7610 auto restart.... - GSM-Forum

desmond2727 · 03-19-2006, 08:52

hi all
i have problem for my 7610 when i on it set work well but after 20sec set will auto restart

i was do erase then flashing alr still get same problem!!!
got any idae

thanks fisrt

mecky2000 · 03-19-2006, 09:16

format manualy and reheat upp

regards

desmond2727 · 03-19-2006, 09:35

all solution i try alr still same....

faisi · 03-19-2006, 10:25

full flash it and ui setting and then format manually................

BR.
Faisal.
GSM Mobile Lab.

..::ArchitRaj::.. · 03-19-2006, 10:39

manualy format
call buton+3+* and switch on

bingo_888 · 03-19-2006, 12:57

hi,
if all software solutions don't work, try to reheat, reballs or replace UEM...

desmond2727 · 03-20-2006, 04:35

thanks for reply
this not sw problem

hardware problem who face this problem before

got solution to sovle it?
all BGA ic i alredy rehot but still get problem

wayne_icu · 03-20-2006, 07:22

change the K4M28 ram and all is well

shree59 · 03-20-2006, 07:58

most of the time i saw mmc created problems do;nt use mmc during ur cheaking ph and prblem is in upp

desmond2727 · 03-20-2006, 09:00

Quote:

Originally Posted by wayne_icu

change the K4M28 ram and all is well

i will try it then post result

desmond2727 · 03-20-2006, 15:16

@wayne_icu
i chg the K4M28 ram still get same problem

bestman · 03-20-2006, 17:28

Quote:

Originally Posted by desmond2727

hi all
i have problem for my 7610 when i on it set work well but after 20sec set will auto restart

i was do erase then flashing alr still get same problem!!!
got any idae

thanks fisrt

i hope yopu have not flash your Phone?, you should ask before application flashing on phone.
restarting or rebooting your phone is a problem assocated with battery.
plaese, try hard to check your phone battery. or try another battery on your phone , this application is very easy .

please, i am waiting for you .

bestman

s1emens · 03-20-2006, 18:38

Usually
UPP is responsible for restart, phone standby and then lcd goes white and then off, phone standby and then lcd goes white but still turned on

UEM is responsible for phone standby and then off.

this is only my opinion

br,
s1emens

sallu · 03-20-2006, 19:21

Its often bcoz of mmc. dont use it. if its ok then format mmc and install a good antivirus. I solved this problem twice in this way.

desmond2727 · 03-22-2006, 13:35

Quote:

Originally Posted by bestman

i hope yopu have not flash your Phone?, you should ask before application flashing on phone.
restarting or rebooting your phone is a problem assocated with battery.
plaese, try hard to check your phone battery. or try another battery on your phone , this application is very easy .

please, i am waiting for you .

bestman

all ur solution i try alr....

03-19-2006, 08:52	#1 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	7610 auto restart.... hi all i have problem for my 7610 when i on it set work well but after 20sec set will auto restart i was do erase then flashing alr still get same problem!!! got any idae thanks fisrt Last edited by desmond2727; 03-19-2006 at 09:20.

03-19-2006, 10:39	#5 (permalink)
..::ArchitRaj::.. No Life Poster Join Date: Sep 2005 Location: Uttaranchal Age: 35 Posts: 2,504 Member: 181696 Status: Offline Sonork: 100.107830 Thanks Meter: 5,406	manualy format call buton+3+* and switch on Last edited by ..::ArchitRaj::..; 03-14-2007 at 18:22.

03-20-2006, 07:22	#8 (permalink)
wayne_icu Freak Poster Join Date: May 2005 Age: 40 Posts: 122 Member: 144350 Status: Offline Thanks Meter: 3	7610 auto restars solution change the K4M28 ram and all is well

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 Auto charging	mobilemani	Nokia Digital Core Technology 4 ( DCT-4 )	5	01-17-2009 08:57
7610 auto dead after 1days	xxtcdthuanxx	Nokia Hardware & Hardware Repair	5	03-27-2007 18:23
7610 auto restart	Totul	Nokia Hardware & Hardware Repair	5	08-09-2006 06:31
7610 auto shutdown...	kapsoncool	Nokia Hardware & Hardware Repair	9	06-12-2006 14:03
a100 restart if sim inserted auto restart	BEEKUAN	Panasonic	22	02-01-2005 18:16

03-19-2006, 09:16	#2 (permalink)
mecky2000 Junior Member Join Date: Feb 2006 Location: earth Posts: 23 Member: 229792 Status: Offline Thanks Meter: 0	format manualy and reheat upp regards

03-19-2006, 09:35	#3 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	all solution i try alr still same....

03-19-2006, 10:25	#4 (permalink)
faisi Freak Poster Join Date: May 2005 Posts: 371 Member: 143322 Status: Offline Thanks Meter: 35	full flash it and ui setting and then format manually................ BR. Faisal. GSM Mobile Lab.

03-19-2006, 12:57	#6 (permalink)
bingo_888 Freak Poster Join Date: Feb 2006 Posts: 384 Member: 234955 Status: Offline Thanks Meter: 19	hi, if all software solutions don't work, try to reheat, reballs or replace UEM...

03-20-2006, 04:35	#7 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	thanks for reply this not sw problem hardware problem who face this problem before got solution to sovle it? all BGA ic i alredy rehot but still get problem

03-20-2006, 07:58	#9 (permalink)
shree59 Freak Poster Join Date: Sep 2004 Age: 43 Posts: 225 Member: 82711 Status: Offline Thanks Meter: 30	most of the time i saw mmc created problems do;nt use mmc during ur cheaking ph and prblem is in upp

03-20-2006, 15:16	#11 (permalink)
desmond2727 Freak Poster Join Date: Mar 2004 Age: 47 Posts: 388 Member: 58704 Status: Offline Sonork: 100.1618753 Thanks Meter: 43	@wayne_icu i chg the K4M28 ram still get same problem

03-20-2006, 18:38	#13 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	Usually UPP is responsible for restart, phone standby and then lcd goes white and then off, phone standby and then lcd goes white but still turned on UEM is responsible for phone standby and then off. this is only my opinion br, s1emens

03-20-2006, 19:21	#14 (permalink)
sallu No Life Poster Join Date: Jul 2004 Age: 46 Posts: 549 Member: 73797 Status: Offline Thanks Meter: 19	Its often bcoz of mmc. dont use it. if its ok then format mmc and install a good antivirus. I solved this problem twice in this way.