Dead Dct 4 phones ,flashes but still dead - GSM-Forum

eko · 04-29-2004, 16:01

I got Dct 4 phones , 6310i and 7600 to be precise, i do complete flash on the phones using ufs ,everything went well , but the phones are still not coming on, whenever i try to switch them on , they come on slightly like a blink.

Also while the phone is connected to the box and i try to go into normal mode, its always impossible with a fatal error message.

Any suggestions regarding this are highly appreciated.

higherzman · 04-29-2004, 16:47

hi
what version of dct-x 1.2 you use??? because i 've successfully flashed one 7600 phone with dctx-1.2k but this version can't direct unlock it

Br

gsm_style · 04-29-2004, 17:35

i have the same problem with a 6610, 6100, 7210 and i use neelix 3 and in normal mode when the phone is connect he goes on, when i disconnect it and put a accu in the phone he will not go on.
i think it's the uem or upp

eko · 04-29-2004, 19:26

@higherzman,

I use V1.2o , but i can flash the 7600 and direct unlock it in test or local mode.

The problem you might need to read and understand again.

eko · 04-29-2004, 21:05

The 7600 was sorted, thanks for your response guys still having problems with the 6310i.

higherzman · 04-29-2004, 21:50

try a new version of flash files

Br

Engineer · 04-29-2004, 22:47

try to reflash the phone, with different version of flash files..
Maybe the power switch (as you said it flashes fine)
If problem still persist, possibly looking at UEM.

04-29-2004, 16:01	#1 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	Dead Dct 4 phones ,flashes but still dead I got Dct 4 phones , 6310i and 7600 to be precise, i do complete flash on the phones using ufs ,everything went well , but the phones are still not coming on, whenever i try to switch them on , they come on slightly like a blink. Also while the phone is connected to the box and i try to go into normal mode, its always impossible with a fatal error message. Any suggestions regarding this are highly appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6600 dead taking flashing,but still dead	sandeepmtc	Nokia Hardware & Hardware Repair	0	08-24-2007 17:53
K500i full flashes, but still dead	jackle123	Sony Ericsson Hardware Repair	0	06-20-2005 09:43
flash but still dead??	ndagi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-26-2005 21:43
c45 ba20 flashed but still dead	robba	x1x to x45/x50	4	07-29-2003 16:48

04-29-2004, 16:47	#2 (permalink)
higherzman No Life Poster Join Date: Dec 2003 Location: Paris, France Age: 45 Posts: 932 Member: 45387 Status: Offline Thanks Meter: 53	hi what version of dct-x 1.2 you use??? because i 've successfully flashed one 7600 phone with dctx-1.2k but this version can't direct unlock it Br

04-29-2004, 17:35	#3 (permalink)
gsm_style Freak Poster Join Date: Mar 2003 Location: nederland Age: 52 Posts: 251 Member: 24929 Status: Offline Thanks Meter: 7	i have the same problem with a 6610, 6100, 7210 and i use neelix 3 and in normal mode when the phone is connect he goes on, when i disconnect it and put a accu in the phone he will not go on. i think it's the uem or upp

04-29-2004, 19:26	#4 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@higherzman, I use V1.2o , but i can flash the 7600 and direct unlock it in test or local mode. The problem you might need to read and understand again.

04-29-2004, 21:05	#5 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	The 7600 was sorted, thanks for your response guys still having problems with the 6310i.

04-29-2004, 21:50	#6 (permalink)
higherzman No Life Poster Join Date: Dec 2003 Location: Paris, France Age: 45 Posts: 932 Member: 45387 Status: Offline Thanks Meter: 53	try a new version of flash files Br

04-29-2004, 22:47	#7 (permalink)
Engineer Freak Poster Join Date: Nov 2003 Posts: 325 Member: 44658 Status: Offline Thanks Meter: 0	try to reflash the phone, with different version of flash files.. Maybe the power switch (as you said it flashes fine) If problem still persist, possibly looking at UEM.