Nokia 500 dead - Can´t relife it :-(

[Antonio47]

Hello guys

Somebody maybe can help me, beacuse all I know is over.

A nokia 500 is dead, try to flash with highes flash and nothing always the same sh...
I have phoenix,Jaf,Ufs,Cyclone. Now the phone you put power buton and
nothing appears.Baterry is full 100%, cable is orginal and good quality.
I tried to flash more then 25x and nothing.With f-bus phone no booting.
I can flash only with "dead usb".

I think I have kill the phone but somebody knows how to get up the phone.
This is the log:

Software version: 1.2.1
Detected card sn: 611*********
Card version: 01.00
Life counter: 97,28%
Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
CMT Hash : 3AB5DB70B45D23F1ADEEBB5734160706
CMT Hw ID: 400C192103032108
CMT Boot ROM CRC: 2CAC45E2
CMT Secure ROM CRC: 3BC33C8B
CMT Public Id: 0E630000FFFF3C40185C50956452B8160D73A558
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading CMT certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Tony\Mis documentos\Lavarow\Fenix\Backup\Certs\13-05-2012 18-47-28000000030000022600010007400C192103032108-13-05-2012 18-47-28.rpl
Checking software version
Partitioning file: RM-750_010.031_71i92_prd.core.fpsx
Access violation at address 00AFE5F0 in module 'fenix.exe'. Read of address 028C1001
Job's finished with errors!
An error occurred: Communication error
Job's finished with errors!

Thanks for help me !!

[b1988x]

does the phone vibrate when powering on??

[Antonio47]

Hey

No, the phone do nothing. Look to this log from 1 min. ago.
Phoenix with dead usb flash fine but finally finish with error´s.

Fenix Reader SW version: 0.0.2
Connection interface is set to USB now.
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
CMT Hash : 3AB5DB70B45D23F1ADEEBB5734160706
CMT Hw ID: 400C192103032108
CMT Boot ROM CRC: 2CAC45E2
CMT Secure ROM CRC: 3BC33C8B
CMT Public Id: 0E630000FFFF3C40185C50956452B8160D73A558
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading CMT certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Tony\Mis documentos\Lavarow\Fenix\Backup\Certs\13-05-2012 18-47-28000000030000022600010007400C192103032108-13-05-2012 18-47-28.rpl
Checking software version
Partitioning file: RM-750_010.031_71i92_prd.core.fpsx
Access violation at address 00AFE5F0 in module 'fenix.exe'. Read of address 028C1001
Job's finished with errors!
An error occurred: Communication error
Job's finished with errors!
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
CMT Hash : 3AB5DB70B45D23F1ADEEBB5734160706
CMT Hw ID: 400C192103032108
CMT Boot ROM CRC: 2CAC45E2
CMT Secure ROM CRC: 3BC33C8B
CMT Public Id: 0E630000FFFF3C40185C50956452B8160D73A558
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading CMT certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Tony\Mis documentos\Lavarow\Fenix\Backup\Certs\13-05-2012 22-19-31000000030000022600010007400C192103032108-13-05-2012 22-19-31.rpl
Checking software version
Partitioning file: RM-750_010.029_71i92_prd.core.fpsx
Erasing MCUSW Flash area
Erasing CMT area 00040000 - 0007FFFF
Erasing CMT area 000C0000 - 008BFFFF
Erasing CMT area 00DC0000 - 0E97FFFF
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 09F40000 - 0DA7FFFF
Erasing CNT Flash area
Erasing CMT area 008C0000 - 00DBFFFF
Erasing CMT area 0E980000 - 1EFFFFFF
Erasing CMT area 0DA80000 - 0E97FFFF
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending SOS+PMML
Sending SOS+DECOMP
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending GENIO_INIT
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending LDSP
Sending SOS*ISASW
Sending SOS+CORE
Sending SOS+ROFS1
Short delay between flash files
Flashing PPM
Sending SOS+ROFS2
Short delay between flash files
Flashing CNT
Sending SOS*ENO
Flashing additional files
Flashing RM-750_010.029_238.01_default_71i92.2011.35_01.uda.fp sx
Short delay between flash files
Flashing RM-750_010.029_238.01_default_71i92.2011.35_01_prd.ro fs3.fpsx
Sending SOS+ROFS3
Short delay between flash files
Finishing loader session...
Communication error
Job's finished with errors!


Thanks for your help !!

[Mehmood Riaz 1]

you have put only logs here but not mention why you flashed the phone .. what was the condition before flashing .. as far as your logs are concern .. you have error in your flash files .. download fresh files and try again .. if still same then flash it with its product code flash files...

[Antonio47]

Hello

First they bring the phone to flash ppm, has not spanish lenguague.
After flash, the was dead. I try to flash it again with so much diferent´s flash and nothing goes well. I take old flashes and newe´s so highes flash from
rm-750 too and everytime the same error..... ?????

I don´t understand your meaning of this:

if still same then flash it with its product code flash files

Thanks

[b1988x]

Originally Posted by Antonio47

Hello

First they bring the phone to flash ppm, has not spanish lenguague.
After flash, the was dead. I try to flash it again with so much diferent´s flash and nothing goes well. I take old flashes and newe´s so highes flash from
rm-750 too and everytime the same error..... ?????

I don´t understand your meaning of this:

if still same then flash it with its product code flash files

Thanks

u can find the product number under the battery which like 057xxxx

i talk to a friend and he says that he can help.. just be patient and i will replay during the next 24h

[Antonio47]

Originally Posted by b1988x

u can find the product number under the battery which like 057xxxx

i talk to a friend and he says that he can help.. just be patient and i will replay during the next 24h

Thanks my friend downloading flash files.
Will hope that Nokia 500 coming up again.

Thanks

[Mehmood Riaz 1]

Originally Posted by yemeha

hot sale lowest price Refurbished Nokia. free shipping : Nokia shop we declare : the lowest price we sell, is anybody sell lower than us, we will refund you. so welcome:

better to post your add in sale section..

[Antonio47]

NavirmfirmPlus

10.29
10.31
10.32
11.33
111.20.59

Behind the battery is 059h018 I try with 10.29 and 111.20.59

Bad

So I ´am downloading now 10.32 and 11.33, I will pray.If not plz. help.

[b1988x]

hello
i asked my friend and he says u must get rpl backup and then u must use 111 version
and then write the rpl back.

again u must use the 111 version tested 100%

[Antonio47]

Originally Posted by b1988x

hello
i asked my friend and he says u must get rpl backup and then u must use 111 version
and then write the rpl back.

again u must use the 111 version tested 100%

Thanks for your help really !!

I have backup from fenix,ok. I must to look how to put the backup.... sorry.
What´s the meaning of 111 version,don´t understand you,sorry.

If you or your friend have 5 min to explane step by step,please.
If he want I pay him 5 or 10 euros with paypal.

I lost so much time with this Mobile.
Or if better for you, do you know teamviewer ?

Plz. help me !

[b1988x]

ok man
the steps are very easy,
u say that u have different type of software tool u can use them to solve the problem
u just take a backup to protect ur phone if u lose security area.
then download 111.20.59 and flash with it.

i hop then it will solve ur problem..

these steps was tested 100% by mxkey box but ithink jaf is strong and good.

if these steps fail..... try to flash with dead usb mode in jaf or SFI

[Sandino]

Maybe you need to reinstal fenix?
"Access violation at address 00AFE5F0 in module 'fenix.exe'."
And i think that is nod good idea to tray downgrade firmware If you phone not power on you can't read RPL file. You flash it with 10.31, tray same or uppper, in dhe begining not last 111.xxx.
and are you tray to restore certificates (RPL backup from fenix)? Because you have this error "MCU PAPUBKEYS are missing, sending first available block".

[Antonio47]

Hello

Thanks for your help.
I ´am looking how to get or make the rpl....?
When I put with Jaf dead usb and click in - Use ini - I see the flash on my
computer but I can´t get it, it´s the highes flash from 111.20.59 - 059h018.

So are you sure thar Jaf compatible wit this phone?
If a try use ini ( not dead usb ) in the list never are the nokia 500 - rm-750.

I ´am very confused now.

Sorry, but without your help I will not get up this F...... phone.

[b1988x]

im not sure if jaf support this model but i think the S F I flasher which compatible with jaf box is support this model. i will check it and if not support i will reply.