nokia 6020 white lcd - GSM-Forum

ZEBUN · 09-06-2006, 08:59

nokia 6020 lcd is good but when powered on,it is white.lcd is good,it is tested on another phone.any solution?

manyosa · 09-06-2006, 18:57

Erase and reflash it and write pm file.

c_ahmad79 · 09-06-2006, 19:23

only lcd is white............... rest of the phone works.........?
i mean you can recive or dial number...............?

jack81 · 09-06-2006, 19:56

check whether in comming and out going r ok if not try to flash it if not heat uem u will get the problem solved

09-06-2006, 08:59	#1 (permalink)
ZEBUN Freak Poster Join Date: Nov 2004 Age: 63 Posts: 406 Member: 94310 Status: Offline Thanks Meter: 19	nokia 6020 white lcd nokia 6020 lcd is good but when powered on,it is white.lcd is good,it is tested on another phone.any solution?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6670 white lcd	adegome	Nokia Hardware & Hardware Repair	6	11-22-2009 09:41
Nokia 6260 White Lcd After Chang New Balt	.::PATEL TELECOM::.	Nokia Hardware & Hardware Repair	3	02-19-2007 10:40
Nokia 7610 white LCD and nothing else help guys	numobile	WD2 & APE (Symbian Phones)	7	08-17-2006 11:30
Nokia 6111 white lcd but not flex HELP	maniek27	Nokia Digital Core Technology 4 ( DCT-4 )	2	07-06-2006 20:47
Nokia 7610 white LCD and nothing else. Please help	numobile	Nokia Hardware & Hardware Repair	3	06-06-2005 19:27

09-06-2006, 18:57	#2 (permalink)
manyosa No Life Poster Join Date: May 2006 Location: Tanzania Posts: 1,562 Member: 271974 Status: Offline Thanks Meter: 97	Erase and reflash it and write pm file.

09-06-2006, 19:23	#3 (permalink)
c_ahmad79 No Life Poster Join Date: Jan 2006 Location: inside emmc ufs Age: 19 Posts: 7,188 Member: 221603 Status: Offline Sonork: 100.1581270 Thanks Meter: 6,395	only lcd is white............... rest of the phone works.........? i mean you can recive or dial number...............?

09-06-2006, 19:56	#4 (permalink)
jack81 Freak Poster Join Date: Sep 2006 Posts: 253 Member: 344164 Status: Offline Thanks Meter: 22	check whether in comming and out going r ok if not try to flash it if not heat uem u will get the problem solved