GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Hardware & Hardware Repair


Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section.

Reply
 
LinkBack Thread Tools Display Modes
Old 10-11-2001, 23:34   #1 (permalink)
Freak Poster
 
Join Date: Jun 2000
Posts: 354
Member: 1623
Status: Offline
Thanks Meter: 1
Post 5110 dead but accepting Flash programming.


Hi,

I encountered 2 times to this problem.Phone accept Flash (Full or Partial) but doesn't turn on.<br />I replaced 13 Mhz OSC , Resistor above the CCONT which goes to the POWER ON/OFF switch,32768 Hz XTAL,Resolder All IC'S (CCONT,COBBA,RAM,FLASH,EEPROM,MCU) but nothing has changed.<br />Can you give me any idea ?

Best Regards...

------------------------------------------------<br />Nightxyz always shares his knowledge and helps all people... <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <img src="smile.gif" border="0">
  Reply With Quote
Old 10-12-2001, 10:00   #2 (permalink)
Freak Poster
 
Join Date: Feb 2001
Location: Cj,Ro,Eu
Posts: 445
Member: 3262
Status: Offline
Thanks Meter: 1
Post

Hi!<br />Try to flash phone from 20000-&gt;30000 same version and same ppm.If you don't know version read flash from 20 000-20 100 and open it with an hexeditor.You will see on the right side(ascii zone) the version and the ppm pachage. Than try to read all flash from 20000-&gt;40000 and repaired it with nfree Alabaster B2 from Viper. It works for me on a 3310 v.4.45-dead, but now it's working 100%.<br />My best regards to all<br />cosmo<br />icq:123846927
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
t100 dead.. but can flash s4sajii Samsung Hardware Repair 6 02-14-2004 03:44
5110 dead,but flash is ok,can read n write fiZ Nokia Hardware & Hardware Repair 9 10-05-2002 15:06
s35 dead but can flash joe locks x1x to x45/x50 7 09-21-2002 20:05
x2288 dead won't accept flashing -- why? chris_ua Motorola Old Legacy (EMMI) 0 09-11-2002 01:05
6210&3310 dead but can flash joe locks Nokia Hardware & Hardware Repair 8 07-01-2002 12:35

 



All times are GMT +1. The time now is 12:48.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.14975 seconds with 10 queries

SEO by vBSEO