nokia 1110 and 1600..... key pad and no led - GSM-Forum

allstarint2000 · 07-15-2007, 02:15

nokia 1110, there is no light when the coil removed, and i try to bridg the inerface of the coil and stil yet no light. please what is the solution? when the coil has been the removed.

allstarint2000 · 07-15-2007, 02:24

nokia 1110, there is no light when the glass ic beside of the coil removed, and i dont know how to connet the glass ic interface any body how know the reading of the panel it can send it to me, to my email address [email protected] OR [email protected]

allstarint2000 · 07-15-2007, 02:28

nokia 6060, menu key is not working what is the solution?

allstarint2000 · 07-15-2007, 02:31

nokia 1600, key pad 2,5,8,0 is not work what is the solution?

baldev · 07-15-2007, 08:16

No light will come when coil is removed.If coil is damaged then wind 7-8 turns of thin wire on that core and solder 2 ponts of wire to pcb were coil is soldered.for glass is there is a dot symbol on ic this symbol is toward '7' no. key.for 6060 and 1600 keys change keypad ic.

puneet14884 · 07-15-2007, 08:20

Quote:

Originally Posted by allstarint2000

nokia 1110, there is no light when the coil removed, and i try to bridg the inerface of the coil and stil yet no light. please what is the solution? when the coil has been the removed.

replace with new light ic.....all fine...post result

regards
PUNEET14884

puneet14884 · 07-15-2007, 08:22

Quote:

Originally Posted by allstarint2000

nokia 1600, key pad 2,5,8,0 is not work what is the solution?

replace keypad driver ic..........all fine

regards
PUNEET14884

syl phone · 07-15-2007, 14:58

Quote:

Originally Posted by allstarint2000

nokia 1110, there is no light when the coil removed, and i try to bridg the inerface of the coil and stil yet no light. please what is the solution? when the coil has been the removed.

try this i think its can solv ur problem

oss001 · 07-16-2007, 14:15

replace another coil don't bridg it that will work

oss001 · 07-16-2007, 14:18

to solve the keypad problem for 1600 change the keypad ic it's located near the sim base

Vibin A · 07-27-2007, 06:55

Quote:

Originally Posted by allstarint2000

nokia 6060, menu key is not working what is the solution?

first you chang the key pad ic, if not ok the problem will solve only by changing UPP

damio · 04-19-2008, 16:46

thanks........................

amol_sm · 04-19-2008, 17:10

Dude many times discuss this problem,
Use SEARCH button.

Simply see this thread.

Amol_Sm

galant2 · 04-19-2008, 18:18

Quote:

Originally Posted by allstarint2000

nokia 1600, key pad 2,5,8,0 is not work what is the solution?

Vibin A · 04-19-2008, 23:04

Quote:

Originally Posted by allstarint2000

nokia 6060, menu key is not working what is the solution?

change the key pad esd filter

07-15-2007, 02:15	#1 (permalink)
allstarint2000 Junior Member Join Date: Jul 2005 Location: Nigeria in ondo state Age: 47 Posts: 27 Member: 165835 Status: Offline Thanks Meter: 3	nokia 1110 and 1600..... key pad and no led nokia 1110, there is no light when the coil removed, and i try to bridg the inerface of the coil and stil yet no light. please what is the solution? when the coil has been the removed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOKIA 1110/1112/1600 Battery low SolutionNOKIA 1110/1112/1600 Battery low Solution	gsm junction	Nokia Hardware & Hardware Repair	3	05-06-2013 13:02
need solution for k618i no light in key pad and shorted	lilong_lee	Sony Ericsson Hardware Repair	0	03-22-2010 06:10
w850 no light in key-pad and lcd HELP ME!!!	zoni	Sony Ericsson Hardware Repair	5	07-14-2009 04:30
nokia 5300 lcd n key pad no light (water damage)	Kian9159	Nokia Hardware & Hardware Repair	0	08-11-2008 12:01
Nokia 1110 & 1600 Key Pad	gbadega	Nokia Hardware & Hardware Repair	7	06-13-2007 18:38

07-15-2007, 02:24	#2 (permalink)
allstarint2000 Junior Member Join Date: Jul 2005 Location: Nigeria in ondo state Age: 47 Posts: 27 Member: 165835 Status: Offline Thanks Meter: 3	nokia 1110, there is no light when the glass ic beside of the coil removed, and i dont know how to connet the glass ic interface any body how know the reading of the panel it can send it to me, to my email address [email protected] OR [email protected]

07-15-2007, 02:28	#3 (permalink)
allstarint2000 Junior Member Join Date: Jul 2005 Location: Nigeria in ondo state Age: 47 Posts: 27 Member: 165835 Status: Offline Thanks Meter: 3	nokia 6060, menu key is not working what is the solution?

07-15-2007, 02:31	#4 (permalink)
allstarint2000 Junior Member Join Date: Jul 2005 Location: Nigeria in ondo state Age: 47 Posts: 27 Member: 165835 Status: Offline Thanks Meter: 3	nokia 1600, key pad 2,5,8,0 is not work what is the solution?

07-15-2007, 08:16	#5 (permalink)
baldev No Life Poster Join Date: Jun 2005 Location: Punjab , INDIA Posts: 1,260 Member: 153805 Status: Offline Thanks Meter: 325	No light will come when coil is removed.If coil is damaged then wind 7-8 turns of thin wire on that core and solder 2 ponts of wire to pcb were coil is soldered.for glass is there is a dot symbol on ic this symbol is toward '7' no. key.for 6060 and 1600 keys change keypad ic.

07-16-2007, 14:15	#9 (permalink)
oss001 Freak Poster Join Date: Jul 2007 Location: some where Age: 41 Posts: 417 Member: 545608 Status: Offline Thanks Meter: 25	replace another coil don't bridg it that will work

07-16-2007, 14:18	#10 (permalink)
oss001 Freak Poster Join Date: Jul 2007 Location: some where Age: 41 Posts: 417 Member: 545608 Status: Offline Thanks Meter: 25	to solve the keypad problem for 1600 change the keypad ic it's located near the sim base

04-19-2008, 16:46	#12 (permalink)
damio Junior Member Join Date: Aug 2007 Posts: 34 Member: 565755 Status: Offline Thanks Meter: 5	thanks........................

04-19-2008, 17:10	#13 (permalink)
amol_sm No Life Poster Join Date: Sep 2006 Posts: 2,929 Member: 343326 Status: Offline Thanks Meter: 1,463	Dude many times discuss this problem, Use SEARCH button. Simply see this thread. Amol_Sm