nokia 1200 flashing failed - GSM-Forum

:Akintex: · 10-02-2011, 14:26

here is log

Code:

1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.2.0.0]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
Algorithm: u3_intel.fia, Ver: 4.80.0
Algorithm Ok, MSID: 84EA4280C4BD3AA146BD0E4FD6
Decoded MSID: 3E4EBAE9-00136371-AA000000
Encoded FAID: 310202D7-09D3A679-EC4EC477
IMAGE: rh99_05.060
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:36
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
Write Error: hDat 14, at: 0x01000000:08
Process Failed, Repowering Mobile

Code:

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.1.5.0 , NTMP ver: 2.4.16.0
Module ver: 1.0.0.17309(31-05-2011), Library ver: 1.0.0.10695(31-05-2011)
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0060 20C0 [unused/removed] 
FlashID1: 0003 8001 [unused/removed] 
FlashID2: 0000 0000 [unused/removed] 
FlashID3: FFFF FFFF [unused/removed] 
FlashID4: FFFF FFFF [unused/removed] 
FlashID5: FFFF FFFF [unused/removed] 
FlashID6: FFFF FFFF [unused/removed] 
FlashID7: FFFF FFFF [unused/removed] 
FlashID8: FFFF FFFF [unused/removed] 
FlashID9: FFFF FFFF [unused/removed] 
FlashID10: FFFF FFFF [unused/removed] 
UFS3 SarasSoft disconnected.

saman kumara · 10-02-2011, 14:47

re hot uem or re ball 10000000000% ok

jerryl27 · 10-02-2011, 15:03

Before heating uem or things like that clean the cable connector and try again.

ashwani_shukla · 10-02-2011, 15:12

rehot cpu...........

mheldwin · 10-02-2011, 15:45

100000000000000000000000005 solution,,, try to change or check the local mode solution,, if its lost,,,

:Akintex: · 10-03-2011, 17:46

i reball the uem,
changed the flash ic

but still same problem .

pls help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21

10-02-2011, 14:47	#2 (permalink)
saman kumara Registered User Join Date: Jul 2009 Location: sri lanka Posts: 544 Member: 1077541 Status: Offline Thanks Meter: 77	re hot uem or re ball 10000000000% ok

10-02-2011, 15:03	#3 (permalink)
jerryl27 Freak Poster Join Date: Jun 2010 Posts: 271 Member: 1320284 Status: Offline Thanks Meter: 16	Before heating uem or things like that clean the cable connector and try again.

10-02-2011, 15:12	#4 (permalink)
ashwani_shukla Freak Poster Join Date: Jun 2011 Location: at my home Posts: 143 Member: 1602338 Status: Offline Thanks Meter: 22	rehot cpu...........

10-02-2011, 15:45	#5 (permalink)
mheldwin Junior Member Join Date: Sep 2009 Posts: 6 Member: 1125385 Status: Offline Thanks Meter: 4	100000000000000000000000005 solution,,, try to change or check the local mode solution,, if its lost,,,

10-03-2011, 17:46	#6 (permalink)
:Akintex: Freak Poster Join Date: Aug 2010 Location: ind Posts: 356 Member: 1383260 Status: Offline Thanks Meter: 62	i reball the uem, changed the flash ic but still same problem . pls help