N70 , Chargint but not coming ON - Page 2 - GSM-Forum

rana_sab · 12-17-2006, 06:54

dear in all nokia handset always one point connected to ground so check the track which point attached to ground then put jumper to the second point
for more see the 3rd post right side connected to ground so we make jumpers from left side to that point which i mark in my post# 10

mobilagy · 12-17-2006, 11:14

Quote:

Originally Posted by smartfone

Do we remove the glass ic and from the 2nd point we link a wire to the power switch? And do we link to the left or right hand side of the power switch???

no, no need to remove it, you can do it by scratching the mentioned point in the attached picture then make a link from it to the non GND pins of the power switch ...

zendgee36 · 12-20-2006, 06:31

hello brother this is very simpel prb u see the up retu ic and in first twq regist u see between one line u scratch it and make a jumper to switch this is very easy to solved the switch prb

johnmene · 12-21-2006, 03:12

why u dont believe in me? i try this many many times, infact this is 100% working. try to try and error remove the lcd ic and try to switch on it doesnt work!!!!!!!!!!!!

capri · 01-30-2007, 08:54

Quote:

Originally Posted by mobilagy

no, no need to remove it, you can do it by scratching the mentioned point in the attached picture then make a link from it to the non GND pins of the power switch ...

Good work man...

br

capri

sulai2k · 01-30-2007, 11:23

u check R4406

change 100% ok

TopGsm2002 · 02-12-2007, 23:38

Quote:

Originally Posted by rana_sab

see the attachmint this is the 100% solution for your problem

Good solution thaks ,

.:KHALIFA:. · 02-13-2007, 05:59

Quote:

Originally Posted by mobilagy

hey man, hi is saying that "the phone doesn't power on" not "the phone is not displaying" , there is nothing to do with the display IC.

on off track comes frm display ic in n70....

mobilagy · 02-13-2007, 06:45

Quote:

Originally Posted by khalifa_smart

on off track comes frm display ic in n70....

don't you see these two replies by me !!!

Quote:

Originally Posted by mobilagy

well, i have checked the measurement between the power switch & the point mentioned in your attached picture & i realized that the two points has a connectivity with resistance but i don't know how due to the schematic diagram that i mentioned !!!
may be it differ for some boards design.

Quote:

Originally Posted by mobilagy

no, no need to remove it, you can do it by scratching the mentioned point in the attached picture then make a link from it to the non GND pins of the power switch ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6111 charging but not comes on solution here..	chohansahib	Nokia Hardware & Hardware Repair	0	02-17-2010 01:25
n70. charge, but not switch on	escorpiao	Nokia Hardware & Hardware Repair	9	10-11-2008 09:36
N70, Chargint but now swithing ON	bakhshalvi007	Nokia Hardware & Hardware Repair	1	11-26-2006 12:11
Sony Ericsson p910i charge but not coming on	Ggnets	Sony Ericsson Hardware Repair	1	09-09-2005 18:19
??? Ericsson Not Come On, But Service Light Steady Glow	dannyogolo	Old Ericsson Phones & Sony Phones	1	03-05-2003 17:48

12-17-2006, 06:54	#16 (permalink)
rana_sab No Life Poster Join Date: Apr 2004 Location: Pakistan Age: 46 Posts: 689 Member: 62911 Status: Offline Thanks Meter: 156	dear in all nokia handset always one point connected to ground so check the track which point attached to ground then put jumper to the second point for more see the 3rd post right side connected to ground so we make jumpers from left side to that point which i mark in my post# 10

12-20-2006, 06:31	#18 (permalink)
zendgee36 Cheater -Don't Deal with him- Join Date: Dec 2006 Location: Riyadh saudia Posts: 542 Member: 407564 Status: Offline Thanks Meter: 141	hello brother this is very simpel prb u see the up retu ic and in first twq regist u see between one line u scratch it and make a jumper to switch this is very easy to solved the switch prb

12-21-2006, 03:12	#19 (permalink)
johnmene Freak Poster Join Date: Mar 2005 Location: riyadh Age: 44 Posts: 190 Member: 125111 Status: Offline Thanks Meter: 25	why u dont believe in me? i try this many many times, infact this is 100% working. try to try and error remove the lcd ic and try to switch on it doesnt work!!!!!!!!!!!!

01-30-2007, 11:23	#21 (permalink)
sulai2k Freak Poster Join Date: Jul 2006 Posts: 420 Member: 311025 Status: Offline Sonork: 100.1607375 Thanks Meter: 171	u check R4406 change 100% ok