>>Nokia 1600 no network<< - GSM-Forum

thoyyu · 08-18-2006, 12:44

Hi Guys,

I have a nokia 1600 with no network...i flashed it & wrote a a gud pm ..but still theres no network...i washed & cleaned the contacts 2..didnt work

dose anyone have a gud solution

thanx in advance

gsmwonder · 10-25-2006, 14:17

I've one 1600 having same problem.. need solution too.

adnanali · 10-25-2006, 14:48

use paste and heat slow about 6 mints on flash ic and all will be ok

adnanali · 10-25-2006, 14:49

and one way is light lamp/100watts blub use for heat to all pcb

adnanali · 10-25-2006, 14:51

but remember heat distance from hot iron is 2 inch and blub/lamp is about 5 inch

adnanali · 10-25-2006, 14:51

heat from lamp untill pcb solders shined

08-18-2006, 12:44	#1 (permalink)
thoyyu Insane Poster Join Date: Apr 2006 Location: Male', Maldives Posts: 99 Member: 260672 Status: Offline Thanks Meter: 20	>>Nokia 1600 no network<< Hi Guys, I have a nokia 1600 with no network...i flashed it & wrote a a gud pm ..but still theres no network...i washed & cleaned the contacts 2..didnt work dose anyone have a gud solution thanx in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1600 no ring tone & no incoming voice	abhishekh53	Nokia Hardware & Hardware Repair	26	08-15-2011 16:25
>>5310 No Network<<	SAYCOMP	Nokia Hardware & Hardware Repair	8	11-21-2009 05:22
1600 no mic, no ringer, no speaker	alamgarh	Nokia Hardware & Hardware Repair	15	03-02-2009 00:22
>>Nokia 6080 No Display Light<<	SAYCOMP	Nokia Hardware & Hardware Repair	7	02-24-2009 16:17
1600 no ringing tone but works speaker and mic no vibrator	oranz	Nokia Hardware & Hardware Repair	5	01-27-2008 16:51

10-25-2006, 14:17	#2 (permalink)
gsmwonder Junior Member Join Date: Oct 2006 Posts: 1 Member: 377927 Status: Offline Thanks Meter: 0	I've one 1600 having same problem.. need solution too.

10-25-2006, 14:48	#3 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	use paste and heat slow about 6 mints on flash ic and all will be ok

10-25-2006, 14:49	#4 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	and one way is light lamp/100watts blub use for heat to all pcb

10-25-2006, 14:51	#5 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	but remember heat distance from hot iron is 2 inch and blub/lamp is about 5 inch

10-25-2006, 14:51	#6 (permalink)
adnanali No Life Poster Join Date: Dec 2005 Location: Gujjar AJK Posts: 2,074 Member: 207308 Status: Offline Thanks Meter: 471	heat from lamp untill pcb solders shined