7250i dead but charging ok - GSM-Forum

trafix · 10-06-2004, 11:06

I have a 7250i 3 days used, it was returned dead, flashed with twister ok but still will not power on, i tried to connect the charger and the phone charges but still won't power on...

any suggestions?

eko · 10-06-2004, 11:20

Have you checked the switch?

Engineer · 10-06-2004, 15:55

Check / change power switch, cos when you flashed it, it'll automatically power up.

[email protected]

jakoy · 10-07-2004, 05:00

try to flash it with griffin

trafix · 10-07-2004, 05:05

i already did all of the above still the same, griffin doesn't finish flashing the phone..

eko · 10-07-2004, 10:58

Quote:

Originally Posted by trafix

i already did all of the above still the same, griffin doesn't finish flashing the phone..

What error message are you getting in griffin?

hitibiti · 10-08-2004, 18:58

use griffin and write eraze files

trafix · 10-09-2004, 04:41

griiffin error is, "flashing failed, do you want to retry operation..."

i have changed uem and now it powers onbut is in "contact service"
tried to download it to 7250 but just shows "blank screen" then powers off..

Bypx · 10-09-2004, 10:04

You can't downgrade @ 7250 and you can't change uem without write imei!

vladutstoian · 10-09-2004, 12:16

you mast rebuild imei

Steven_Hong · 10-09-2004, 12:22

After u downgrade 7250i (ver.4.63) to any version,then ur phone can't be 7250i anymore.After flashing to 7250 the Lcd show blue screen that's mean u got to change another LCD..But the old one still can use for other phone..Hope this can help u...

Steven_Hong · 10-09-2004, 12:24

flashing to 7250i again if it show contact service then u must flash it to 7250..

StudioGSM · 10-09-2004, 13:51

Contect me. I help you. This is very simple solution

Balkanjia · 10-21-2004, 10:20

I don´t know why but i have 7250i i have just downgraded it to 7250 and the LCD goes perfectly

i thing the LCD is the same

10-06-2004, 11:06	#1 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	7250i dead but charging ok I have a 7250i 3 days used, it was returned dead, flashed with twister ok but still will not power on, i tried to connect the charger and the phone charges but still won't power on... any suggestions?

10-09-2004, 12:16	#10 (permalink)
vladutstoian Crazy Poster Join Date: Feb 2004 Age: 39 Posts: 58 Member: 53969 Status: Offline Thanks Meter: 2	you mast rebuild imei Last edited by vladutstoian; 10-09-2004 at 12:27.

10-09-2004, 12:22	#11 (permalink)
Steven_Hong Insane Poster Join Date: Aug 2004 Age: 40 Posts: 78 Member: 78298 Status: Offline Thanks Meter: 6	7250i--->7250 After u downgrade 7250i (ver.4.63) to any version,then ur phone can't be 7250i anymore.After flashing to 7250 the Lcd show blue screen that's mean u got to change another LCD..But the old one still can use for other phone..Hope this can help u...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3230 dead but charging ok....	c_ahmad79	Nokia Hardware & Hardware Repair	8	07-27-2006 06:04
6510 dead, but charging works ok	MaRiN	Nokia Hardware & Hardware Repair	2	09-16-2004 15:49
Gd92 Dead But Charging Ok!!!!!!!!!!!	micmac	Hardware Repair by brands	7	05-05-2003 03:46
dead 8310 but charges ok	wildwhacker	Nokia Hardware & Hardware Repair	5	04-27-2003 17:59
Gd92 Dead But Charging Ok!!!!!!!!!!!	micmac	Panasonic	4	07-08-2002 15:04

10-06-2004, 11:20	#2 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	Have you checked the switch?

10-06-2004, 15:55	#3 (permalink)
Engineer Freak Poster Join Date: Nov 2003 Posts: 325 Member: 44658 Status: Offline Thanks Meter: 0	Check / change power switch, cos when you flashed it, it'll automatically power up. [email protected]

10-07-2004, 05:00	#4 (permalink)
jakoy No Life Poster Join Date: Aug 2002 Location: Island Garden City Of Samal,Ph Posts: 1,971 Member: 14852 Status: Offline Sonork: 100.1608716 Thanks Meter: 503	try to flash it with griffin

10-07-2004, 05:05	#5 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	i already did all of the above still the same, griffin doesn't finish flashing the phone..

10-08-2004, 18:58	#7 (permalink)
hitibiti No Life Poster Join Date: Mar 2003 Location: Canada Age: 44 Posts: 8,146 Member: 24023 Status: Offline Sonork: 100.61317 Thanks Meter: 2,630	use griffin and write eraze files

10-09-2004, 04:41	#8 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	griiffin error is, "flashing failed, do you want to retry operation..." i have changed uem and now it powers onbut is in "contact service" tried to download it to 7250 but just shows "blank screen" then powers off..

10-09-2004, 10:04	#9 (permalink)
Bypx No Life Poster Join Date: Apr 2004 Location: Milano, Italy Age: 37 Posts: 2,170 Member: 62336 Status: Offline Thanks Meter: 115	You can't downgrade @ 7250 and you can't change uem without write imei!

10-09-2004, 12:24	#12 (permalink)
Steven_Hong Insane Poster Join Date: Aug 2004 Age: 40 Posts: 78 Member: 78298 Status: Offline Thanks Meter: 6	flashing to 7250i again if it show contact service then u must flash it to 7250..

10-09-2004, 13:51	#13 (permalink)
StudioGSM Freak Poster Join Date: Aug 2002 Location: Poland Age: 44 Posts: 303 Member: 15122 Status: Offline Thanks Meter: 18	Contect me. I help you. This is very simple solution

10-21-2004, 10:20	#14 (permalink)
Balkanjia Freak Poster Join Date: Jul 2004 Age: 44 Posts: 119 Member: 75448 Status: Offline Thanks Meter: 0	I don´t know why but i have 7250i i have just downgraded it to 7250 and the LCD goes perfectly i thing the LCD is the same