nokia 3120 cs,after reball uem set dead - GSM-Forum

sandeepmtc · 07-27-2007, 18:19

hi friends ,nokia 3120 contact servics ,
1.flash with latest mcu verson,then
2.reball uem.now set is dead ,when try to check with jaf,it says
mcu id error,uem damage,
its my fourth set which is dead after reball uem ,always in 3100/20 sets why its happen to this sets only ,while i reball thousands of sets ,they r working fine,
plz help me

spider-man · 07-27-2007, 18:21

Just make sure that u have Solder correct the UEM

sandeepmtc · 07-27-2007, 18:40

why happen in only these sets only, while i raball,omap,ratu,rap,and others ic ,all these r working fine after reball,

bhuvanele · 07-27-2007, 18:52

hi may b your uem might not b fixed properly, check once again. normally in 3100 cs problem comes due to cpu, not because of uem. next time u check that

sandeepmtc · 07-27-2007, 19:05

Quote:

Originally Posted by bhuvanele

hi may b your uem might not b fixed properly, check once again. normally in 3100 cs problem comes due to cpu, not because of uem. next time u check that

MAN I ALREADY REBALL UPP,AND MANY SETS R SOLVED THROUGHT REBALLING OF UEM , SO I DID IT
THANKS

07-27-2007, 18:19	#1 (permalink)
sandeepmtc Banned Join Date: May 2006 Location: ranchi Posts: 86 Member: 275946 Status: Offline Thanks Meter: 8	nokia 3120 cs,after reball uem set dead hi friends ,nokia 3120 contact servics , 1.flash with latest mcu verson,then 2.reball uem.now set is dead ,when try to check with jaf,it says mcu id error,uem damage, its my fourth set which is dead after reball uem ,always in 3100/20 sets why its happen to this sets only ,while i reball thousands of sets ,they r working fine, plz help me

07-27-2007, 18:40	#3 (permalink)
sandeepmtc Banned Join Date: May 2006 Location: ranchi Posts: 86 Member: 275946 Status: Offline Thanks Meter: 8	yes,1000% perfect reball, why happen in only these sets only, while i raball,omap,ratu,rap,and others ic ,all these r working fine after reball,

07-27-2007, 18:52	#4 (permalink)
bhuvanele Freak Poster Join Date: Feb 2006 Location: India Posts: 459 Member: 237210 Status: Offline Thanks Meter: 90	3100 hi may b your uem might not b fixed properly, check once again. normally in 3100 cs problem comes due to cpu, not because of uem. next time u check that

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOKIA 7210c SUPERNOVA After Flash RM 436 DEAD	gsm_	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	20	04-16-2011 15:52
Nokia 3120 Network Problem	ramdev_mobbile	Nokia Hardware & Hardware Repair	3	07-13-2010 08:46
NOKIA 7210c SUPERNOVA After Flash RM 436 DEAD	gsm_	Nokia Base Band 5 ( BB-5 )	5	01-18-2010 11:58
V9 After Removing Shield Set Dead	alex09494	Motorola Hardware Repair	1	04-06-2008 06:10
Nokia 3120 Killed after replacing UEM	ansari_nazeel	Nokia Digital Core Technology 4 ( DCT-4 )	3	09-04-2006 19:14

07-27-2007, 18:21	#2 (permalink)
spider-man No Life Poster Join Date: Apr 2005 Location: ALGERIA, Tlemcen, Tounane Age: 37 Posts: 4,191 Member: 135039 Status: Offline Thanks Meter: 1,486	Just make sure that u have Solder correct the UEM