nokia3500 dead problem - GSM-Forum

ruder · 09-16-2008, 21:07

nokia3500 water damage set, i heat the complette board but problem is same,how could i on my set

ruder · 09-29-2008, 21:57

i repeat the quistion,its a water damage set i heat the complette the board and clean it but not response,jumper ,track problem,change or remove the parts,what can i do plz help me with image

**.:SARCAR:.** · 09-30-2008, 11:14

have you check your set with jaf ? please post here log

amol_sm · 10-01-2008, 14:23

1) Clean the board with Elma
2) Reflow the whole board properly
3) If still dead try to connect the phone to the Box
4) Start to phone for flashing......

Post result.

Byte · 10-01-2008, 18:00

if u want to take my advise, forget any water damaged phone!

----
Byte

09-16-2008, 21:07	#1 (permalink)
ruder Junior Member Join Date: Aug 2008 Posts: 15 Member: 843146 Status: Offline Thanks Meter: 11	nokia3500 dead problem nokia3500 water damage set, i heat the complette board but problem is same,how could i on my set

09-29-2008, 21:57	#2 (permalink)
ruder Junior Member Join Date: Aug 2008 Posts: 15 Member: 843146 Status: Offline Thanks Meter: 11	3500 dead problem i repeat the quistion,its a water damage set i heat the complette the board and clean it but not response,jumper ,track problem,change or remove the parts,what can i do plz help me with image

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W550 - Dead - Problems	mobilextreme	Cruiser Suite	5	09-20-2006 23:27
7610 dead probleme plz help....	faisi	Nokia Hardware & Hardware Repair	2	11-29-2005 07:26
A65 dead problem	--==Dixon==--	E-Gold Based Phones	4	02-23-2005 12:38
T180 - dead - problem with testpoint	tozitom	Motorola Old Legacy (EMMI)	0	04-08-2004 19:49
alcatel 3xx dead problem !!! pls help!!!	gsm-lord	Alcatel TCL Hardware Repair	6	11-13-2001 20:37

09-30-2008, 11:14	#3 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	have you check your set with jaf ? please post here log

10-01-2008, 14:23	#4 (permalink)
amol_sm No Life Poster Join Date: Sep 2006 Posts: 2,929 Member: 343326 Status: Offline Thanks Meter: 1,463	1) Clean the board with Elma 2) Reflow the whole board properly 3) If still dead try to connect the phone to the Box 4) Start to phone for flashing...... Post result.

10-01-2008, 18:00	#5 (permalink)
Byte Registered User Join Date: Sep 2003 Location: Palestine Age: 50 Posts: 1,951 Member: 39208 Status: Offline Thanks Meter: 152	if u want to take my advise, forget any water damaged phone! ---- Byte