7610 contact retailer - GSM-Forum

cavi · 07-17-2008, 10:21

first it was blinking and i flashed with latest firmware. now it powers up and displays contact retailer. any ideas guys!!!

rock23 · 07-17-2008, 10:24

try manual format

*#3 +power button

cavi · 07-17-2008, 11:08

cant format, i've tried all that formatting, and it doesn't even work on ufs

westgold · 07-17-2008, 11:11

try to use erase flash but back up rpl first then full flash and write good pm.

prakash6464mh · 07-17-2008, 11:17

Quote:

Originally Posted by cavi

first it was blinking and i flashed with latest firmware. now it powers up and displays contact retailer. any ideas guys!!!

1st try to full erase then flash with update flash file and write the good pm then formate your phone
############### post your result #################

cavi · 07-17-2008, 11:52

it flashes but does not set defaults

Vijendra Saini · 07-17-2008, 12:28

1. Try To Format A Phone By Ufs. Or
2. Try To Format Manually {* + 3 + Green + On Off}
Then Unlock It 100% Problem Were Solved.

renz0982 · 07-17-2008, 12:32

1. erase flash
2. flash with higher version (chinese version)
3. format user area
4. write pm file
5. init sim locks..

if still contact retailer shows, you can do 3 fingers, (*, 3, call sign, power on)

it works for me i hope it work for you..good luck bro..

sanamsanam · 07-17-2008, 12:49

hi bro if not good with all solusion try this pls.this is my own sense.heat on small flash ic then formate (*, 3, call sign, power on) like this.i am sure you can solve this problem 99%%%%%%%%%%%%%.........good luck.

santhosh kerala · 07-17-2008, 18:04

format 2 time with ufs it will be ok 100%

echo*BRD · 07-17-2008, 20:19

1. full erase
2. flash with higher version
3. write good pm
4. init sim locks
5. format use area
it work n don't full factory default

ehsaan007 · 07-17-2008, 20:42

set full factory first and then format it ur problem will b solve with jaf

ismayil · 07-22-2008, 10:04

try manual format. if its not done, rehot ram(glass) ic. or else change it. it will work 100%.

That'sme · 07-22-2008, 10:26

Quote:

Originally Posted by cavi

first it was blinking and i flashed with latest firmware. now it powers up and displays contact retailer. any ideas guys!!!

Just check the set IMEI no. If ok then Just Format the set with any box.

07-17-2008, 10:21	#1 (permalink)
cavi Freak Poster Join Date: May 2008 Location: Uganda Posts: 313 Member: 774126 Status: Offline Sonork: 100.1645006 Thanks Meter: 42	7610 contact retailer first it was blinking and i flashed with latest firmware. now it powers up and displays contact retailer. any ideas guys!!!

07-17-2008, 18:04	#10 (permalink)
santhosh kerala Freak Poster Join Date: Jun 2006 Posts: 176 Member: 286908 Status: Offline Thanks Meter: 81	i have same problem regular format 2 time with ufs it will be ok 100%

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7610 Contact Retailler	reez	WD2 & APE (Symbian Phones)	5	03-23-2005 10:28
7610 contact retailer	--==Dixon==--	WD2 & APE (Symbian Phones)	11	02-27-2005 23:06
7610 contact retailer	shairanifo	UFS2 + UFS3-Tornadoflasher	5	02-16-2005 13:17
7610 contact retailer	--==Dixon==--	WD2 & APE (Symbian Phones)	15	11-07-2004 05:19
Help 7610 contact retailer	alif30	Griffin	2	07-14-2004 16:53

07-17-2008, 10:24	#2 (permalink)
rock23 Cheater -Don't Deal with him- Join Date: Jan 2008 Location: around the globe... Posts: 1,207 Member: 677681 Status: Offline Sonork: 100.1590886 Thanks Meter: 232	try manual format *#3 +power button

07-17-2008, 11:08	#3 (permalink)
cavi Freak Poster Join Date: May 2008 Location: Uganda Posts: 313 Member: 774126 Status: Offline Sonork: 100.1645006 Thanks Meter: 42	cant format, i've tried all that formatting, and it doesn't even work on ufs

07-17-2008, 11:11	#4 (permalink)
westgold No Life Poster Join Date: Mar 2008 Location: west coast PH Posts: 523 Member: 734668 Status: Offline Thanks Meter: 83	try to use erase flash but back up rpl first then full flash and write good pm.

07-17-2008, 11:52	#6 (permalink)
cavi Freak Poster Join Date: May 2008 Location: Uganda Posts: 313 Member: 774126 Status: Offline Sonork: 100.1645006 Thanks Meter: 42	it flashes but does not set defaults

07-17-2008, 12:28	#7 (permalink)
Vijendra Saini No Life Poster Join Date: Nov 2006 Location: Back after long time :-) Age: 40 Posts: 4,397 Member: 398557 Status: Offline Sonork: 100.1578489 Thanks Meter: 1,516	1. Try To Format A Phone By Ufs. Or 2. Try To Format Manually {* + 3 + Green + On Off} Then Unlock It 100% Problem Were Solved.

07-17-2008, 12:32	#8 (permalink)
renz0982 Insane Poster Join Date: Apr 2008 Location: Philippines Posts: 63 Member: 740892 Status: Offline Thanks Meter: 21	1. erase flash 2. flash with higher version (chinese version) 3. format user area 4. write pm file 5. init sim locks.. if still contact retailer shows, you can do 3 fingers, (*, 3, call sign, power on) it works for me i hope it work for you..good luck bro..

07-17-2008, 12:49	#9 (permalink)
sanamsanam Freak Poster Join Date: Apr 2008 Location: kerala Posts: 228 Member: 752048 Status: Offline Sonork: sanam Thanks Meter: 42	hi bro if not good with all solusion try this pls.this is my own sense.heat on small flash ic then formate (*, 3, call sign, power on) like this.i am sure you can solve this problem 99%%%%%%%%%%%%%.........good luck.

07-17-2008, 20:19	#11 (permalink)
echoBRD Insane Poster Join Date: Mar 2008 Location: SANGGAU UNDERGROUND Posts: 81 Member: 736655 Status: Offline* Thanks Meter: 123	1. full erase 2. flash with higher version 3. write good pm 4. init sim locks 5. format use area it work n don't full factory default

07-17-2008, 20:42	#12 (permalink)
ehsaan007 Junior Member Join Date: Jun 2007 Location: Pakistan Posts: 23 Member: 536811 Status: Offline Thanks Meter: 1	set full factory first and then format it ur problem will b solve with jaf

07-22-2008, 10:04	#13 (permalink)
ismayil Freak Poster Join Date: Apr 2006 Location: dubai Posts: 183 Member: 254941 Status: Offline Thanks Meter: 24	try manual format. if its not done, rehot ram(glass) ic. or else change it. it will work 100%.