9500 nokia only - GSM-Forum

singoix · 06-27-2008, 11:36

for the master, i have 9500 and the problem is, if battery inserted, just shown nokia... only nokia and the light cant die.. thanks before for helping me

regards

singoix

iqballk · 06-27-2008, 11:55

first, flash with a new firmware.. post result..

singoix · 06-27-2008, 12:05

i'd try to flash it using mtbox, used fbus+dku2 cable.. and "failed phone to boot"

torpedo_seluler · 06-27-2008, 12:22

Sir what do mean by Cannot boot?
fix the Fbus cable without DKU2 and press the OK/ERR button on top of the MT-BOX Menu.

Then Post the log here sir.

singoix · 06-27-2008, 12:32

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 0, Box Tx 1, Box Rx 0, Bsi 0
Boot...
DCT4
u_2nd.fia
u_amd.fia
ASIC ID: 2142
Configuration Info (9F):
Number of Flashes: 2
01000000: Amd, 0001 2A7E 0024 0111, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
UEM IMEI is: 35430600116260
============= Set FBus mode for info =============
VBat is 3.90V

Vpp pin has 1.28V, Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RA-2 ( 9500)
V 3.39.0/30-11-04/RA-2 (c) Nokia.
IMEI: 354306001162604

chandy pok · 06-27-2008, 16:02

Try this hardware then post result.See the blak pointer.

musa_bahi · 06-27-2008, 16:18

try to flash with new firmware
its must be ok

06-27-2008, 11:36	#1 (permalink)
singoix Junior Member Join Date: Sep 2005 Location: Bontang, Indonesia Posts: 22 Member: 183501 Status: Offline Thanks Meter: 1	9500 nokia only for the master, i have 9500 and the problem is, if battery inserted, just shown nokia... only nokia and the light cant die.. thanks before for helping me regards singoix

06-27-2008, 16:18	#7 (permalink)
musa_bahi No Life Poster Join Date: May 2007 Location: pakistan Age: 35 Posts: 502 Member: 505752 Status: Offline Sonork: 1611502:zubair Thanks Meter: 33	n95 hang try to flash with new firmware its must be ok

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
9500 nokia only	jolie	Nokia Hardware & Hardware Repair	9	06-09-2010 06:50
Nokia 9500 Shows Nokia Only Then White Screen	MARCO_LEI24	Nokia Digital Core Technology 4 ( DCT-4 )	2	08-15-2007 03:46
9500 DISPLAY only nokia	joegel	Nokia Hardware & Hardware Repair	7	10-05-2006 18:22

06-27-2008, 11:55	#2 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 411	first, flash with a new firmware.. post result..

06-27-2008, 12:05	#3 (permalink)
singoix Junior Member Join Date: Sep 2005 Location: Bontang, Indonesia Posts: 22 Member: 183501 Status: Offline Thanks Meter: 1	i'd try to flash it using mtbox, used fbus+dku2 cable.. and "failed phone to boot"

06-27-2008, 12:22	#4 (permalink)
torpedo_seluler Freak Poster Join Date: Oct 2006 Location: Indonesia Posts: 423 Member: 368629 Status: Offline Thanks Meter: 87	Sir what do mean by Cannot boot? fix the Fbus cable without DKU2 and press the OK/ERR button on top of the MT-BOX Menu. Then Post the log here sir.

06-27-2008, 12:32	#5 (permalink)
singoix Junior Member Join Date: Sep 2005 Location: Bontang, Indonesia Posts: 22 Member: 183501 Status: Offline Thanks Meter: 1	Vpp pin has 0.09V, Not Connected Pins: Mbus 0, Box Tx 1, Box Rx 0, Bsi 0 Boot... DCT4 u_2nd.fia u_amd.fia ASIC ID: 2142 Configuration Info (9F): Number of Flashes: 2 01000000: Amd, 0001 2A7E 0024 0111, 10 02000000: NotUsed, 0000 0001 0000 0000, 0 ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 UEM IMEI is: 35430600116260 ============= Set FBus mode for info ============= VBat is 3.90V Vpp pin has 1.28V, Connected Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Phone is in: Local mode Model: RA-2 ( 9500) V 3.39.0/30-11-04/RA-2 (c) Nokia. IMEI: 354306001162604