PKD-1 really need,for all serious people? - GSM-Forum

gsmsalers · 01-17-2003, 16:56

Hello.
Dear members.
I have just 1 question about nokia wintesla and pheonix pkd-1 lpt dongle. I worked with cracked wintesla last 2 years. With it I can make self diagnose for contact service and can diagnose most network problemms by rssi level reading methode by Willy. Now I planning to buy original pkd-1 dongle.
Give me advice:
1.after I buy that ltp dongle original wintesla (not cracked) can give me more accurate diagnostic and can find faulty units by software. Find faulty hagar or cobba,pa faulty etc...
2. Or repair and calibrate network loosing and energy faults (not charging...) without opening phone? If network is 2,3 bar then make it 3,4 bars,without opening phone?
3. Or need more tools? Test jig etc..?
If no difference with cracked one, I doesn't wanna to buy that dongle for original wintesla.
Thanks for attention.

Luciano · 01-17-2003, 17:11

- for calibrate Network TX,RX you need an GSM tester + cables
- for calibrate Energy managment (Charging) you need an Service Battery and power + cables
- for diagnostic & repair you will need JIG + cables.

I did not tried to use all of this with cracking wintesla because I use PKD but you can't do any of this with PKD-1 only.

Save you'r money if you'r happy now and save it for by service HW tools..

gsmsalers · 01-18-2003, 13:56

Hi.
I can buy all this gsmtester and service bat...
At last if I buy pkd-1 then it really make if my phone network is 2,3 bar then make it to 3,4 bars without reflowing or changing any ic like pa,cobba etc.... by software?

01-17-2003, 16:56	#1 (permalink)
gsmsalers No Life Poster Join Date: Apr 2002 Location: Flash Age: 44 Posts: 1,943 Member: 11208 Status: Offline Thanks Meter: 11	PKD-1 really need,for all serious people? Hello. Dear members. I have just 1 question about nokia wintesla and pheonix pkd-1 lpt dongle. I worked with cracked wintesla last 2 years. With it I can make self diagnose for contact service and can diagnose most network problemms by rssi level reading methode by Willy. Now I planning to buy original pkd-1 dongle. Give me advice: 1.after I buy that ltp dongle original wintesla (not cracked) can give me more accurate diagnostic and can find faulty units by software. Find faulty hagar or cobba,pa faulty etc... 2. Or repair and calibrate network loosing and energy faults (not charging...) without opening phone? If network is 2,3 bar then make it 3,4 bars,without opening phone? 3. Or need more tools? Test jig etc..? If no difference with cracked one, I doesn't wanna to buy that dongle for original wintesla. Thanks for attention. Last edited by gsmsalers; 01-17-2003 at 17:05.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
for all hackers people i need very help	beni b	GSM Programming & Reverse Engineering	2	11-10-2007 17:31
for all tunisia people port 9999 closed for multibox	Chawkiz_gsm	Multi-Box	55	01-23-2007 17:32
User manual for SMART MOTO/ SMART CLIP for all Romanian peoples here:	alfamobilTEAM	Smart-Clip	0	01-21-2006 15:40
I have PKD-1 but need full version of Wintesla / files for all DCT-3 phones please ;)	STB Trading	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-12-2002 11:33
Important For All Serious Members!!!!	Pandemonio100	The Market Feed Back	13	08-06-2002 19:05

01-17-2003, 17:11	#2 (permalink)
Luciano Freak Poster Join Date: Aug 2001 Location: RO Posts: 479 Member: 5992 Status: Offline Thanks Meter: 1	- for calibrate Network TX,RX you need an GSM tester + cables - for calibrate Energy managment (Charging) you need an Service Battery and power + cables - for diagnostic & repair you will need JIG + cables. I did not tried to use all of this with cracking wintesla because I use PKD but you can't do any of this with PKD-1 only. Save you'r money if you'r happy now and save it for by service HW tools..

01-18-2003, 13:56	#3 (permalink)
gsmsalers No Life Poster Join Date: Apr 2002 Location: Flash Age: 44 Posts: 1,943 Member: 11208 Status: Offline Thanks Meter: 11	Hi. I can buy all this gsmtester and service bat... At last if I buy pkd-1 then it really make if my phone network is 2,3 bar then make it to 3,4 bars without reflowing or changing any ic like pa,cobba etc.... by software?