: Jun 2005 Location: http://www.paybox.me/r/mourad1 Age: 47 Posts: 358 Member: 155016 Status: Offline Thanks Meter: 130	go into local mode .. make full factory default switch into normal mode ..if the probem persists just format user eara and ur phone will be fine . make sure that mcu matches ppm version .

12-03-2005, 00:20	#13 (permalink)
kingsphonz Junior Member Join Date: Nov 2005 Posts: 38 Member: 203942 Status: Offline Thanks Meter: 0	if u have 6600 PM files, erase flash first, flash second, format third, write PM files and then do UI settings good luck

12-08-2005, 02:13	#15 (permalink)
nolyboy No Life Poster Join Date: Nov 2005 Location: PHIL Posts: 981 Member: 197247 Status: Offline Thanks Meter: 296	tnx guys i will try again