3310 no power - GSM-Forum

deepx · 04-15-2004, 20:02

Hi all,

Can't power up nk3310. I rehot ccont, replace G502, B200 and Hagar. Power button is ok. Flashing ok, don't charging.

br,
Deepx

uwenk98 · 04-30-2004, 12:06

Yess I have same problem Please Help..................

renejeic · 04-30-2004, 12:28

try to replace ccont and cobba

megone · 04-30-2004, 12:39

replace ccont.....................

)

uwenk98 · 04-30-2004, 18:46

I use same IC ccont and cobba to the others phone work normal

luckystar · 05-01-2004, 08:10

i think it is not the problem of ccont because he flashed it..if there is problem for cocnt how he can flash..so try by changing flash,it might be due to flash complaint

kojote · 05-01-2004, 09:26

Write fubu then read,open in hex editor and compare>If not same then flash ic is bad,if same try to change RAM.
WBR
dean

amal · 05-02-2004, 10:32

Quote:

Originally Posted by deepx

Hi all,

Can't power up nk3310. I rehot ccont, replace G502, B200 and Hagar. Power button is ok. Flashing ok, don't charging.

br,
Deepx

If u r able 2 flash it means pwr supply line is ok.So only problem lies with flash ic .Change the flash ic &Do a flash.

amal · 05-02-2004, 10:55

Quote:

Originally Posted by deepx

Hi all,

Can't power up nk3310. I rehot ccont, replace G502, B200 and Hagar. Power button is ok. Flashing ok, don't charging.

br,
Deepx

I faced the same problem once.And the problem was in the PA.It had become short.And set was not on.When the PA was removed the set became ok.But the problem I face now is When I changed it with a new 1 the PA got short again.Any help from learned members.

afaisal · 05-02-2004, 11:51

Hy deepx

I think you use the eeprom tool, read new double eeprom with ok phone and write on your faulty phone may be phone goes to ON other wise you change or rehot the RAM IC. May be possible fash hardware faulty.

04-15-2004, 20:02	#1 (permalink)
deepx Freak Poster Join Date: Jul 2002 Posts: 128 Member: 13696 Status: Offline Thanks Meter: 0	3310 no power Hi all, Can't power up nk3310. I rehot ccont, replace G502, B200 and Hagar. Power button is ok. Flashing ok, don't charging. br, Deepx

04-30-2004, 12:39	#4 (permalink)
megone No Life Poster Join Date: Jun 2003 Location: Lichtenstain Age: 47 Posts: 1,184 Member: 31594 Status: Offline Thanks Meter: 13	replace ccont.....................)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 no power and no charging	haller	Nokia Hardware & Hardware Repair	4	07-11-2005 14:43
3310 no power after flash	conac	Nokia Hardware & Hardware Repair	4	03-31-2005 20:44
3310 no power after liquid damage	ash1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	09-12-2004 13:52
3310 no power	iliescu_l	Nokia Hardware & Hardware Repair	1	10-10-2002 16:51
3310 no power	flash	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	09-13-2002 15:11

04-30-2004, 12:06	#2 (permalink)
uwenk98 No Life Poster Join Date: Oct 2002 Location: gold land Age: 46 Posts: 564 Member: 16904 Status: Offline Thanks Meter: 9	Yess I have same problem Please Help..................

04-30-2004, 12:28	#3 (permalink)
renejeic Freak Poster Join Date: Feb 2004 Location: Paradise On Earth Posts: 109 Member: 53684 Status: Offline Thanks Meter: 11	try to replace ccont and cobba

04-30-2004, 18:46	#5 (permalink)
uwenk98 No Life Poster Join Date: Oct 2002 Location: gold land Age: 46 Posts: 564 Member: 16904 Status: Offline Thanks Meter: 9	I use same IC ccont and cobba to the others phone work normal

05-01-2004, 08:10	#6 (permalink)
luckystar Junior Member Join Date: Mar 2004 Age: 43 Posts: 4 Member: 59064 Status: Offline Thanks Meter: 0	i think it is not the problem of ccont because he flashed it..if there is problem for cocnt how he can flash..so try by changing flash,it might be due to flash complaint

05-01-2004, 09:26	#7 (permalink)
kojote Freak Poster Join Date: Jul 2003 Location: RS;Bosnia&Herzegovina Age: 50 Posts: 394 Member: 33472 Status: Offline Thanks Meter: 17	Write fubu then read,open in hex editor and compare>If not same then flash ic is bad,if same try to change RAM. WBR dean

05-02-2004, 11:51	#10 (permalink)
afaisal Junior Member Join Date: Apr 2004 Location: PAKISTAN Age: 49 Posts: 5 Member: 63494 Status: Offline Thanks Meter: 0	Hy deepx I think you use the eeprom tool, read new double eeprom with ok phone and write on your faulty phone may be phone goes to ON other wise you change or rehot the RAM IC. May be possible fash hardware faulty.