dropped 6600 no network ????

[lrpa]

This dropped phone woking fine except could not detect network and some noise in the speaker but could play clearly some sound file. when manually search for network it took a long time i had to exit, i have check and clean antenna connector,reheat rf ic but not yet solve.

Here is some questions i had:

1. how do i reheat PA ? it is somewhat made of rubber at the upper layer (please give me some guide).
2. I heard that reheating antenna switch and SHFVCO can dammage it, so how do i check it ?
3. Is there any suspect damage other than the above mentioned parts.
4. How do i check 900MHz,1800MHz and 1900MHz, is it posible by itself through some code input or i had to use some tools if so, which tools.

PS. This phone i thing is 100% HW problem b'coz i have flash the MCU,PPM, format user area,reset UI full factory.

[lrpa]

I guess noone wants to reply

[EGY2004]

you must be use v. 1.3 k ufs and make pm and remove sim lock

[Cowboy]

Can anyone help me in unlocking a Nokia 6600 Phone.

[Raheeeeb]

based in your words try this steps and post the result please:

1-change pa not re heat it
2-if after change pa find in manual search no network found or found network but can not access the network change the mojilner ( rf processor) this if you only sure the pa you used in step 1 is working 100%

br.,

[lrpa]

I think the PA has a rubber in the top how do i change it will it damage if i heat it with hot air.

[Raheeeeb]

no the pa ruuber cover used in 6600 not damaged

[viks]

u didnt clear the point that after long searching wat d phone says
if no network found then u have 2 change UEM
& if no access then change PA

[GsmMunna]

ger we dont need to change pa every time.. just flash phone with ufs tornado. wn phone flashed put it to normal mode manulythan intl simlocks full factory reset. then other options yr phone will be oki
WBR
MUNNA

[lrpa]

Ok have solved the prob by changing the PA

[MAGDY2]

tnx m8 .

[nilesoft_eg]

nice work