6600 light - GSM-Forum

sebla · 03-18-2006, 14:18

Hi to all can somebodyhelp me for a 6600 no light...the board i'ts ok but the problem is on display.
Thanks in advance

kardelen gsm · 03-18-2006, 14:29

display change or check picture..regards

cellco_mann · 03-18-2006, 15:02

Quote:

Originally Posted by kardelen gsm

display change or check picture..regards

Good solution But pls give clear picture.

..::ArchitRaj::.. · 03-19-2006, 11:47

isse clear kya hogi
[email protected]

bingo_888 · 03-19-2006, 13:19

hi,
check LCD first, replace LCD from good unit for checking, if still the same check LCD connector. if still the same reheat or replace LCD IC

sebla · 03-20-2006, 10:56

Quote:

Originally Posted by kardelen gsm

display change or check picture..regards

Thank u for good solution...

03-18-2006, 14:18	#1 (permalink)
sebla Junior Member Join Date: Jul 2001 Location: Italy Age: 60 Posts: 37 Member: 5105 Status: Offline Thanks Meter: 0	6600 light Hi to all can somebodyhelp me for a 6600 no light...the board i'ts ok but the problem is on display. Thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N 70 light rob.	ASHISH2904	Nokia Hardware & Hardware Repair	1	03-29-2010 10:52
Nokia 6600 Light	LIONMOBILE	Nokia Hardware & Hardware Repair	13	05-28-2009 20:20
6600 light	LIONMOBILE	Nokia Hardware & Hardware Repair	2	07-15-2007 14:52
6600 light...	LIONMOBILE	Nokia Hardware & Hardware Repair	7	02-12-2006 11:06
Nokia 6600 light blue screen error	chyned	WD2 & APE (Symbian Phones)	1	11-25-2005 16:16

03-19-2006, 11:47	#4 (permalink)
..::ArchitRaj::.. No Life Poster Join Date: Sep 2005 Location: Uttaranchal Age: 35 Posts: 2,504 Member: 181696 Status: Offline Sonork: 100.107830 Thanks Meter: 5,406	isse clear kya hogi [email protected]

03-19-2006, 13:19	#5 (permalink)
bingo_888 Freak Poster Join Date: Feb 2006 Posts: 384 Member: 234955 Status: Offline Thanks Meter: 19	hi, check LCD first, replace LCD from good unit for checking, if still the same check LCD connector. if still the same reheat or replace LCD IC