Error flashing 6600 - GSM-Forum

pazeth™ · 08-05-2005, 16:49

Hi all,
I have new problem for all, I try to flash dead 6600 and I got this error message:

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
Fl3: 0x06000000-0x067FFFFF,0001267E,Amd 29BDS643HT
Algorithm: w3_amd.fia, w3_cbusb.fia
Algorithm Ok, MSID: 84548C9EE7F263FAAD66658BAB
Decoded MSID: 3E4EBAF7-005B90CE-AA000000
Encoded FAID: AD0A4C11-0E60D91F-43F54830
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:28
Area3: 0x04000000-0x046FFFFF Erased, Time: 01:09
Erasing: 0x06000000-0x066FFFFF ...
Erasing Error: 10, at: 0x06560000-0x0657FFFF, 940203, Time: 00:53
Process Failed, Repowering Mobile

There are 4 flash IC on board, the problem is... where is damaged flash IC?
I'm add picture with number write on it to make easy for helper
Please help me to slove this problem

Regards
pazeth

Chevka · 08-05-2005, 17:05

ic flash fl0=>no2, fl1=>1, fl2=>3, fl3=>4
ganti aja ic flash yg no 4 pada gambar atau coba dipanasin dulu bung pazeth.

pazeth™ · 08-05-2005, 17:54

Quote:

Originally Posted by Chevka

ic flash fl0=>no2, fl1=>1, fl2=>3, fl3=>4
ganti aja ic flash yg no 4 pada gambar atau coba dipanasin dulu bung pazeth.

thanks for your responding, I was rehot it with some of good flux but not slove, now I will change it, but I have different code with my new flash IC for 6600 , damaged flash IC code is AMD, N643HT6KI, CHINA, and new one is AMD, N643HT7MI, THAILAND

if I change one (number 4) with new one ( different code) is it will working?

recepoz · 08-05-2005, 18:36

uninstall the suite and install again...

m:asafyry · 08-05-2005, 18:41

try to change n 4 but must read the same code in the end by 3ht and it will work

gsmindia · 08-05-2005, 18:48

Quote:

Originally Posted by Chevka

ic flash fl0=>no2, fl1=>1, fl2=>3, fl3=>4
ganti aja ic flash yg no 4 pada gambar atau coba dipanasin dulu bung pazeth.

excellent post chevka just repaired 2 handsets using this tip

is it possible to interchange the 4 flash ics

pazeth™ · 08-05-2005, 19:28

Problem Sloved!

Change 2 flash IC like picture bellow:
fullerase->flash mcu+ppm->write pm->unlock->format user are 3 times

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NSS 1.0.37.2 error flash 6600	genocite	Federal One	6	09-12-2006 18:22
6600 flashing error now 6600 dead	kabeermaster25	Nokia Hardware & Hardware Repair	25	04-08-2006 02:31
"BDBDADAD" GRIFFIN ERROR FLASHING NOKIA 6600	rovick	Nokia Multimedia	2	10-18-2004 09:36
Error Flashing 6600	acomtech	WD2 & APE (Symbian Phones)	5	07-19-2004 05:41

08-05-2005, 17:05	#2 (permalink)
Chevka No Life Poster Join Date: Sep 2004 Location: NeverL@Nd Posts: 758 Member: 82106 Status: Offline Thanks Meter: 1,208	ic flash fl0=>no2, fl1=>1, fl2=>3, fl3=>4 ganti aja ic flash yg no 4 pada gambar atau coba dipanasin dulu bung pazeth.

08-05-2005, 18:36	#4 (permalink)
recepoz Freak Poster Join Date: Aug 2005 Age: 43 Posts: 333 Member: 167500 Status: Offline Thanks Meter: 16	uninstall the suite and install again...

08-05-2005, 18:41	#5 (permalink)
m:asafyry Freak Poster Join Date: Jun 2005 Location: UNITED ARAB EMARATS Posts: 241 Member: 155314 Status: Offline Sonork: 1001608762 Thanks Meter: 10	try to change n 4 but must read the same code in the end by 3ht and it will work