Nokia 3410 partiallyDead - GSM-Forum

Fang502001 · 07-14-2003, 06:34

I have 3410, phone was liquid damaged, I reflow board and then do full software update with Knok software. After full flash, I tried to power on phone but only get short blink of lcd and keyboard liths and so on...on and then off. I tried connecting charger, but same resuly, Battery bar just flash on and off, but still no power.

Pls help

Salaams
Ebrahim

AlQuds · 07-14-2003, 12:03

Check if the board is really 3410!

The same problem happens if you flash a 3330 with 3410 software. Because the RAM of 3410 is twice that of 3330.

If it is really 3410 then it might be the RAM chip or connection under it. I think the phone is determining half the RAM size or less.

Fang502001 · 07-14-2003, 12:36

phone is 3410....I will try to replace RAM ic and reload software and then check...oki thnx for reply

Ebrahim

MrHazeem · 07-15-2003, 21:01

before u replace any part try connect it to wintesla and see what error message u have ....

also do u check ccont values ...?

Fang502001 · 07-16-2003, 05:56

Cant connect to Wintesla...phone dont power on...but draws current when connected to power supply..so ccont is working...

07-14-2003, 06:34	#1 (permalink)
Fang502001 Freak Poster Join Date: Dec 2002 Posts: 148 Member: 19003 Status: Offline Thanks Meter: 0	Nokia 3410 partiallyDead I have 3410, phone was liquid damaged, I reflow board and then do full software update with Knok software. After full flash, I tried to power on phone but only get short blink of lcd and keyboard liths and so on...on and then off. I tried connecting charger, but same resuly, Battery bar just flash on and off, but still no power. Pls help Salaams Ebrahim

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted x1 nokia 3310 board & x1 nokia 3410 board	cameraman	Wanted Products	4	09-12-2004 16:11
wanted nokia 3410 and 3310 lcd boards also 3310/3410 batteries	cameraman	Wanted Products	4	09-04-2004 20:31
WinDLS 2.0 versus Nokia 3410	Joseph79	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-25-2002 14:42
Nokia 3410 question	pchelpsi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	09-16-2002 11:38
Nokia 3410 Games !! Please share	PhantomGSM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-17-2002 21:36

07-14-2003, 12:03	#2 (permalink)
AlQuds Insane Poster Join Date: Apr 2002 Location: Denmark Posts: 91 Member: 10692 Status: Offline Thanks Meter: 0	Check if the board is really 3410! The same problem happens if you flash a 3330 with 3410 software. Because the RAM of 3410 is twice that of 3330. If it is really 3410 then it might be the RAM chip or connection under it. I think the phone is determining half the RAM size or less.

07-14-2003, 12:36	#3 (permalink)
Fang502001 Freak Poster Join Date: Dec 2002 Posts: 148 Member: 19003 Status: Offline Thanks Meter: 0	phone is 3410....I will try to replace RAM ic and reload software and then check...oki thnx for reply Ebrahim

07-15-2003, 21:01	#4 (permalink)
MrHazeem Freak Poster Join Date: Jul 2002 Location: MAD Age: 50 Posts: 483 Member: 13545 Status: Offline Thanks Meter: 2	before u replace any part try connect it to wintesla and see what error message u have .... also do u check ccont values ...?

07-16-2003, 05:56	#5 (permalink)
Fang502001 Freak Poster Join Date: Dec 2002 Posts: 148 Member: 19003 Status: Offline Thanks Meter: 0	Cant connect to Wintesla...phone dont power on...but draws current when connected to power supply..so ccont is working...