Post me all your 3100 & 6600 problems...!

[abhi01]

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,002088C0,St M28W640
Fl1: 0x02000000-0x027FFFFF,002088C0,St M28W640
Fl2: 0x04000000-0x047FFFFF,002088C0,St M28W640
Fl3: 0x06000000-0x067FFFFF,002088C0,St M28W640
Algorithm: w3_st_i.fia, w3_cbusb.fia, Ver: 4.52.0
Algorithm Ok, MSID: 841922DDED0D9D74ECD930D267
Decoded MSID: 3E4EBAF7-00D8C503-A8000000
Encoded FAID: A3619400-9601CBA6-FAAF56F2
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02000000-0x0214FFFF Erased, Time: 00:10
Write Error: hDat 14, at: 0x02100000:08
Process Failed, Repowering Mobile

[..:MumbaiGsm:..]

Check cable, flash points on board...
connection problem..

[sakthivel]

i need 3120 on/off ways the on/off switch contacts on the board is removed please helpme

[r a nadeem]

Originally Posted by sakthivel

i need 3120 on/off ways the on/off switch contacts on the board is removed please helpme

dear br ,
make jamper like pic , ur fone will be ok , post result

[sameh_safa]

Originally Posted by r a nadeem

i have 3100 , there is no sound in earpiece

change the earpice frist if the same problem check the double resistance in the other side of the board appear in the picture

[sameh_safa]

Originally Posted by skd_123

3100 imei ????????????? can u help me how i repair it

change uem and write a rpl with a new imei

[sree krishna]

i need 3100 display ways please help me

[bong echavez84]

pls locate the cimcard ic pls post picture

[baraka42]

Originally Posted by sree krishna

i need 3100 display ways please help me

pls. search befor ask.

here is 6100 display way pic. it same for 3100 display way.

http://forum.gsmhosting.com/vbb/show...45&postcount=6

wbr

[baraka42]

Originally Posted by bong echavez84

pls locate the cimcard ic pls post picture

pls. search befor ask.

for what model pic. you want ?

wbr.

[travolta]

Originally Posted by khem

NO NETWORK - CONTACT SERVICE / RETAILER - POWER FAILURE - WHITE SCREEN - NOT CHARGING - POWER NOT STORING - ETC............................................... .................................................. .................................................. ..DN`T HESITATE POST HERE PLZ.....I`ll try to reply you shortly in less than 12hours!.......................................... .................................................. ....;O)........................................... .................................................. .................................................. .................................................. .................................................. .................................................. ..BIG thnks to GSM FORUM

hi,i have this problem and solved with jumper solution and it work ok,but it went back to the same fault after some time and when i look cl0oser,my jumper are still ok but R103 is broken off and i have no replacement,plsssssssssssss can you give me jumper solution if you think it can cause my problem?

[sameh_safa]

Originally Posted by sree krishna

i need 3100 display ways please help me

take the picture below it will help you man

[sameh_safa]

Originally Posted by bong echavez84

pls locate the cimcard ic pls post picture

the solution in the picture man

[aakif_nab]

Originally Posted by zalvahe

how can i repair n3100 ? no tones and lcd blinking. tones i replace new buzzer and i juper still no tones?????? lcd blinking reheat uem still blinking and replace lcd still blinking??????

re**** upp display blink is upp problem i have solved the same prob. by re**** upp

Good luk

[travolta]

Originally Posted by travolta

hi,i have this problem and solved with jumper solution and it work ok,but it went back to the same fault after some time and when i look cl0oser,my jumper are still ok but R103 is broken off and i have no replacement,plsssssssssssss can you give me jumper solution if you think it can cause my problem?

hi pal,i thought you said you will help within short time,still waiting for your assistance urgently needed,tanz.