Nokia 7210. Signal Drop.. Water Damage?? - GSM-Forum

DrMobile · 08-31-2004, 08:43

I receive many 7210 with Signal drop problem.. PA don't work..
But I am not able to repair it.

All those phones was water demage.

I think there is some Track breaked.

anyone have idea.

PA is oK.

Best Regards,
Wahab

merulez29 · 08-31-2004, 14:07

Hi sir!...
Is ur heat regulated?... too much heat applied damages d PA. and also if PA is ok try to reheat Helga.

Hope it helps...

KRIZA · 08-31-2004, 18:47

Me olso have this probl whit one 7210. Phone is wos mechanickly damaged.
So signal disopire in 5seconds when power on the phone, Pa is ok 100% because
i can kip network and coll when i push phone somehaw, so that means some
LINES are broken in rf part-but can find. Olso i chek ant swich ok. Rebol uem vpp to.

keany · 09-01-2004, 11:05

@dr mobile
i dont know if you have resolve this problem or not ? or if you want my help or not .
but i dont know you have test it and the tx is missing (becouse you have say that pa is ok but pa is out of functions (as i mean)
the help that i will give to you is that send a picture of the lines of pa in network and you will test the lines one bye one if they are ok .
i dont know you have thesse information of the lpa lines of 7210???
if not say me and i will send to you
best regards keany

KRIZA · 09-01-2004, 11:42

Helo Keny can you post here schematic of the lpa lines.? Because i hawe some
brocken track in rf part.

Destructor · 09-02-2004, 08:17

yes please post shematics to me,I have this problem

08-31-2004, 08:43	#1 (permalink)
DrMobile No Life Poster Join Date: Aug 2001 Location: P A K I S T A N _____________ Age: 40 Posts: 3,579 Member: 5932 Status: Offline Thanks Meter: 1,694	Nokia 7210. Signal Drop.. Water Damage?? I receive many 7210 with Signal drop problem.. PA don't work.. But I am not able to repair it. All those phones was water demage. I think there is some Track breaked. anyone have idea. PA is oK. Best Regards, Wahab

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 7610 signal drop plz help	graceful2	Nokia Hardware & Hardware Repair	2	03-03-2009 14:45
Nokia 6030 Signal drop and power off after few second	Munir Memon	Universalbox	3	07-21-2008 11:42
C-975 Signal Problem Water Damage.....?????help Me.....	MUNEEB_AKHTAR_RAZA	Motorola Hardware Repair	1	10-29-2007 09:57
Nokia 6610 signal drop	.:::Dr. Cell:::.	Nokia Hardware & Hardware Repair	9	01-15-2005 17:51
Nokia 3330 signal drops to zero	jeanfleur	Nokia Hardware & Hardware Repair	8	02-15-2004 14:20

08-31-2004, 14:07	#2 (permalink)
merulez29 Freak Poster Join Date: Apr 2004 Location: Fahad Al Salem, Kuwait Age: 42 Posts: 176 Member: 63385 Status: Offline Thanks Meter: 3	Hi sir!... Is ur heat regulated?... too much heat applied damages d PA. and also if PA is ok try to reheat Helga. Hope it helps...

08-31-2004, 18:47	#3 (permalink)
KRIZA No Life Poster Join Date: Dec 2003 Location: BiH Age: 49 Posts: 583 Member: 46341 Status: Offline Thanks Meter: 15	Me olso have this probl whit one 7210. Phone is wos mechanickly damaged. So signal disopire in 5seconds when power on the phone, Pa is ok 100% because i can kip network and coll when i push phone somehaw, so that means some LINES are broken in rf part-but can find. Olso i chek ant swich ok. Rebol uem vpp to.

09-01-2004, 11:05	#4 (permalink)
keany No Life Poster Join Date: May 2004 Location: gsm-land Age: 44 Posts: 755 Member: 67419 Status: Offline Thanks Meter: 237	@dr mobile i dont know if you have resolve this problem or not ? or if you want my help or not . but i dont know you have test it and the tx is missing (becouse you have say that pa is ok but pa is out of functions (as i mean) the help that i will give to you is that send a picture of the lines of pa in network and you will test the lines one bye one if they are ok . i dont know you have thesse information of the lpa lines of 7210??? if not say me and i will send to you best regards keany

09-01-2004, 11:42	#5 (permalink)
KRIZA No Life Poster Join Date: Dec 2003 Location: BiH Age: 49 Posts: 583 Member: 46341 Status: Offline Thanks Meter: 15	Helo Keny can you post here schematic of the lpa lines.? Because i hawe some brocken track in rf part.

09-02-2004, 08:17	#6 (permalink)
Destructor No Life Poster Join Date: Apr 2003 Location: Crazy House Age: 41 Posts: 683 Member: 27606 Status: Offline Thanks Meter: 15	yes please post shematics to me,I have this problem