|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section. |
| LinkBack | Thread Tools | Display Modes |
03-12-2017, 18:33 | #1 (permalink) |
Major Poster Join Date: Nov 2011
Posts: 48
Member: 1695219 Status: Offline Thanks Meter: 16 | lumia 925 dead / after 30 seconds battery drops to 1V have a dead logic board here - no charging (0 Amps consumption) no power. new battery on actual 4V - no power following vbattery from x2002 over v4290 - caps 2001 2002 4207 4208 over to pmic n4200 ---> 4 V for 20 or 30 seconds then drop to about 1 V something ( only battery plugged in the board and no power on attempt) or before 30 seconds just measure any other component around n4200 / close to c4208 ( eg L4202 ) and then measure right again vbat ( eg on c4208) same voltage drop but immediately without waiting 30 seconds no shorts to gnd on vbat - desoldered v4290 --> no change in behavior reflowed n4200 --> no change desoldered n4200 ---> no voltage drop on its own ( also not after 4 minutes) but right after measuring any other component around ( as I did before and said above ) voltage drop to ( this time !!) 2.8V any ideas ? thx |
Bookmarks |
| |
|