8210 with no signal - GSM-Forum

Fasterbaby · 03-13-2003, 19:23

It gets no signal at all, manual search no good either, can someone tell me where the antenna switch is and any other faults it may be

nab · 03-13-2003, 21:52

PA, but do a search as this topic has been covered in GREAT DEPTH many times, and no offence, but i think people get fed up giving same reply to everyone. So you may not get manby answers until you've done all in the previous posts.

Fasterbaby · 03-13-2003, 23:51

Yes i know what you mean, but i am not sure how to replace the PA on an 8210, do i have to remove the "cover " as it stops the PA from being lifted, any advice would be much apreciated

amir-cairo · 03-14-2003, 04:26

what happin on self test ??
if u have a network but not access then check pa
if u haven`t then anttena swich or audio

Fasterbaby · 03-14-2003, 08:57

I left it turned on all night and when i went to it in the morning it had a full signal!! Then i turned it off and on again and now nothing? How do i replace the PA? Do i have to unsolder the RF cover first then replace the PA then resolder the cover? And can someone point out to me where the antenna switch is, and do i relace it or would reheating it possibly cure it? Thanks for your help

vule · 03-14-2003, 15:15

Hiya

PA does not have anything with RX...Check RX chain from antenna switch to cobba, but first try to recalibrate ur handset with wintesla...

BR

Vule

sivaprasad · 03-15-2003, 07:39

respected members,
where can i purchase videos for repairing like last 4 years back nokia 5110 video covers complete troubleshooting with spectrum analizer and multimeter with testing points waveforms like i required all phones videos for repairing tips videos where can i get this videos i forget china site pls any one help me

best regds

VELIKI · 03-15-2003, 07:47

where can i dw wintesla that work because my always hang

delta1 · 03-16-2003, 13:52

hi, you can download Wintesla cracked from WWW.GSMSCHWANTZ.com or full version but then you must have PKD-1 Dongle. run diagnostics and see what happens. perhaps COBBA faulty.

03-13-2003, 19:23	#1 (permalink)
Fasterbaby Insane Poster Join Date: Feb 2003 Posts: 83 Member: 21387 Status: Offline Thanks Meter: 0	8210 with no signal It gets no signal at all, manual search no good either, can someone tell me where the antenna switch is and any other faults it may be

03-15-2003, 07:39	#7 (permalink)
sivaprasad No Life Poster Join Date: Jun 2001 Age: 50 Posts: 602 Member: 4853 Status: Offline Thanks Meter: 9	pls help respected members, where can i purchase videos for repairing like last 4 years back nokia 5110 video covers complete troubleshooting with spectrum analizer and multimeter with testing points waveforms like i required all phones videos for repairing tips videos where can i get this videos i forget china site pls any one help me best regds

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
8210 sometimes no signal	Destructor	Nokia Hardware & Hardware Repair	13	11-01-2003 00:43
T18z with No Signal and No Access	ArMaGeDoN	Old Ericsson Phones & Sony Phones	0	10-29-2003 00:14
8210 with no signal	bello	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	07-13-2002 04:41
8210 but NO SIGNAL!	Bass_Mekanik	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	04-26-2002 23:36
5190 with no signal	vampire	Old Ericsson Phones & Sony Phones	1	06-26-2000 21:26

03-13-2003, 21:52	#2 (permalink)
nab No Life Poster Join Date: Apr 2001 Location: UK and PAKISTAN Posts: 643 Member: 4315 Status: Offline Thanks Meter: 1	PA, but do a search as this topic has been covered in GREAT DEPTH many times, and no offence, but i think people get fed up giving same reply to everyone. So you may not get manby answers until you've done all in the previous posts.

03-13-2003, 23:51	#3 (permalink)
Fasterbaby Insane Poster Join Date: Feb 2003 Posts: 83 Member: 21387 Status: Offline Thanks Meter: 0	Yes i know what you mean, but i am not sure how to replace the PA on an 8210, do i have to remove the "cover " as it stops the PA from being lifted, any advice would be much apreciated

03-14-2003, 04:26	#4 (permalink)
amir-cairo Freak Poster Join Date: May 2002 Location: egypt Age: 46 Posts: 238 Member: 11466 Status: Offline Thanks Meter: 0	what happin on self test ?? if u have a network but not access then check pa if u haven`t then anttena swich or audio

03-14-2003, 08:57	#5 (permalink)
Fasterbaby Insane Poster Join Date: Feb 2003 Posts: 83 Member: 21387 Status: Offline Thanks Meter: 0	I left it turned on all night and when i went to it in the morning it had a full signal!! Then i turned it off and on again and now nothing? How do i replace the PA? Do i have to unsolder the RF cover first then replace the PA then resolder the cover? And can someone point out to me where the antenna switch is, and do i relace it or would reheating it possibly cure it? Thanks for your help

03-14-2003, 15:15	#6 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Hiya PA does not have anything with RX...Check RX chain from antenna switch to cobba, but first try to recalibrate ur handset with wintesla... BR Vule

03-15-2003, 07:47	#8 (permalink)
VELIKI No Life Poster Join Date: Nov 2002 Location: slovenia Age: 48 Posts: 589 Member: 18028 Status: Offline Thanks Meter: 20	where can i dw wintesla that work because my always hang

03-16-2003, 13:52	#9 (permalink)
delta1 Insane Poster Join Date: Jul 2002 Location: portugal Age: 47 Posts: 60 Member: 14076 Status: Offline Thanks Meter: 1	hi, you can download Wintesla cracked from WWW.GSMSCHWANTZ.com or full version but then you must have PKD-1 Dongle. run diagnostics and see what happens. perhaps COBBA faulty.