Urgent!! nok 7250i CAM problem after water damage - GSM-Forum

toster1984 · 10-15-2004, 17:27

hi all,have a nok 7250i repaired after a water damage,all work's fine,only when i try to make any foto,says "operation fail" and then "camera on stand by". what can i do for solve this?

note: i've cleaned the cam connectors,but no result,the board looks fine,not any visible fisical damage.

Please,help me,it's urgent. a BIG thanks in advance

DMD · 10-15-2004, 17:45

Hi your problem is one of three things

1: UPP
2: Hardware accelerator
3: Camera Module

Regards D.

willy · 10-15-2004, 18:29

measure VCAM and VFLASH voltage 1.8V and 2.8V !
mostly look like line cut !

bengkel_hp · 10-16-2004, 19:28

just only check vflash2 from C372 to C980, if broken only jumper it 100% work

willy · 10-16-2004, 19:47

or ,, change board

!
water damaged phone,,, never stop give you problem !

and more,, what mean "URGENT" ??

Willy

SRNOURI · 10-16-2004, 22:16

Hi
Try this link . maybe help u
http://forum.gsmhosting.com/vbb/showthread.php?t=122421

10-15-2004, 17:27	#1 (permalink)
toster1984 Junior Member Join Date: Apr 2004 Age: 39 Posts: 17 Member: 63217 Status: Offline Thanks Meter: 0	Urgent!! nok 7250i CAM problem after water damage hi all,have a nok 7250i repaired after a water damage,all work's fine,only when i try to make any foto,says "operation fail" and then "camera on stand by". what can i do for solve this? note: i've cleaned the cam connectors,but no result,the board looks fine,not any visible fisical damage. Please,help me,it's urgent. a BIG thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n95 keypad problem after water damage	GSMhonest	Nokia Hardware & Hardware Repair	0	08-02-2008 09:02
T310 after water damage problem	florinmar	Sony Ericsson Hardware Repair	4	10-25-2004 10:16
c30 can't charge after water damaged.	hooi76	Hardware Repair by brands	0	03-20-2002 13:16
Nokia 3310 Can't On After Water Damage	Williamcwy	Nokia Hardware & Hardware Repair	3	02-04-2002 06:26
V.50 not charging after water damage	bluelights	Motorola Old Legacy (EMMI)	0	01-07-2002 18:25

10-15-2004, 17:45	#2 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	Hi your problem is one of three things 1: UPP 2: Hardware accelerator 3: Camera Module Regards D.

10-15-2004, 18:29	#3 (permalink)
willy No Life Poster Join Date: Mar 2000 Location: inside NOKIA phone Age: 58 Posts: 1,677 Member: 1060 Status: Offline Thanks Meter: 10	measure VCAM and VFLASH voltage 1.8V and 2.8V ! mostly look like line cut !

10-16-2004, 19:28	#4 (permalink)
bengkel_hp Freak Poster Join Date: Jun 2004 Age: 47 Posts: 240 Member: 68021 Status: Offline Thanks Meter: 11	just only check vflash2 from C372 to C980, if broken only jumper it 100% work

10-16-2004, 19:47	#5 (permalink)
willy No Life Poster Join Date: Mar 2000 Location: inside NOKIA phone Age: 58 Posts: 1,677 Member: 1060 Status: Offline Thanks Meter: 10	or ,, change board ! water damaged phone,,, never stop give you problem ! and more,, what mean "URGENT" ?? Willy

10-16-2004, 22:16	#6 (permalink)
SRNOURI Freak Poster Join Date: May 2003 Age: 48 Posts: 338 Member: 29870 Status: Offline Thanks Meter: 24	Hi Try this link . maybe help u http://forum.gsmhosting.com/vbb/showthread.php?t=122421