5210 sticks with blank lcd - GSM-Forum

PhoneDoctor · 06-23-2004, 13:48

It turns on fine, LCD goes Black but then stays BLANK, no letters and you must take battery off.

arif_tual · 06-23-2004, 19:20

CPU problems most.
found n many old 8210 / 8250

leosedf · 06-24-2004, 10:39

try to clean the board and then reflow cpu and flash ic worked many times for me.
You may also flash the phone again

DeltaGSM · 06-24-2004, 18:31

Quote:

Originally Posted by ***********

It turns on fine, LCD goes Black but then stays BLANK, no letters and you must take battery off.

just update firmware, works 100%.

BR

Trion · 06-25-2004, 19:58

Its in "contact Service". That's why u can't switch it off. try flashing the phone.

Good luck

bestman · 06-26-2004, 04:40

replace your LCD of your phone ,before anything to do.
your lcd is not laying properly,if you try all application , i told you about ,there replace the lcd of your phone. ok

bestman.

leosedf · 06-26-2004, 07:18

It's not the lcd. Most of 5210 have this problem.

Trion · 06-26-2004, 16:42

Both leosedf and azampk are correct. Its a software problem and the phone needs to be flashed with a good flash file. That's all.

06-23-2004, 13:48	#1 (permalink)
PhoneDoctor Insane Poster Join Date: Sep 2003 Location: Greece Age: 68 Posts: 87 Member: 40230 Status: Offline Thanks Meter: 0	5210 sticks with blank lcd It turns on fine, LCD goes Black but then stays BLANK, no letters and you must take battery off.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I got blank LCD after try write flash with Itunes 8.01 any news how fix this ??	wgmmmx	iPhone 2 / iPhone 3G / iPhone 3GS	2	10-10-2008 21:32
6101 with blank LCD, but only some time...	microera	Nokia Digital Core Technology 4 ( DCT-4 )	0	10-12-2007 12:20
W550 + blank LCD + always pwr on with TP	piracik	SonyEricsson (USB-Smart)	0	07-02-2006 15:31
3589i Flashed with 3586i firmware it goes blank LCD	s1emens	Nokia CDMA	0	08-24-2005 20:34
8210 blank LCD with good LCD and new	uwenk98	Nokia Hardware & Hardware Repair	5	03-19-2004 23:01

06-23-2004, 19:20	#2 (permalink)
arif_tual Major Poster Join Date: Feb 2004 Age: 51 Posts: 49 Member: 51849 Status: Offline Thanks Meter: 2	CPU problems most. found n many old 8210 / 8250

06-24-2004, 10:39	#3 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	try to clean the board and then reflow cpu and flash ic worked many times for me. You may also flash the phone again

06-25-2004, 19:58	#5 (permalink)
Trion Freak Poster Join Date: Nov 2003 Posts: 370 Member: 44625 Status: Offline Thanks Meter: 36	Its in "contact Service". That's why u can't switch it off. try flashing the phone. Good luck

06-26-2004, 04:40	#6 (permalink)
bestman No Life Poster Join Date: Apr 2004 Age: 49 Posts: 1,271 Member: 61294 Status: Offline Thanks Meter: 49	replace your LCD of your phone ,before anything to do. your lcd is not laying properly,if you try all application , i told you about ,there replace the lcd of your phone. ok bestman.

06-26-2004, 07:18	#7 (permalink)
leosedf No Life Poster Join Date: Jul 2003 Location: Thessaloniki,Hellas Age: 44 Posts: 1,013 Member: 33547 Status: Offline Thanks Meter: 17	It's not the lcd. Most of 5210 have this problem.

06-26-2004, 16:42	#8 (permalink)
Trion Freak Poster Join Date: Nov 2003 Posts: 370 Member: 44625 Status: Offline Thanks Meter: 36	Both leosedf and azampk are correct. Its a software problem and the phone needs to be flashed with a good flash file. That's all.