GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Nokia > Nokia Hardware & Hardware Repair
Reload this Page Need 25pin (6270,6280,3230)keypad Jumper
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Nokia Hardware & Hardware Repair all what you need for Hardware Repairing for Nokia Phones. Before writing any thread here try to check the Frequently Asked Questions Section.

Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 04-18-2008, 06:12   #1 (permalink)
No Life Poster
 
CHAPRAN's Avatar
 
Join Date: Jun 2003
Location: gods on country(kerala)
Posts: 1,769
Member: 31906
Status: Offline
Thanks Meter: 101
Need 25pin (6270,6280,3230)keypad Jumper

NEED 25PIN (6270,6280,3230)KEYPAD JUMPER OR WICH IC SUPPORT FOR THIS?HELP.....
  Reply With Quote
The Following 3 Users Say Thank You to CHAPRAN For This Useful Post:
Show/Hide list of the thanked
Old 04-18-2008, 06:29   #2 (permalink)
Freak Poster
 
bhuvanele's Avatar
 
Join Date: Feb 2006
Location: India
Posts: 459
Member: 237210
Status: Offline
Thanks Meter: 90
6600 display ic suitable for this.
  Reply With Quote
The Following User Says Thank You to bhuvanele For This Useful Post:
Old 04-18-2008, 06:31   #3 (permalink)
No Life Poster
 
CHAPRAN's Avatar
 
Join Date: Jun 2003
Location: gods on country(kerala)
Posts: 1,769
Member: 31906
Status: Offline
Thanks Meter: 101
Quote:
Originally Posted by bhuvanele View Post
6600 display ic suitable for this.
THANKS FOR REPLAY..................
  Reply With Quote
The Following User Says Thank You to CHAPRAN For This Useful Post:
Old 04-18-2008, 10:48   #4 (permalink)
No Life Poster
 
Join Date: Mar 2007
Location: Roumania
Posts: 1,140
Member: 461923
Status: Offline
Thanks Meter: 2,020
6600 display ic is NOT good for 6270, 6280, 3230 keypad IC..use only EMIF10COM01F2 FES (Nokia 6280 N70 6234 6151 ETC)
  Reply With Quote
The Following User Says Thank You to stefani For This Useful Post:
Old 04-18-2008, 13:57   #5 (permalink)
No Life Poster
 
CHAPRAN's Avatar
 
Join Date: Jun 2003
Location: gods on country(kerala)
Posts: 1,769
Member: 31906
Status: Offline
Thanks Meter: 101
Quote:
Originally Posted by stefani View Post
6600 display ic is NOT good for 6270, 6280, 3230 keypad IC..use only EMIF10COM01F2 FES (Nokia 6280 N70 6234 6151 ETC)
AGREE WITH U......any methode for short key pad ic 1 and 2 (v401) my 4nos 3230 ...1,5,9,*,endkey notworking...help
  Reply With Quote
The Following User Says Thank You to CHAPRAN For This Useful Post:
Old 04-18-2008, 14:02   #6 (permalink)
No Life Poster
 
Join Date: Mar 2007
Location: Roumania
Posts: 1,140
Member: 461923
Status: Offline
Thanks Meter: 2,020
man..better change IC..work 100%.....
  Reply With Quote
The Following User Says Thank You to stefani For This Useful Post:
Old 06-06-2008, 10:42   #7 (permalink)
Junior Member
 
Join Date: May 2008
Location: kerala , india
Posts: 12
Member: 776185
Status: Offline
Thanks Meter: 8
6270 keypad
6270 keypad not working pls help me
  Reply With Quote
The Following User Says Thank You to baijuinfo For This Useful Post:
Old 06-06-2008, 11:55   #8 (permalink)
No Life Poster
 
Join Date: Mar 2007
Location: Roumania
Posts: 1,140
Member: 461923
Status: Offline
Thanks Meter: 2,020
Quote:
Originally Posted by baijuinfo View Post
6270 keypad not working pls help me
..mr...wich key don't work???
  Reply With Quote
Old 06-06-2008, 12:30   #9 (permalink)
Registered User
 
Join Date: Jan 2008
Location: NARAYANGONJ BANGLADESH
Age: 36
Posts: 583
Member: 688907
Status: Offline
Thanks Meter: 509
change the keyped ic.
  Reply With Quote
The Following User Says Thank You to prakash6464mh For This Useful Post:
Old 06-07-2008, 05:49   #10 (permalink)
Junior Member
 
Join Date: Mar 2007
Posts: 6
Member: 466262
Status: Offline
Thanks Meter: 0
blank disply n70
pls help....................................
  Reply With Quote
Old 05-02-2009, 14:52   #11 (permalink)
Junior Member
 
Join Date: Jan 2007
Posts: 32
Member: 442066
Status: Offline
Thanks Meter: 8
plz help ene n70 wight screen and not boot


any good solution
  Reply With Quote
Old 05-02-2009, 15:03   #12 (permalink)
Junior Member
 
Join Date: Jan 2007
Posts: 32
Member: 442066
Status: Offline
Thanks Meter: 8
JAF version 1.98.63
Detected PKEY: 9000C978
Card life counter: 88.38%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-84\
Scanning for ini files...
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50609201.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50609201_v2.V10
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 1E80000296964651E0E10D7B80659CA587E5FD41
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Done!
Restarting phone...Done!
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Saved to C:\Program Files\ODEON\JAF\ProgData\35709300931948_CRT_backup _193025.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\357093009319488_CRT_backu p_193025.pm
Done!
Backup LCK OK!
Manual mode selected, version can't be checked!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 1E80000296964651E0E10D7B80659CA587E5FD41
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Operation took 0 minutes 4 seconds...
Sending CNF Data...
APE blocks present in flash file but no APE mcu detected in phone. Aborting!






plz help me
  Reply With Quote
Old 05-02-2009, 15:04   #13 (permalink)
Freak Poster
 
erick_ponsel88's Avatar
 
Join Date: Feb 2009
Location: jl.delima no.17 panam
Posts: 347
Member: 969971
Status: Offline
Sonork: Vincent_Lim
Thanks Meter: 294
Quote:
Originally Posted by dipingeorge View Post
plz help ene n70 wight screen and not boot


any good solution
try this..


http://img365.imageshack.us/my.php?image=n70blank.jpg
  Reply With Quote
The Following User Says Thank You to erick_ponsel88 For This Useful Post:
Old 05-02-2009, 15:07   #14 (permalink)
Freak Poster
 
erick_ponsel88's Avatar
 
Join Date: Feb 2009
Location: jl.delima no.17 panam
Posts: 347
Member: 969971
Status: Offline
Sonork: Vincent_Lim
Thanks Meter: 294
Quote:
Originally Posted by CHAPRAN View Post
NEED 25PIN (6270,6280,3230)KEYPAD JUMPER OR WICH IC SUPPORT FOR THIS?HELP.....

try this...


http://img365.imageshack.us/my.php?image=20530955.jpg
  Reply With Quote
Old 05-02-2009, 15:48   #15 (permalink)
Junior Member
 
Join Date: Jan 2007
Posts: 32
Member: 442066
Status: Offline
Thanks Meter: 8
JAF version 1.98.63
Detected PKEY: 9000C978
Card life counter: 88.38%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-84\
Scanning for ini files...
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50609201.C0
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-84\RM84_50609201_v2.V10
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 1E80000296964651E0E10D7B80659CA587E5FD41
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Done!
Restarting phone...Done!
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Reading CMT NPC certificate...
Reading CMT VARIANT certificate...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Saved to C:\Program Files\ODEON\JAF\ProgData\35709300931948_CRT_backup _193025.rpl
Backup CRT OK!
Backing up SIMLOCK data...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\357093009319488_CRT_backu p_193025.pm
Done!
Backup LCK OK!
Manual mode selected, version can't be checked!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006000C192101002200
Asic Mode ID: 00
Asic EM ID: 00000341
Asic Public ID: 1E80000296964651E0E10D7B80659CA587E5FD41
HASH: E9EFF4BFAA5393217CA6B17755FC3E1400000000
ROM ID: F28A211FCEA7B19D
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv2_2nd.fg
Loader version: 01.15.00 -> Revision: 0000
Patching CMT boot step2...
CMT Boot Ready
CMT Flash ID: 00020001 <=> SPANSION -> Type not in database
CMT Flash Data: 00000000000000000000000000000000
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
CMT Loader Ready
Operation took 0 minutes 4 seconds...
Sending CNF Data...
APE blocks present in flash file but no APE mcu detected in phone. Aborting!






plz help me
  Reply With Quote
Reply
Page 1 of 2 1 2

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
6280 new keypad jumper ikram tabassum1 Nokia Hardware & Hardware Repair 0 09-14-2008 13:38
need help for my 6820a keypad jumper kamot37 Nokia Hardware & Hardware Repair 1 08-03-2008 09:21
6280 antenna switch jumper badly needed... amityville Nokia Hardware & Hardware Repair 0 05-06-2007 06:10
need games for 6280, 6270, 6230i SH-Usman Nokia Multimedia 0 08-16-2006 05:14
AVI Codecs for Nokia 6270, 6280 Needed dreamzvk Nokia Multimedia 0 07-04-2006 07:57

 



All times are GMT +1. The time now is 14:38.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.26267 seconds with 10 queries

SEO by vBSEO