again,6600 white screen - GSM-Forum

.::AkhavanGSM::. · 09-14-2006, 10:35

I have many 6600 phones with white screen and shotdown on 30 seconds and can be flashed completely.I changed upp and no changes!
is it UEM fault or flash chips fault?or IMEI problem?
If ir is IMEI how to rebuild IMEI when phones is almost off (white screen)

GSM_BLUE · 10-01-2006, 12:24

just try to detache all memories....clean your PCB...again put back all memories again.proven 99%.post result..

akkaamgopi · 10-01-2006, 20:56

Quote:

Originally Posted by GSM_BLUE

just try to detache all memories....clean your PCB...again put back all memories again.proven 99%.post result..

br
use full erase file then full flash with latest vr

dareevil · 10-01-2006, 22:19

Try to format user area...

abdulrahman · 10-01-2006, 22:44

Hi GSMLIGHT,
1) try to do manual format
2)erase flash then full flash with latest version full factory etc. then format user area and check
3)check imei corropted if corropted then put rpl file
4) check display connector all pins are ok or need to resolder or need to replace display connector,
5)reflow display ic or change it
6)reball flash ic or replace it

Regards
abdulrahman

ahmedasmet · 10-01-2006, 23:56

good work
abdulrahman

.::AkhavanGSM::. · 10-03-2006, 11:24

Quote:

Originally Posted by abdulrahman

Hi GSMLIGHT,
1) try to do manual format
2)erase flash then full flash with latest version full factory etc. then format user area and check
3)check imei corropted if corropted then put rpl file
4) check display connector all pins are ok or need to resolder or need to replace display connector,
5)reflow display ic or change it
6)reball flash ic or replace it

Regards
abdulrahman

For all you think this is a software or LCD problem.please dont waste my or your own time!
1.I wrote I change UPP, do you think I am such a silly that changes UPP before try software????
2.The phone is not really ON,then no format,no UI settings no Imei reading and no many other things.PLEASE before post answer read the question itself!
3.LCD problem mean phone works calls,rings,.... just no LCD,but in this case phone is not acyually on.
GSM_blue i will try it .
PLEASE PLEASE PLEASE,READ QUESTION THEN ANSWER!THIS IS 100% HARDWARE PROBLEM AND PHONE IS JAMMED

baraka42 · 10-03-2006, 15:52

@ GSMLight,

you wrote here.

1:I have many 6600 phones with white screen and shotdown on 30 seconds and can be flashed completely.I changed upp and no changes

ans. 1: you are senior members here, and have idea abt after 30 second power of mean there is possible fault may UEM [ watch dog enable ? ]

2:is it UEM fault or flash chips fault?or IMEI problem?
If ir is IMEI how to rebuild IMEI when phones is almost off (white screen)

ans 2: sorry for mix 2 line. say as abdurahman > 3)check imei corropted if corropted then put rpl file

and i think abdulrahman have reply here only as general solution for white light. that may help to all .

and again see no. 3] is releted to your question also.

still you think that ALL THEY REPLY HERE IS WEST YOUR TIME. THEN HOW CANE YOU DECIDE FOR YOUR PROBLEM THAT WHAT REPLY IS OK OR NOT.WITHOUT READING.THEM ?

HOW CAN GSM-Forum Statistics IS TODAY :Threads: 318,367, Posts: 1,917,656, Members: 362,606

SORRY FOR ANY MISTAKE.

dareevil · 10-03-2006, 15:52

Well.. well...

Bro GSMLight, everybody here tried to give some advices, accepted or not is your own decision.. we've tried to help. And you said your phone with white screen and shutdown on 30 seconds. You changed UPP and no changes -> means you changed UPP and your phone is still white screen and shutdown on 30 seconds. I think this was you meant by "NO CHANGES".

And now your phone is not really ON and totally jammed, WHO KNOWS?? You do, and you never tell us, just said NO CHANGES.. You changed UPP once, as you thought UPP was the problem and you are not silly, and I think you're expert enough in repairing mobile phones, why didn't you replace one more UPP?? Maybe your UPP chip was bad.

So try it yourself, no need to post if you don't need others' advices.

rgds,

dareevil · 10-03-2006, 15:54

baraka42... agree.. good statement..

cheers,

shoeb7 · 10-03-2006, 16:13

bakara42.... is right .
regards

ekel · 10-03-2006, 22:51

Quote:

Originally Posted by GSMLight

For all you think this is a software or LCD problem.please dont waste my or your own time!
1.I wrote I change UPP, do you think I am such a silly that changes UPP before try software????
2.The phone is not really ON,then no format,no UI settings no Imei reading and no many other things.PLEASE before post answer read the question itself!
3.LCD problem mean phone works calls,rings,.... just no LCD,but in this case phone is not acyually on.
GSM_blue i will try it .
PLEASE PLEASE PLEASE,READ QUESTION THEN ANSWER!THIS IS 100% HARDWARE PROBLEM AND PHONE IS JAMMED

hy mate, cek uem base power first...

after that, chek control vcore power on n230. if i`m not wrong

dareevil · 10-04-2006, 02:54

Ekel,

If you're wrong, you're wasting time.. hehehee... just kidding bro..

.::AkhavanGSM::. · 10-04-2006, 07:48

here is some thing wrong.I never said wrong answer is wasting time!
"with white screen and shotdown on 30 seconds "
If some one really read this before answering will never answer "FORMAT PHONE"
I have repiled many thread and may some right and some wrong.also I received many replies,wrong or right.It is natural.
Problem is this that some ppl want to help but they post answer before reading question.if phone shutdown in 30Sec then
HOW to "1) try to do manual format"
Or why to "2check display connector all pins are ok or need to resolder or need to replace display connector

abdurahman is a good friend and his answer was common answer for 6600 problems.BUT as I wrote in my answer before problem is . wrong repiles are welcome (IF you read my question first!!!)

dareevil · 10-04-2006, 12:17

GSMLight,

I am sure everyone who tried to help with any answer here, had read your post/problem first. But we're from around the world, with their own languages. So if miscommunication happened here, it's very normal. Sometimes ppl here catch the wrong meaning, and we have to understand..

My english is not good too, I just studied english language at school and college. If I did mistake, hopefully everyone here may understand.

If you think somebody's answer is wrong, no need to say that it was wasting time. These words could hurt other's feelings. How if this what happened on you? You try to help with your reply, but the one who posts the question reply you that you're wasting his time and your own time and he is not too silly not to do the step you tell him first, HOW DO YOU FEEL? It's hurt, right??

Anyway, just forget it. And I hope you will find out a good solution for your problem, and then don't forget to share with us.

Good luck, GSMLight...

09-14-2006, 10:35	#1 (permalink)
.::AkhavanGSM::. No Life Poster Join Date: Jun 2002 Location: Iran Age: 47 Posts: 1,082 Member: 12724 Status: Offline Thanks Meter: 30	again,6600 white screen I have many 6600 phones with white screen and shotdown on 30 seconds and can be flashed completely.I changed upp and no changes! is it UEM fault or flash chips fault?or IMEI problem? If ir is IMEI how to rebuild IMEI when phones is almost off (white screen)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help need 6600 white screen,contact retailer i read all the post on forum...HELP	ZetMen	Nokia Hardware & Hardware Repair	16	08-30-2005 09:32
my 6600 white screen.. helllp	Tbaba	WD2 & APE (Symbian Phones)	11	04-01-2005 18:38
6600 white screen after tornado flash	ckkckk	WD2 & APE (Symbian Phones)	1	03-25-2005 14:30
6600 white screen	-KimoAlex-	WD2 & APE (Symbian Phones)	3	03-19-2005 23:57
6600 white screen!	sergioems	Sell ur Old and Used Stuff	0	12-05-2004 14:31

10-01-2006, 12:24	#2 (permalink)
GSM_BLUE No Life Poster Join Date: Sep 2006 Age: 41 Posts: 857 Member: 356202 Status: Offline Thanks Meter: 46	just try to detache all memories....clean your PCB...again put back all memories again.proven 99%.post result..

10-01-2006, 22:19	#4 (permalink)
dareevil Freak Poster Join Date: Mar 2004 Age: 47 Posts: 136 Member: 57502 Status: Offline Thanks Meter: 2	Try to format user area...

10-01-2006, 22:44	#5 (permalink)
abdulrahman Freak Poster Join Date: Dec 2005 Location: UEM Posts: 116 Member: 207453 Status: Offline Thanks Meter: 14	Hi GSMLIGHT, 1) try to do manual format 2)erase flash then full flash with latest version full factory etc. then format user area and check 3)check imei corropted if corropted then put rpl file 4) check display connector all pins are ok or need to resolder or need to replace display connector, 5)reflow display ic or change it 6)reball flash ic or replace it Regards abdulrahman

10-01-2006, 23:56	#6 (permalink)
ahmedasmet Insane Poster Join Date: Oct 2006 Location: --EGYPT-- Posts: 73 Member: 361662 Status: Offline Thanks Meter: 11	good work abdulrahman

10-03-2006, 15:52	#8 (permalink)
baraka42 No Life Poster Join Date: Aug 2002 Location: india Age: 63 Posts: 1,476 Member: 14578 Status: Offline Thanks Meter: 831	@ GSMLight, you wrote here. 1:I have many 6600 phones with white screen and shotdown on 30 seconds and can be flashed completely.I changed upp and no changes ans. 1: you are senior members here, and have idea abt after 30 second power of mean there is possible fault may UEM [ watch dog enable ? ] 2:is it UEM fault or flash chips fault?or IMEI problem? If ir is IMEI how to rebuild IMEI when phones is almost off (white screen) ans 2: sorry for mix 2 line. say as abdurahman > 3)check imei corropted if corropted then put rpl file and i think abdulrahman have reply here only as general solution for white light. that may help to all . and again see no. 3] is releted to your question also. still you think that ALL THEY REPLY HERE IS WEST YOUR TIME. THEN HOW CANE YOU DECIDE FOR YOUR PROBLEM THAT WHAT REPLY IS OK OR NOT.WITHOUT READING.THEM ? HOW CAN GSM-Forum Statistics IS TODAY :Threads: 318,367, Posts: 1,917,656, Members: 362,606 SORRY FOR ANY MISTAKE.

10-03-2006, 15:52	#9 (permalink)
dareevil Freak Poster Join Date: Mar 2004 Age: 47 Posts: 136 Member: 57502 Status: Offline Thanks Meter: 2	Well.. well... Bro GSMLight, everybody here tried to give some advices, accepted or not is your own decision.. we've tried to help. And you said your phone with white screen and shutdown on 30 seconds. You changed UPP and no changes -> means you changed UPP and your phone is still white screen and shutdown on 30 seconds. I think this was you meant by "NO CHANGES". And now your phone is not really ON and totally jammed, WHO KNOWS?? You do, and you never tell us, just said NO CHANGES.. You changed UPP once, as you thought UPP was the problem and you are not silly, and I think you're expert enough in repairing mobile phones, why didn't you replace one more UPP?? Maybe your UPP chip was bad. So try it yourself, no need to post if you don't need others' advices. rgds,

10-03-2006, 15:54	#10 (permalink)
dareevil Freak Poster Join Date: Mar 2004 Age: 47 Posts: 136 Member: 57502 Status: Offline Thanks Meter: 2	baraka42... agree.. good statement.. cheers,

10-03-2006, 16:13	#11 (permalink)
shoeb7 No Life Poster Join Date: Nov 2005 Location: india Age: 47 Posts: 859 Member: 196194 Status: Offline Thanks Meter: 47	bakara42.... is right . regards

10-04-2006, 02:54	#13 (permalink)
dareevil Freak Poster Join Date: Mar 2004 Age: 47 Posts: 136 Member: 57502 Status: Offline Thanks Meter: 2	Ekel, If you're wrong, you're wasting time.. hehehee... just kidding bro..

10-04-2006, 07:48	#14 (permalink)
.::AkhavanGSM::. No Life Poster Join Date: Jun 2002 Location: Iran Age: 47 Posts: 1,082 Member: 12724 Status: Offline Thanks Meter: 30	here is some thing wrong.I never said wrong answer is wasting time! "with white screen and shotdown on 30 seconds " If some one really read this before answering will never answer "FORMAT PHONE" I have repiled many thread and may some right and some wrong.also I received many replies,wrong or right.It is natural. Problem is this that some ppl want to help but they post answer before reading question.if phone shutdown in 30Sec then HOW to "1) try to do manual format" Or why to "2check display connector all pins are ok or need to resolder or need to replace display connector abdurahman is a good friend and his answer was common answer for 6600 problems.BUT as I wrote in my answer before problem is . wrong repiles are welcome (IF you read my question first!!!)

10-04-2006, 12:17	#15 (permalink)
dareevil Freak Poster Join Date: Mar 2004 Age: 47 Posts: 136 Member: 57502 Status: Offline Thanks Meter: 2	GSMLight, I am sure everyone who tried to help with any answer here, had read your post/problem first. But we're from around the world, with their own languages. So if miscommunication happened here, it's very normal. Sometimes ppl here catch the wrong meaning, and we have to understand.. My english is not good too, I just studied english language at school and college. If I did mistake, hopefully everyone here may understand. If you think somebody's answer is wrong, no need to say that it was wasting time. These words could hurt other's feelings. How if this what happened on you? You try to help with your reply, but the one who posts the question reply you that you're wasting his time and your own time and he is not too silly not to do the step you tell him first, HOW DO YOU FEEL? It's hurt, right?? Anyway, just forget it. And I hope you will find out a good solution for your problem, and then don't forget to share with us. Good luck, GSMLight...