6600 white lcd - GSM-Forum

The Repair Shop · 11-20-2005, 13:57

Please look at the below pic off a 6600 lcd, the lcd has being changed twisce with new one's but it still has a white lcd

any ideas what this could? and how to fix?

cheers

The Repair Shop · 11-21-2005, 16:41

Can anyone help? with this

gama_cell99 · 11-21-2005, 17:37

me too i have same prob

did any body have solutionhs..........?????????

preeyan · 11-22-2005, 16:30

100% display or display connector problem.

wfm · 11-22-2005, 18:00

lcd is damege only or check the connector

XXMEN · 11-22-2005, 18:26

try this solution maybe can help you!

syedali · 11-22-2005, 20:00

nokia 6600 problam key pad.i am chanage key pad ic after set is hang & pawer off what problam anybady tell me

ezzelsadany · 12-18-2005, 02:18

HI
eraseflash ifu found the masage : Erase Flash Error - in the address(startaddress:02000000-end address :027fffff) that is mean bad flash IC(replace the second one) if the massage still replace the4 flash ICS.
if massage disappeares make fullflash. if problem still UPP is probably fault it is asked for writting on LCD. goodluck.Thanks

muksforu · 12-19-2005, 12:22

it's display connector problem.. change the display connector

muksforu · 12-19-2005, 12:41

check it br if it help....

goffaman · 12-21-2005, 07:00

Quote:

Originally Posted by Simzmobiles

Please look at the below pic off a 6600 lcd, the lcd has being changed twisce with new one's but it still has a white lcd
any ideas what this could? and how to fix?
cheers

if not lcd connector problem, then try to flash it properly... if still the same problem, it might be UPP problem

Anil Kumar · 12-21-2005, 07:16

Quote:

Originally Posted by goffaman

if not lcd connector problem, then try to flash it properly... if still the same problem, it might be UPP problem

man check lcd jack and rehot glass ic near jack
this soluiton working for me twice

waleed2 · 12-21-2005, 07:19

i think its ic lcd .tru to change it

Anil Kumar · 12-21-2005, 07:20

Quote:

Originally Posted by syedali

nokia 6600 problam key pad.i am chanage key pad ic after set is hang & pawer off what problam anybady tell me

remove the key pad id and post result
if problam same u can check near component shorting

MUNEEB_AKHTAR_RAZA · 12-21-2005, 08:34

I think its the problem of display crystel ic ......If not first check it then its the problem of uem................try and post result....Ok
Br
Muneeb Akhtar Raza

11-20-2005, 13:57	#1 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,728 Member: 307549 Status: Offline Thanks: 242 Thanked 167 Times in 113 Posts	6600 white lcd Please look at the below pic off a 6600 lcd, the lcd has being changed twisce with new one's but it still has a white lcd any ideas what this could? and how to fix? cheers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6600 White Lcd	W4r10rD	Nokia Hardware & Hardware-Repair Area	23	01-25-2008 08:19
help me 6600 white lcd _what can i do	ahlawy6137	WD2 & APE (Symbian Phones)	2	12-08-2006 04:24
7610,6600 White Lcd	FasGsm	Nokia Hardware & Hardware-Repair Area	1	08-17-2006 09:23
6600 white lcd...	Byte	Nokia Hardware & Hardware-Repair Area	11	05-18-2005 15:38
6600 White Lcd	FITOS	WD2 & APE (Symbian Phones)	5	02-28-2005 07:11

11-21-2005, 16:41	#2 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,728 Member: 307549 Status: Offline Thanks: 242 Thanked 167 Times in 113 Posts	Can anyone help? with this

11-21-2005, 17:37	#3 (permalink)
gama_cell99 Freak Poster Join Date: Nov 2004 Age: 34 Posts: 300 Member: 92067 Status: Offline Thanks: 45 Thanked 8 Times in 5 Posts	me too i have same prob did any body have solutionhs..........?????????

11-22-2005, 16:30	#4 (permalink)
preeyan Junior Member Join Date: Feb 2005 Age: 38 Posts: 24 Member: 120046 Status: Offline Thanks: 0 Thanked 17 Times in 3 Posts	100% display or display connector problem.

11-22-2005, 18:00	#5 (permalink)
wfm Junior Member Join Date: Nov 2005 Posts: 5 Member: 200896 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	lcd is damege only or check the connector

11-22-2005, 20:00	#7 (permalink)
syedali Junior Member Join Date: Jun 2005 Age: 43 Posts: 13 Member: 151039 Status: Offline Thanks: 2 Thanked 0 Times in 0 Posts	nokia 6600 problam key pad.i am chanage key pad ic after set is hang & pawer off what problam anybady tell me

12-18-2005, 02:18	#8 (permalink)
ezzelsadany Junior Member Join Date: Nov 2005 Posts: 20 Member: 202427 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	HI eraseflash ifu found the masage : Erase Flash Error - in the address(startaddress:02000000-end address :027fffff) that is mean bad flash IC(replace the second one) if the massage still replace the4 flash ICS. if massage disappeares make fullflash. if problem still UPP is probably fault it is asked for writting on LCD. goodluck.Thanks

12-19-2005, 12:22	#9 (permalink)
muksforu No Life Poster Join Date: Jan 2004 Location: India Age: 32 Posts: 545 Member: 50805 Status: Offline Thanks: 77 Thanked 69 Times in 32 Posts	it's display connector problem.. change the display connector

12-21-2005, 07:19	#13 (permalink)
waleed2 No Life Poster Join Date: Oct 2004 Location: IN ISLAM HEART Age: 28 Posts: 1,221 Member: 85387 Status: Offline Thanks: 93 Thanked 77 Times in 52 Posts	i think its ic lcd .tru to change it

12-21-2005, 08:34	#15 (permalink)
MUNEEB_AKHTAR_RAZA No Life Poster Join Date: Jun 2005 Location: Timeless zone! Age: 24 Posts: 1,662 Member: 152244 Status: Offline Sonork: 100.1591179 Thanks: 12 Thanked 138 Times in 95 Posts	I think its the problem of display crystel ic ......If not first check it then its the problem of uem................try and post result....Ok Br Muneeb Akhtar Raza