nokia 1616 dead

[anajnisha]

any body help me . nokia 1616 dead. when i flash that phone flashing ok but not power on. i allready change lcd. any help from this fourm members

[shareef_786]

sir i have 1616 water damage set i clean it and when i flash, after flash phone turn on but not on with battery........ what is the solution pls help me
Thanks in advance

[rafi_5217705]

Originally Posted by anajnisha

any body help me . nokia 1616 dead. when i flash that phone flashing ok but not power on. i allready change lcd. any help from this fourm members

kindly try to on with box if your phone is on with box then your phone is ok not change lcd if your phone still possession then change lcd or repair hardware aria

[rafi_5217705]

Originally Posted by shareef_786

sir i have 1616 water damage set i clean it and when i flash, after flash phone turn on but not on with battery........ what is the solution pls help me
Thanks in advance

you must on phone with software box if your phone on with box Then pres power button if your phone is of then repair battery terminal way

[shareef_786]

sir i solve my problem with a jumper now my phone was working good.......
i don't know how to upload image to this forum if anyone want the solution call me on 9052660333 i will mail you that image anyway thank you so much for your replys thankssssssssssss

[***MALIK***]

here is jumper solution

[Azam_mp]

way ok but set not work...............

[Azam_mp]

mobile pc normal mode on but battery connection set not on.....

[moonluck]

hi pliz help me get the unlock code for nokia 161 and the IMEI no is 359042049835431, thanx

[Raman chopra]

Backup already exists(C:\mobileEx\3.5\data\backup\XGOLD_RH-125_95FE3350A701EAEE_IMEI.back)
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C085A94B
Using device: HTI, FW ver: 00.50, SN: 00013E27
Connection status: OHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 2254 - 23280002 [Samsung K8S6415ETC,64 Mbits]
CFI information:
Flash settings: 0/1, size: 0x00800000
2 Block regions:
127 x 0x00010000 = 0x007F0000
8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rh125_003.610
Downloading item CODE:hw_f11_rh125_r03.610.fls, num block: 3, size: 4.04 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming completed in 38.953 s
Erasing area 0x00C60000-0x00E5A5FE ...OK
Programming completed in 36.828 s
Erasing area 0x00FFC000-0x00FFC03E ...OK
Programming completed in 0.125 s
Checksum verified (0x9BE4)
Processing file: rh125_003.61aa
Downloading item CUST:hw_f11_rh125_003.61aa.fls, num block: 1, size: 2.13 MB
Erasing area 0x00210000-0x0042F4BE ...OK
Programming completed in 39.156 s
Checksum verified (0x1F90)
Processing file: rh1250_nai03.61aa
Downloading item CUST:hw_f11_rh1250_nai03.61aa.fls, num block: 1, size: 330.89 KB
Erasing area 0x00EB0000-0x00F01E7E ...OK
Programming completed in 6.078 s
Checksum verified (0x8F3C)
Total time for flashing process(boot+erase+write) was 2 min 47.125 s


Phone type: RH-125
SW version: V 03.61 29-01-10 RH-125 (c) Nokia
Imei plain: 35270404862349-1
Product code: 0595840
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: AA
Language Pack:
English,Dannish,Norwegian,Swedish


Imei net: 35270404862349
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
SERVER->MXKEY - BLADE X at host1, agent version 1.2 revision 0.5

Server: No such product code: 0583104
Server: No such product code: 0583104
Destination path: C:\Program Files\Nokia\Phoenix\Products\RH-125\
RH125_0583104_03.61_001.vpl already exist, download skipped.
RH125_0583104_03.61_001.dcp already exist, download skipped.
rh1250_nai03.61aa already exist, download skipped.
rh125_003.61aa already exist, download skipped.
rh125_003.610 already exist, download skipped.
0583104_SimLockDataVerifier_vDCT4.sim already exist, download skipped.
RH125_0583104_03.61_001.spr already exist, download skipped.
RH125_0583104_03.61_001_signature.bin already exist, download skipped.
Download completed.





Handset not work ??????????????/ plz help

[zoiya]

Brother chk the lcd ways if all point are ok then change lcd