-= Band Convert Nokia 6101B/6102 to 6101 =- - GSM-Forum

pawaa · 11-01-2005, 11:35

Software Modification

No software modification is required because 6101b is already tri-band (850&900/1800/1900) but if you want then you can simply flash it with RM-76 Data Package.

Hardware Modification

A self explainer picture is attached but if you are unable to understand then consider following lines a short description.

2 network filters (Rx & Tx) are needed to be replaced with proper filters which can be taken from any damaged 6230 or similar phone or you can redirect them using a capacitor, for batter performance you can try different values.

[PaWaa]

wynasoft1 · 11-03-2005, 22:46

do you have 6101 rm76 pm please share.

regards

pawaa · 11-04-2005, 17:38

Quote:

Originally Posted by wynasoft1

do you have 6101 rm76 pm please share.
regards

Download the attached file and remove .txt from its end.

[PaWaa]

Alkapone · 11-04-2005, 17:53

Interesting, why nokia started puting this info in theyr service manuals

B.R.
Alkapone

pawaa · 11-04-2005, 18:29

Quote:

Originally Posted by Alkapone

Interesting, why nokia started puting this info in theyr service manuals

B.R.
Alkapone

those pictures are taken from service manual but are edited and i added some information on these pictures ... ******8**
[PaWaa]

NO INSULTS

wynasoft1 · 11-04-2005, 18:36

thak you man im gong to check.

best regards

ReyTech · 11-06-2005, 14:08

Quote:

Originally Posted by pawaa

Software Modification
No software modification is required because 6101b is already tri-band (850&900/1800/1900) but if you want then you can simply flash it with RM-76 Data Package.
Hardware Modification
A self explainer picture is attached but if you are unable to understand then consider following lines a short description.
2 network filters (Rx & Tx) are needed to be replaced with proper filters which can be taken from any damaged 6230 or similar phone or you can redirect them using a capacitor, for batter performance you can try different values.
[PaWaa]

@Pawaa
Thanks for the info! its very useful, but needed to know if we can use any value capacitor?
WBR
ReyTech.

Abelardz23 · 11-06-2005, 14:20

and what should be the capacitor type to be used and its value??? I really appreciate this info you shared to us...

THANK YOU VERY MUCH

Syed · 11-10-2005, 05:51

Quote:

Originally Posted by pawaa

Software Modification
No software modification is required because 6101b is already tri-band (850&900/1800/1900) but if you want then you can simply flash it with RM-76 Data Package.

[PaWaa]

the MCU does support both 850 and 900 so no need flash but u still need to write PM from a 900/1800/1900 phone, since phone is tuned to 850 MHz otherwise no network or weak network.. and this is tested !

WBR
Syed

Alkapone · 11-10-2005, 08:53

@Pawaa

Dont be angry, and I dont want to say, that info you posted is not valued. It's ok, just my question, what from that info for nokia, why they started putting that kind of info.

p.s. I was smart enaught to find that info ~1 month till you posted, and understood withot sm 'modifications' ... no need to be insulting.

B.R.
Alkapone

pawaa · 11-10-2005, 20:38

Quote:

Originally Posted by Alkapone

@Pawaa
Dont be angry, and I dont want to say, that info you posted is not valued. It's ok, just my question, what from that info for nokia, why they started putting that kind of info.
p.s. I was smart enaught to find that info ~1 month till you posted, and understood withot sm 'modifications' ... no need to be insulting.
B.R.
Alkapone

Apology!!! have a good time around.

[PaWaa]

mangaman · 11-14-2005, 20:39

thanks .. but ist it hardware or software modification !!???????

please ??????????????????

ReyTech · 11-15-2005, 10:37

Quote:

Originally Posted by Syed

the MCU does support both 850 and 900 so no need flash but u still need to write PM from a 900/1800/1900 phone, since phone is tuned to 850 MHz otherwise no network or weak network.. and this is tested !
WBR
Syed

@syed
Then u mean to say that no need the hardware modification as well? and if hardware modification is necessary then can we use the jump thru capacitors as we do in 1100? and can u pls inform how is it to be jumped? like in 1100 "last contact to the center contact" & in 6101 how is it? or is it same?
WBR
ReyTEch.

pawaa · 11-15-2005, 11:55

Quote:

Originally Posted by ReyTech

@syed
Then u mean to say that no need the hardware modification as well? and if hardware modification is necessary then can we use the jump thru capacitors as we do in 1100? and can u pls inform how is it to be jumped? like in 1100 "last contact to the center contact" & in 6101 how is it? or is it same?
WBR
ReyTEch.

Hardware modification is the most importent thing, you can skipp software modification. you can use jump through capacitors exectly like 1100.

What every i posted is based on experiances.
[PaWaa]

Syed · 11-15-2005, 14:59

yes u can use capacitors.. but will have problems in network sometimes... so better to use proper filters

u can skip flashing but still need to write PM !!

WBR
Syed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
convert 6102 to 6101 900MHz	reaz.com	Nokia Hardware & Hardware Repair	28	04-20-2012 09:18
how to convert nokia 2115 1900mzh to 800mzh	victor2006	Nokia CDMA	2	05-31-2009 07:30
Need to convert nokia 1200 rh99 to nokia 1200 rh 100	krich70	Nokia Digital Core Technology 4 ( DCT-4 )	0	05-23-2009 00:47
no network nokia 6101b wanna to change 6101	tarey888	Nokia Hardware & Hardware Repair	0	10-30-2006 11:07
nokia 6101b refuse to sent message help me	maxheadquarters	Nokia Hardware & Hardware Repair	0	03-29-2006 23:59

11-03-2005, 22:46	#2 (permalink)
wynasoft1 No Life Poster Join Date: Dec 2004 Location: all over the world Age: 45 Posts: 1,041 Member: 101769 Status: Offline Sonork: 100.95669 Thanks Meter: 68	do you have 6101 rm76 pm please share. regards

11-04-2005, 17:53	#4 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	Interesting, why nokia started puting this info in theyr service manuals B.R. Alkapone

11-04-2005, 18:36	#6 (permalink)
wynasoft1 No Life Poster Join Date: Dec 2004 Location: all over the world Age: 45 Posts: 1,041 Member: 101769 Status: Offline Sonork: 100.95669 Thanks Meter: 68	thak you man im gong to check. best regards

11-06-2005, 14:20	#8 (permalink)
Abelardz23 Freak Poster Join Date: Oct 2003 Location: Philippnes,Pasig City Posts: 338 Member: 42165 Status: Offline Thanks Meter: 35	and what should be the capacitor type to be used and its value??? I really appreciate this info you shared to us... THANK YOU VERY MUCH

11-10-2005, 08:53	#10 (permalink)
Alkapone No Life Poster Join Date: Dec 2002 Location: Lithuania Age: 40 Posts: 1,189 Member: 19265 Status: Offline Thanks Meter: 92	@Pawaa Dont be angry, and I dont want to say, that info you posted is not valued. It's ok, just my question, what from that info for nokia, why they started putting that kind of info. p.s. I was smart enaught to find that info ~1 month till you posted, and understood withot sm 'modifications' ... no need to be insulting. B.R. Alkapone

11-14-2005, 20:39	#12 (permalink)
mangaman Freak Poster Join Date: Aug 2001 Location: jordan Posts: 266 Member: 5778 Status: Offline Thanks Meter: 10	thanks .. but ist it hardware or software modification !!??????? please ??????????????????

11-15-2005, 14:59	#15 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	yes u can use capacitors.. but will have problems in network sometimes... so better to use proper filters u can skip flashing but still need to write PM !! WBR Syed