please help in 7210 - GSM-Forum

moga_phone · 01-31-2007, 21:27

i have 3 7210 make the same error

1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x01FFFFFF,7D58B61A,
Algorithm: u_intel.fia, Ver: 4.55.0
Algorithm Ok, MSID: 84812E398C45835407EAD856C9
Decoded MSID: 38E9BAE9-005B035E-A9000000
Encoded FAID: 8E87FEF2-D7CE7453-113B367C
Erasing: 0x01000000-0x0100FFFF ...
Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00
Process Failed, Repowering Mobile

HUM · 02-01-2007, 00:24

first resold upp,if not then resold flash ic,hope ur problem solved....goodluck!

imran hafeez · 02-01-2007, 14:23

reinstal ur software setup exe

and then try to flash ur phone

sulai2k · 02-02-2007, 16:41

u reball or change flash ic 100% ok

lahoot · 02-02-2007, 17:22

just resold flash ic,it will 100% don

Anand madaan · 02-02-2007, 17:27

reboll upp & flash ic only....................

ashre salama · 02-02-2007, 19:11

pleas tel us the result

6110 · 02-02-2007, 20:44

sir i solve this problem with jaf if u dont mind then trye flash with jaf hoop your problem will slove

capri · 02-02-2007, 21:24

Hmmmm.......nice work

Prajith · 02-03-2007, 00:25

1. Flash the phone with any software with latest suite
2. Check the Cable and the pads on the board
3. Pls hold the cable to the board strongly until flash finish
4. If same problem results again and again check hardware
5. Most Probably UPP (cpu) Dry prolem.Rework it and try again software
6.If not Ok rework Flash Ic try soft
7. Same result reball upp try,if same reball flash try

I solved the same problem in Thoosands of phones.

Prajith
[email protected].

chphoa · 02-03-2007, 06:52

if u belive me,
u try reball or change ur flash IC
its flash IC problem.....99%

**.:SARCAR:.** · 02-03-2007, 19:11

yes problem is in flash ic , reball or change it with new one

post result

obz · 02-04-2007, 09:16

try to remove your ufs suite then reinstall your ufs suite again this will solve your problem...............good luck

.:KHALIFA:. · 02-04-2007, 18:40

lots of good advices....
members working hard.
good .....

cdmababa · 02-04-2007, 22:02

Erasing Error: 10, at: 0x01000000-0x0100FFFF IT MEENS FLASH IC DEMEGED OR DRY SOLDER BUT SOME TIME THIS PROMLEM SLOVE WITHOUT ANY HARDWARE CHANGE JUST UNINSTAL UFS SUTE AND REINSTAL OR TRY OTHER FLASHER
MOSTLY PROBLEM FLASH IC

01-31-2007, 21:27	#1 (permalink)
moga_phone Junior Member Join Date: Sep 2006 Location: egypt Posts: 6 Member: 350807 Status: Offline Thanks Meter: 0	please help in 7210 i have 3 7210 make the same error 1st Boot Ok, DCT4, UPP: 1120 Fl0: 0x01000000-0x01FFFFFF,7D58B61A, Algorithm: u_intel.fia, Ver: 4.55.0 Algorithm Ok, MSID: 84812E398C45835407EAD856C9 Decoded MSID: 38E9BAE9-005B035E-A9000000 Encoded FAID: 8E87FEF2-D7CE7453-113B367C Erasing: 0x01000000-0x0100FFFF ... Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00 Process Failed, Repowering Mobile

02-02-2007, 17:27	#6 (permalink)
Anand madaan Insane Poster Join Date: Jul 2004 Age: 47 Posts: 85 Member: 71309 Status: Offline Thanks Meter: 5	7210 prob........... reboll upp & flash ic only....................

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cyclone team please help with 7210 contact service	Jiminay2000	Cyclonebox	6	02-08-2010 16:37
Please Help Me 7210s can,t unlock with latest version Maxkey	swechacnu	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	7	09-12-2009 15:26
help in 7210	goga3000	Nokia Digital Core Technology 4 ( DCT-4 )	0	06-26-2004 01:18
PLEASE HELP! NOkia 7210 PLEASE!	spictacular	Nokia Digital Core Technology 4 ( DCT-4 )	12	03-13-2004 00:17
please help with 7210 & 7250 imei change	nipesh	Nokia Digital Core Technology 4 ( DCT-4 )	2	04-29-2003 01:41

02-01-2007, 00:24	#2 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	first resold upp,if not then resold flash ic,hope ur problem solved....goodluck!

02-01-2007, 14:23	#3 (permalink)
imran hafeez Registered User Join Date: Jun 2004 Age: 48 Posts: 69 Member: 69042 Status: Offline Thanks Meter: 3	reinstal ur software setup exe and then try to flash ur phone

02-02-2007, 16:41	#4 (permalink)
sulai2k Freak Poster Join Date: Jul 2006 Posts: 420 Member: 311025 Status: Offline Sonork: 100.1607375 Thanks Meter: 171	u reball or change flash ic 100% ok

02-02-2007, 17:22	#5 (permalink)
lahoot No Life Poster Join Date: Feb 2006 Location: In Heavan Posts: 1,056 Member: 229987 Status: Offline Sonork: 100.1602834 Thanks Meter: 193	just resold flash ic,it will 100% don

02-02-2007, 19:11	#7 (permalink)
ashre salama Crazy Poster Join Date: Jan 2006 Posts: 58 Member: 224502 Status: Offline Thanks Meter: 2	pleas tel us the result

02-02-2007, 20:44	#8 (permalink)
6110 Insane Poster Join Date: Dec 2006 Location: Pakistan(Lahore) Age: 38 Posts: 88 Member: 403718 Status: Offline Thanks Meter: 14	sir i solve this problem with jaf if u dont mind then trye flash with jaf hoop your problem will slove

02-02-2007, 21:24	#9 (permalink)
capri No Life Poster Join Date: Nov 2006 Location: Philippines - Saudi Arabia Posts: 539 Member: 396326 Status: Offline Thanks Meter: 229	Hmmmm.......nice work

02-03-2007, 00:25	#10 (permalink)
Prajith Freak Poster Join Date: Feb 2006 Location: Get Closer with Mobile Age: 44 Posts: 398 Member: 228358 Status: Offline Thanks Meter: 32	1. Flash the phone with any software with latest suite 2. Check the Cable and the pads on the board 3. Pls hold the cable to the board strongly until flash finish 4. If same problem results again and again check hardware 5. Most Probably UPP (cpu) Dry prolem.Rework it and try again software 6.If not Ok rework Flash Ic try soft 7. Same result reball upp try,if same reball flash try I solved the same problem in Thoosands of phones. Prajith [email protected].

02-03-2007, 06:52	#11 (permalink)
chphoa Junior Member Join Date: Jul 2006 Posts: 34 Member: 319957 Status: Offline Thanks Meter: 3	if u belive me, u try reball or change ur flash IC its flash IC problem.....99%

02-03-2007, 19:11	#12 (permalink)
.:SARCAR:. Moderator Join Date: Jul 2006 Location: Midnapore,West-Bengal,India Posts: 5,402 Member: 322206 Status: Offline Sonork: 100.1594813/.:SARCAR:. Thanks Meter: 1,350	yes problem is in flash ic , reball or change it with new one post result

02-04-2007, 09:16	#13 (permalink)
obz Junior Member Join Date: Nov 2006 Posts: 7 Member: 389628 Status: Offline Thanks Meter: 0	try to remove your ufs suite then reinstall your ufs suite again this will solve your problem...............good luck

02-04-2007, 18:40	#14 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	lots of good advices.... members working hard. good .....

02-04-2007, 22:02	#15 (permalink)
cdmababa Freak Poster Join Date: Mar 2006 Location: MobileCorner™ Posts: 204 Member: 245169 Status: Offline Sonork: 100.1652602:baba Thanks Meter: 36	Erasing Error: 10, at: 0x01000000-0x0100FFFF IT MEENS FLASH IC DEMEGED OR DRY SOLDER BUT SOME TIME THIS PROMLEM SLOVE WITHOUT ANY HARDWARE CHANGE JUST UNINSTAL UFS SUTE AND REINSTAL OR TRY OTHER FLASHER MOSTLY PROBLEM FLASH IC