Nokia asha 200 hang
 

my nokia asha 200 hang problom i also update the phone but no response any body help me plz

thanks:)

just small heat on flash ic...

rehot cpu set 10000% ok i tested it

just change lcd 120% ok

i also have a nokia asha 200.
I've done firmware upgrade/downgrade and still the same problem
hows that?

Nokia asha 200 hangs
 

Backup d memory card,then format the memory card,then scan the backup files for any form of virus,then insert d files back to the memory card,insert it to the phone and check it,it will work fine

NO Bro this problem Hardware ..100% i Tested change Clack IC 1000%

post tested solution who have done with own hand solution only....

Asha 200 Softwear ok But Mobiles hang probelm solved
 

NO Bro this problem Hardware ..100% i Tested change Clack IC 1000%

replay most bro [email protected] +923002226088

from where i get clack ic

U get any one mobiles in NOKIA Caock IC

it only works 4 a while after changing clock ic. is there any permanent solution? i'm desperate for this solution. thanks

bro flash ic small heat 100000000000000%%%%%%%

i need a view of flash ic cos i cant figure which is flash ic

Sometime software, try this first.
http://forum.gsmhosting.com/vbb/8919604-post6.html

Nokia asha 200 hanging solve thank u so much Fahad Ali khan your post 100% i tested 100% working

what is Caock IC?............................................... ................

rehote cpu or ok
thanks bro

bro big problem pound with that case,asha 200 mal function with cpu ic,many time the same problem sucses only rehot or replace cpu ic,good work bro

asha 200 hang problem done 100%
 

just reheat flash ic ur problem will be solved
thanks

hi...junior member are u joke.....hahahahahahha
u solution very simple.......this hardware problem rehot Cpu only Cpu,slowly and easy many time solved with this trik

just mild reheat the flash ic

just hardwere problem

rehoot cpu 1000% will work

its 99% software problam the re hote the cpu......

its also a hardware problem i research this metter for a long period but some cells become ok and mostly become dead or same faulty position.
one more way is that u fully flash the cell with latest version and after full flash u format the cell and also restore factory it.
because hanging problem is occured by multimedia components.
u dont use your camra and themes and videos. your cell dont become hang.
and if cell makes error during flash dont worry. u keep your cell in off position and discharge bettey also (4 to 5 hours)
and then flash it. i sure no any error occured and cell make full flash.
in sha Allah

Re-hot flash ic only i try it it work 10000%

replay most bro [email protected] +923002226088

Fahad bahi where is clock i c please please chare me
change Clock IC?????????????
[email protected]

Bro where is the clack ic in pcb pls help :(

this problem cames from software sometime also from hardware . so try to full flash d unit first with latest firmware . if not solve then proceed to hardware repair.

first try to remove d two marked chipcaps then check , if same replace B3000 (32.768Mhz clock crystal) .
if still same replace B7100 (26Mhz clock crystal) then check .

if again still same problem try to reball or replace cpu .

post result

rehot cpu tested for me.......

@fahad ali khan ,

don't edit my posted picture . I advice u to post ur's one !!

@ all ,
who have hang problem , check my above posted solution & reply here .

rehot flash ic only no hit cpu 10000% ok i tested it shujahmobile gujrat pk

refelow upp.............................

asha 200 hang problem change Clock crystal 100%
 

thank u so much mr Fahad Ali khan my problem solves 100% ok solution

My asha 200 has display problems it does show graphics
Just white.

where i can find clock crystal ??
thx

asa 200 led lcd help.....

i try this set ok .

I have same problem but i'm not luck after change clock...sombdy have the other solution ?? please....

Changing clock IC will correct the fault if the clock crystal was bad, but in the case of those who were not lucky to get their phones back in good shape after change of clock crystal, the most likely cause is the power management IC or UEM (Universal Energy Module). I'm afraid you need to change in a new one for the mobile to live the rest of its life in peace.

what is clack ic i dont understand

tested for me 4x hang up asha 200..only crystal clock ic change only..

thanks re hot flash ic ok00000000000

I need image for clack IC nokia asha 200