7610 1st boot ok - GSM-Forum

ansari123 · 10-06-2007, 12:53

SALAM
i have 7610 water demage

7610 1st boot ok
but no erase FLASH plz help me abut this

ZChaker · 10-06-2007, 13:09

try to do the simple procedure
clean and rehot the board to elilinate water efferct
and then try to flash it
as simple as that and as short as life

ansari123 · 10-06-2007, 13:30

Quote:

Originally Posted by ZChaker

try to do the simple procedure
clean and rehot the board to elilinate water efferct
and then try to flash it
as simple as that and as short as life

I DO IT BUT PROBLEM IS SAME STIL ???????????

.::ricky rayya::. · 10-06-2007, 13:55

rehot cpu if same flash ic 100% check by me

Cecko · 10-06-2007, 13:59

remove flash, reball it and clean pcb...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E50 1st boot ok 1st boot error	rajtelecom	HWK	0	09-19-2008 12:05
nokia 3310 1st Boot Ok, 1st Boot Err: 00 00	subhadara	Nokia Hardware & Hardware Repair	3	02-27-2007 18:15
nokia 3310 1st Boot Ok, 1st Boot Err: 00 00	subhadara	Nokia Hardware & Hardware Repair	3	02-27-2007 08:54
6600 1st boot ok 2nd boot error??	recepoz	Nokia Hardware & Hardware Repair	23	08-30-2006 16:58
3310 1st boot ok 1st boot err	murtaza_nns	Nokia Hardware & Hardware Repair	11	06-22-2006 11:47

10-06-2007, 13:09	#2 (permalink)
ZChaker Freak Poster Join Date: Sep 2007 Posts: 128 Member: 592753 Status: Offline Thanks Meter: 11	try to do the simple procedure clean and rehot the board to elilinate water efferct and then try to flash it as simple as that and as short as life

10-06-2007, 13:55	#4 (permalink)
.::ricky rayya::. Freak Poster Join Date: Apr 2006 Location: india Posts: 415 Member: 254397 Status: Offline Thanks Meter: 224	rehot cpu if same flash ic 100% check by me

10-06-2007, 13:59	#5 (permalink)
Cecko Insane Poster Join Date: Sep 2006 Age: 36 Posts: 77 Member: 359219 Status: Offline Thanks Meter: 1	remove flash, reball it and clean pcb...