Nokia 3100 Dead White LCD Only - GSM-Forum

zubairok · 09-04-2006, 12:17

Nokia 3100 dead when press power on just appears white light. I tried different software version but failed. I also chaged the lcd connector and lcd but problem is still there please if someone can solve this problem help me i will be greatfull.

tarunvishal · 09-04-2006, 12:36

reabowl all ic cpu uem hagr and flash and reflash the phone without cnt

arash-sos · 09-04-2006, 12:54

flash it with cnt file it will be ok

arash-sos · 09-04-2006, 12:55

always flash dct4 series with 3 files

arash-sos · 09-04-2006, 12:56

mcu ppm & cnt
cnt file is important

adampurhawks · 09-05-2006, 06:22

Hi Mate
Just

1) Erase Full Flash
2) Write Latest Flash Files from Support Site..
3) Write PM..
4) Write 128 K CNT File (The Main Step )
5) UI Settings..

good luck

Regards..
Adampur Hawks..

.::Munazzam::. · 11-01-2006, 18:16

but all other operations working successfully in nokia 3100 just blue lcd.plz help

baraka42 · 11-02-2006, 07:27

Quote:

Originally Posted by apna_mobile

but all other operations working successfully in nokia 3100 just blue lcd.plz help

check lcd socket connection with this pic.

efrcom · 11-02-2006, 10:52

Quote:

Originally Posted by apna_mobile

but all other operations working successfully in nokia 3100 just blue lcd.plz help

http:///vbb/showth...93#post2065093

look at these schematics. i am sure that it can be helpfull.

yours respectfully
efrcom_ Lutfi Cagil

yasser_elawad · 11-03-2006, 04:56

tell us if it start up or not ? if not start up try to chang uem

09-04-2006, 12:17	#1 (permalink)
zubairok No Life Poster Join Date: Jun 2006 Location: UK Posts: 1,152 Member: 294200 Status: Offline Sonork: 100.1586184 Thanks Meter: 658	Nokia 3100 Dead White LCD Only Nokia 3100 dead when press power on just appears white light. I tried different software version but failed. I also chaged the lcd connector and lcd but problem is still there please if someone can solve this problem help me i will be greatfull.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6630 Dead White Screen Only	swap002	Nokia Base Band 5 ( BB-5 )	1	08-11-2008 16:32
Nokia 6600 power on white LCD only (water damage) mostly solution	mobilagy	Nokia Hardware & Hardware Repair	11	12-25-2007 20:23
z550 white LCD only.plsssssssss hep	rk19801	Cruiser Suite	3	11-06-2007 08:26
6680 RM-36 white LCD only emergency calls	ESProc2k	Nokia Base Band 5 ( BB-5 )	1	07-22-2006 17:17
how i can flash Nokia 3100.....dead after flashing	bart3	Nokia Digital Core Technology 4 ( DCT-4 )	1	07-29-2004 14:22

09-04-2006, 12:36	#2 (permalink)
tarunvishal No Life Poster Join Date: Jul 2006 Posts: 833 Member: 308296 Status: Offline Thanks Meter: 152	reabowl all ic cpu uem hagr and flash and reflash the phone without cnt

09-04-2006, 12:54	#3 (permalink)
arash-sos Major Poster Join Date: Apr 2006 Age: 50 Posts: 45 Member: 257507 Status: Offline Thanks Meter: 0	flash it with cnt file it will be ok

09-04-2006, 12:55	#4 (permalink)
arash-sos Major Poster Join Date: Apr 2006 Age: 50 Posts: 45 Member: 257507 Status: Offline Thanks Meter: 0	always flash dct4 series with 3 files

09-04-2006, 12:56	#5 (permalink)
arash-sos Major Poster Join Date: Apr 2006 Age: 50 Posts: 45 Member: 257507 Status: Offline Thanks Meter: 0	mcu ppm & cnt cnt file is important

09-05-2006, 06:22	#6 (permalink)
adampurhawks Freak Poster Join Date: Apr 2006 Location: Inside PM Posts: 418 Member: 258154 Status: Offline Thanks Meter: 319	Hi Mate Just 1) Erase Full Flash 2) Write Latest Flash Files from Support Site.. 3) Write PM.. 4) Write 128 K CNT File (The Main Step ) 5) UI Settings.. good luck Regards.. Adampur Hawks..

11-01-2006, 18:16	#7 (permalink)
.::Munazzam::. Freak Poster Join Date: Mar 2006 Location: Sargodha Pakistan Posts: 420 Member: 251247 Status: Offline Sonork: 1001670304 Thanks Meter: 192	but all other operations working successfully in nokia 3100 just blue lcd.plz help

11-03-2006, 04:56	#10 (permalink)
yasser_elawad Junior Member Join Date: Oct 2004 Age: 43 Posts: 36 Member: 88790 Status: Offline Thanks Meter: 0	tell us if it start up or not ? if not start up try to chang uem