8210 contact service - GSM-Forum

mas comm · 09-25-2005, 15:38

any solution for 8210 contact service, i flash it with knock, after 68% flash it gives error and gone into contact service, i try to use other softwarez, but they didnt revive it,???

viks · 09-26-2005, 07:15

take info and tell us the results

arkogsm · 09-26-2005, 10:38

Flash this by rolis 4.78 or 4.79. full flash mcu+ppm and eeprom too.
Battery have to be full!!!!!!!!!!! Good luck

zilha77 · 10-21-2005, 15:28

First see with Wintesla if it is hardware c.s.

hpcom · 10-25-2005, 03:08

reball flash ic n try flash again or change d the flash ic...good luck

muzaffar nawaz · 10-30-2005, 09:03

i have tried first i reflow the cobba then change the same now there is a black screen is showing which i know it is contact service if anybody know the solution i will be very thankful

muzaffar

aria_mobile · 11-28-2005, 20:40

if u flash it completly but you dont take answer just remove (coba ic) it is will be ok
good luck

nolyboy · 11-30-2005, 03:39

Quote:

Originally Posted by aria_mobile

if u flash it completly but you dont take answer just remove (coba ic) it is will be ok
good luck

remove??? do you mean replace???

N.I.T · 11-30-2005, 11:13

Quote:

Originally Posted by mas comm

any solution for 8210 contact service, i flash it with knock, after 68% flash it gives error and gone into contact service, i try to use other softwarez, but they didnt revive it,???

ONLY CHANGE COBBA I.C

09-25-2005, 15:38	#1 (permalink)
mas comm No Life Poster Join Date: Jul 2004 Location: P A K I S T A N Age: 49 Posts: 507 Member: 75644 Status: Offline Thanks Meter: 5	8210 contact service any solution for 8210 contact service, i flash it with knock, after 68% flash it gives error and gone into contact service, i try to use other softwarez, but they didnt revive it,???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8210 CONTACT SERVICE SOLUTION	Hams	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-24-2001 17:27
8210 Contact Service	surfer2go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	05-30-2001 00:18
8210 Contact service problem after full flashing	simbirley	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	05-15-2001 13:45
Nokia 8210 Contact service	Henry	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-15-2001 05:06
8210 - Contact Service ?!	Liquid	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-03-2000 12:05

09-26-2005, 07:15	#2 (permalink)
viks Freak Poster Join Date: Aug 2005 Age: 46 Posts: 207 Member: 168352 Status: Offline Thanks Meter: 18	take info and tell us the results

09-26-2005, 10:38	#3 (permalink)
arkogsm Crazy Poster Join Date: Jan 2005 Age: 44 Posts: 51 Member: 108612 Status: Offline Thanks Meter: 0	Flash this by rolis 4.78 or 4.79. full flash mcu+ppm and eeprom too. Battery have to be full!!!!!!!!!!! Good luck

10-21-2005, 15:28	#4 (permalink)
zilha77 Junior Member Join Date: Jan 2002 Location: world Posts: 30 Member: 8952 Status: Offline Thanks Meter: 0	First see with Wintesla if it is hardware c.s.

10-25-2005, 03:08	#5 (permalink)
hpcom Crazy Poster Join Date: Sep 2005 Age: 44 Posts: 56 Member: 183379 Status: Offline Thanks Meter: 10	reball flash ic n try flash again or change d the flash ic...good luck

10-30-2005, 09:03	#6 (permalink)
muzaffar nawaz Major Poster Join Date: Apr 2003 Posts: 41 Member: 26511 Status: Offline Thanks Meter: 4	i have tried first i reflow the cobba then change the same now there is a black screen is showing which i know it is contact service if anybody know the solution i will be very thankful muzaffar

11-28-2005, 20:40	#7 (permalink)
aria_mobile Crazy Poster Join Date: Jun 2003 Location: Iran,Tehran Age: 48 Posts: 56 Member: 31869 Status: Offline Thanks Meter: 2	if u flash it completly but you dont take answer just remove (coba ic) it is will be ok good luck