nokia 6500-slide keypad problem - GSM-Forum

djems · 03-23-2009, 11:52

Please help repair keypad problem.Working only power buton on/off .With HWK SELF TEST ST_KEYBOARD_STUCK_TEST -failed.

xEDIx · 03-23-2009, 14:04

mr try clean or change flexibell keyboard n keypad ic

galant2 · 03-23-2009, 16:23

Quote:

Originally Posted by djems

Please help repair keypad problem.Working only power buton on/off .With HWK SELF TEST ST_KEYBOARD_STUCK_TEST -failed.

genci titi 2002 · 03-23-2009, 16:25

Quote:

Originally Posted by djems

Please help repair keypad problem.Working only power buton on/off .With HWK SELF TEST ST_KEYBOARD_STUCK_TEST -failed.

change the keypad ic 6500 have 2 keypad ic

elnursoft1 · 05-23-2009, 14:20

i have 6500s keypad not working 2.5.8.0 and left right.

akifable · 06-06-2009, 11:11

if only work on-off button ,means: some keys going work-sticky, and you can try once : down keypad ic chancing.

ace_venturia · 06-06-2009, 11:22

also check the volume key IC near the volume keys
i've found the ICs defective for keypad not work in 6500s

Kruscher · 08-30-2009, 16:15

Hi. "ace_venturia" is right! In my case these two crystals were defective. Thanks

dulalsyl0077 · 02-14-2010, 16:33

nokia 6500s volume key problem solution

temp_temp · 02-24-2010, 11:40

same problem here
only ON button is working and not powering off the mobile
both key pad IC's are changed
any help ????

i am the master · 03-02-2010, 20:22

hello i have one 6500slide key pad problem i change the flex and i changed both key pad ic's but phone is still stock on start up phone without sim card and i can not select anything any solution for this thank you Rash

i am the master · 03-02-2010, 20:24

did you change the flex or not

djems · 03-05-2010, 08:44

Very thanks for all .Problem is flex cable.

dez com · 03-05-2010, 11:10

hello i have the display problem change the flex cable still samproblem need chema for display ic 6500S slid

dhanesh · 04-30-2010, 07:41

Change both keypad ic..........if not ok,then check circuit...

03-23-2009, 11:52	#1 (permalink)
djems Insane Poster Join Date: Oct 2005 Location: UK Posts: 92 Member: 195065 Status: Offline Thanks Meter: 11	nokia 6500-slide keypad problem Please help repair keypad problem.Working only power buton on/off .With HWK SELF TEST ST_KEYBOARD_STUCK_TEST -failed.

06-06-2009, 11:11	#6 (permalink)
akifable Major Poster Join Date: Oct 2005 Age: 41 Posts: 48 Member: 186423 Status: Offline Thanks Meter: 24	down key ic if only work on-off button ,means: some keys going work-sticky, and you can try once : down keypad ic chancing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 6500s-1 keypad problem	nkakanou	Nokia Hardware & Hardware Repair	4	06-20-2012 08:33
Nokia 6500 slide keypad (*,0,#) Not working	Unique_ah	Nokia Hardware & Hardware Repair	8	08-10-2011 17:49
6500 slide keypad problem	lijgeorge	Nokia Hardware & Hardware Repair	13	04-27-2010 07:36
6500 slide keypad problem	lijgeorge	Nokia Hardware & Hardware Repair	4	02-07-2009 06:59

03-23-2009, 14:04	#2 (permalink)
xEDIx Registered User Join Date: Aug 2008 Location: Indonesia Posts: 196 Member: 828691 Status: Offline Thanks Meter: 33	mr try clean or change flexibell keyboard n keypad ic

05-23-2009, 14:20	#5 (permalink)
elnursoft1 Junior Member Join Date: Jun 2006 Posts: 1 Member: 300361 Status: Offline Thanks Meter: 4	i have 6500s keypad not working 2.5.8.0 and left right.

08-30-2009, 16:15	#8 (permalink)
Kruscher Insane Poster Join Date: Sep 2007 Posts: 61 Member: 598721 Status: Offline Thanks Meter: 35	Hi. "ace_venturia" is right! In my case these two crystals were defective. Thanks

02-14-2010, 16:33	#9 (permalink)
dulalsyl0077 Junior Member Join Date: May 2009 Posts: 5 Member: 1041698 Status: Offline Thanks Meter: 4	nokia 6500s volume key problem solution

02-24-2010, 11:40	#10 (permalink)
temp_temp No Life Poster Join Date: Aug 2007 Location: Algérie Age: 43 Posts: 1,522 Member: 570252 Status: Offline Thanks Meter: 207	same problem here only ON button is working and not powering off the mobile both key pad IC's are changed any help ????

03-02-2010, 20:22	#11 (permalink)
i am the master Freak Poster Join Date: Mar 2009 Location: uk Posts: 159 Member: 996052 Status: Offline Thanks Meter: 35	hello i have one 6500slide key pad problem i change the flex and i changed both key pad ic's but phone is still stock on start up phone without sim card and i can not select anything any solution for this thank you Rash

03-02-2010, 20:24	#12 (permalink)
i am the master Freak Poster Join Date: Mar 2009 Location: uk Posts: 159 Member: 996052 Status: Offline Thanks Meter: 35	did you change the flex or not

03-05-2010, 08:44	#13 (permalink)
djems Insane Poster Join Date: Oct 2005 Location: UK Posts: 92 Member: 195065 Status: Offline Thanks Meter: 11	Very thanks for all .Problem is flex cable.

03-05-2010, 11:10	#14 (permalink)
dez com No Life Poster Join Date: Jun 2007 Location: gsm word Posts: 707 Member: 525901 Status: Offline Sonork: 100.1607503 Thanks Meter: 47	hello i have the display problem change the flex cable still samproblem need chema for display ic 6500S slid

04-30-2010, 07:41	#15 (permalink)
dhanesh Freak Poster Join Date: Aug 2005 Location: india Posts: 147 Member: 169323 Status: Offline Thanks Meter: 28	Change both keypad ic..........if not ok,then check circuit...