help nokia e7 lcd way

[mkgunner]

Originally Posted by .:SARCAR:.

@ mkgunner ,

that pin goes into imaging processor D1400 pin no L5 . but there is a test point there J1429 . I attach a picture and mark that testpoint . you may connect in J1429 from esd filter . it's a B3 pin of esd filter .

post result .

I don't have picture yet. I marked how i do the jumpers, the damaged pin and the one i don't know if it is ok. Advise?


https://imgur.com/a/Vxssc8h

[.:SARCAR:.]

yes , jumper like that and check .

[mkgunner]

Originally Posted by .:SARCAR:.

yes , jumper like that and check .

Still no picture. I suspect this contact is broken too. Any lead to it?

[.:SARCAR:.]

that's a TE0 signal , it goes into 2nd pin of below connector . I attach another picture and draw jumper .

[mkgunner]

Originally Posted by .:SARCAR:.

that's a TE0 signal , it goes into 2nd pin of below connector . I attach another picture and draw jumper .

No picture after this too...
I have no idea what else to try. The display is working tested on other phone

[.:SARCAR:.]

did you check flex cable ?

[mkgunner]

Originally Posted by .:SARCAR:.

did you check flex cable ?

Yeah i cant see nothing wrong woth the flex...