who will teach? - GSM-Forum

fiZ · 07-01-2002, 13:35

Nokia 3210: NOT CHARGING!

who can will teach,how to repair this problem in details

*** for you

mr_x4you · 07-01-2002, 15:59

look at battery conectors on board ! Watch what happens when you press them with your finger as if the battery was in the phone ! If battery conector gets up from the board, this is the problem ! Remove plastic cover from pins and resolder. What happens is temperature sensor is disconected from phone and phone sees -17 degrees and in this state phone will not charge battery !

Tell me what you did !

fiZ · 07-01-2002, 16:06

conectors are ok

jonwillow · 07-01-2002, 19:52

try change 47Kom resistor on pcb(resistor stay in power pads)

gsm_boy · 07-02-2002, 12:32

Quote:

Originally posted by jonwillow
try change 47Kom resistor on pcb(resistor stay in power pads)

Hi

yes change 47Kom resistor... which is R127 in Service manual located near the Battrey connector on main board.

Good Luck

07-01-2002, 13:35	#1 (permalink)
fiZ Freak Poster Join Date: Feb 2002 Location: nokia Posts: 203 Member: 9626 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	who will teach? Nokia 3210: NOT CHARGING! who can will teach,how to repair this problem in details *** for you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Who Can Teach Me (how To Write Rpl File Step By Step)	energy02	Universalbox	6	05-13-2008 09:40
Who Can Teach Me How To Repair Phones?	sunrise gsm	Nokia Hardware & Hardware-Repair Area	5	02-29-2008 18:26
T630 Broken on/off switch.who can teach me how to jump line , thank you	energy02	Sony Ericsson Hardware Repair Area	0	07-21-2006 07:23
Who can teach me how to flash?	bbbbbb	Nokia Digital Core Technology 4 ( DCT-4 )	4	07-27-2004 12:19

07-01-2002, 15:59	#2 (permalink)
mr_x4you No Life Poster Join Date: Jun 2001 Location: Black Mesa Age: 38 Posts: 3,292 Member: 4989 Status: Offline Thanks: 2 Thanked 11 Times in 10 Posts	look at battery conectors on board ! Watch what happens when you press them with your finger as if the battery was in the phone ! If battery conector gets up from the board, this is the problem ! Remove plastic cover from pins and resolder. What happens is temperature sensor is disconected from phone and phone sees -17 degrees and in this state phone will not charge battery ! Tell me what you did !

07-01-2002, 16:06	#3 (permalink)
fiZ Freak Poster Join Date: Feb 2002 Location: nokia Posts: 203 Member: 9626 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	conectors are ok

07-01-2002, 19:52	#4 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 33 Posts: 909 Member: 461 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	try change 47Kom resistor on pcb(resistor stay in power pads)