6700c keypad last solution - GSM-Forum

alkuzaee · 06-29-2010, 21:08

Nokia 6700c always work before opening it and after assembly it you find no key works unless power key and volume keys the final solution which tested with 2 devices 6700c is disconnect the cam connector and and test it if OK replace the cam connector because of it always broken when opening the mobile .
Best Regards.
Alkuzaee...

kelvinlim · 06-30-2010, 02:28

Wrong advise, this solution had been post and is well
written by nokia to inform the technician who work at the service center about the procedure and steps to prevent the cam flex module and the pcb from short circuit. When doing disassemble, remove of camera lens first before remove other parts is one way to ensure and prevent pcb from been short cos the metal clip which connect between the contact point of the camera lens and the flex, once a slight adjustment on the alingment, it will cost short circuit or due to left over solvent like glue which the factory didn't remove properly at the surface of the flex or water damage simply wipe off with alcohol

irfane74 · 10-25-2010, 14:10

just remove camera module and strip placed under the module and there you can see metal clip place paper on metal and assemble everything . tested 100% by me.

mobileland139 · 12-03-2010, 20:56

Quote:

Originally Posted by alkuzaee

Nokia 6700c always work before opening it and after assembly it you find no key works unless power key and volume keys the final solution which tested with 2 devices 6700c is disconnect the cam connector and and test it if OK replace the cam connector because of it always broken when opening the mobile .
Best Regards.
Alkuzaee...

good work it work for me thanks

khan sarfaraz · 12-11-2010, 09:04

it true if camera strip is short then key doesnt work

mobilagy · 04-20-2011, 01:36

works with me
many thanks for solution

gerard[virus] · 07-24-2011, 14:14

daghang salamat ahooooo
!!!!!!!!!!!!!!!!!!!!!!!!!! gerard!!!!!!!!!!!!!!!!!!

shindasinghvip · 09-28-2011, 12:50

Quote:

Nokia 6700c always work before opening it and after assembly it you find no key works unless power key and volume keys the final solution which tested with 2 devices 6700c is disconnect the cam connector and and test it if OK replace the cam connector because of it always broken when opening the mobile .
Best Regards.
Alkuzaee...

works with me
many thanks for solution

dulal044 · 11-05-2011, 08:32

nokia 6700c-1 when power on the phone it ok but the main key not working only
power key working

fairyland · 01-25-2012, 20:53

pleaeeeeeseeeeeeee help me
i was changing the housing of 6700c and after changing the ph is compltly dead? pc not detecting? i dont know what have i done wrong

06-29-2010, 21:08	#1 (permalink)
alkuzaee Junior Member Join Date: Jun 2006 Posts: 39 Member: 300261 Status: Offline Thanks Meter: 28	6700c keypad last solution Nokia 6700c always work before opening it and after assembly it you find no key works unless power key and volume keys the final solution which tested with 2 devices 6700c is disconnect the cam connector and and test it if OK replace the cam connector because of it always broken when opening the mobile . Best Regards. Alkuzaee...

10-25-2010, 14:10	#3 (permalink)
irfane74 Junior Member Join Date: Jan 2006 Location: Kharian Posts: 32 Member: 227355 Status: Offline Thanks Meter: 15	6700c keypad solution 100% tested just remove camera module and strip placed under the module and there you can see metal clip place paper on metal and assemble everything . tested 100% by me.

12-11-2010, 09:04	#5 (permalink)
khan sarfaraz Junior Member Join Date: Oct 2007 Location: india Posts: 15 Member: 615719 Status: Offline Thanks Meter: 0	6700c key sollution by aikuzaee it true if camera strip is short then key doesnt work

01-25-2012, 20:53	#10 (permalink)
fairyland Insane Poster Join Date: Apr 2008 Location: london Posts: 91 Member: 745365 Status: Offline Thanks Meter: 13	6700c no power on after changing housing pleaeeeeeseeeeeeee help me i was changing the housing of 6700c and after changing the ph is compltly dead? pc not detecting? i dont know what have i done wrong

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know solution	Robi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-10-2014 12:35
Solution for GSM phones!?!?!?!?	todosije	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	12-16-2010 05:52
Pic Solution	jan	Nokia Hardware & Hardware Repair	8	10-11-2010 10:56
5110 version 5.24 solution	lampin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-14-1999 07:00
!!!!!!TO ALL NOKIA 51XX/61XX SP LOCKS 1,2,3,4 SOLUTION latest news!!!!!	spterminator	Main Sales Section	2	08-13-1999 05:55

06-30-2010, 02:28	#2 (permalink)
kelvinlim Freak Poster Join Date: Jul 2003 Posts: 355 Member: 36010 Status: Offline Thanks Meter: 42	Wrong advise, this solution had been post and is well written by nokia to inform the technician who work at the service center about the procedure and steps to prevent the cam flex module and the pcb from short circuit. When doing disassemble, remove of camera lens first before remove other parts is one way to ensure and prevent pcb from been short cos the metal clip which connect between the contact point of the camera lens and the flex, once a slight adjustment on the alingment, it will cost short circuit or due to left over solvent like glue which the factory didn't remove properly at the surface of the flex or water damage simply wipe off with alcohol

04-20-2011, 01:36	#6 (permalink)
mobilagy No Life Poster Join Date: Jan 2006 Location: EGYPT Age: 47 Posts: 777 Member: 217479 Status: Offline Thanks Meter: 267	works with me many thanks for solution

07-24-2011, 14:14	#7 (permalink)
gerard[virus] Junior Member Join Date: Mar 2010 Location: manila Age: 34 Posts: 11 Member: 1269707 Status: Offline Sonork: gerard[virus] Thanks Meter: 0	daghang salamat ahooooo !!!!!!!!!!!!!!!!!!!!!!!!!! gerard!!!!!!!!!!!!!!!!!!

11-05-2011, 08:32	#9 (permalink)
dulal044 Freak Poster Join Date: Sep 2008 Location: MOULVIBAZAR. SYLHET,BANGLADESH Posts: 148 Member: 869128 Status: Offline Thanks Meter: 60	nokia 6700c-1 when power on the phone it ok but the main key not working only power key working