Nokia 3410 contact service - GSM-Forum

ukmobiles · 02-07-2003, 15:13

I have a nokia 3410 that says contact service.

I want to flash the software however i can only get the phone to reconize in NK Pofile it will not work on

EEPROM Tools
KNok
Nokia tool
Wintesla ( this one wont load it says DK2WIN16.dll is not found and it needs it to run )

Other various software tryed but most say phone not connected.

Please help as i am really stuck.

manijak · 02-07-2003, 21:59

Try to reflow coba and ccont then try to fa**** with nokia flasher rolis471 as 3330

manijak · 02-07-2003, 21:59

Try to reflow coba and ccont. Then try to fa**** with nokia flasher rolis471 as "3330" with 3410 flash

ukmobiles · 02-07-2003, 22:47

What is coba??

And where can i get rolis471 from??

GazI · 02-08-2003, 00:55

hi rolis flasher try this link

http://www.crackingworld.de/gsmfree/...flasher478.zip

cobba
http://free.pages.at/kkpsycho/Tempupload/33xxlayout.jpg

ukmobiles · 02-08-2003, 02:46

Cheers i have cleaned the board in my PCB Bath with methalated spirit.

I am using Rolis i click on read and it says "press power on shortly" so i turn the phone on and i leave it about 15 minutes and it still dosnt do anything i cant close the program after this so i have to alt +control + delete to get rid of it.

What can i do now ??

GazI · 02-08-2003, 10:23

don't turn on the phone

"press power on shortly

ukmobiles · 02-08-2003, 14:28

That is what i do but nothing happens.

I have now got rolis working but it wont read i dont know exaclty what the start address and end should be.

DO you know?

GazI · 02-08-2003, 14:45

hi
flash address

http://www.thony.xtr.at/dd69/adressen.htm

ukmobiles · 02-08-2003, 19:11

I have now got Rolis Version 1.8 to work with my phone i know the problem with the contact service it is the MCU checksum as it failed the test.

I am now trying to flash the phone but i cant read the phone because it says MCU Memory reading error at address 0xA00000

Please can you advice me i have tryed to write it and it says Writing MCU memory 0x100000 but doesnt do anything after this.

GazI · 02-08-2003, 23:01

hi try with this soft
http://www.crackingworld.de/gsmfree/...her/licker.zip
go tu Read ME
I agree
Add flash
and flash

bop_gsm · 02-08-2003, 23:37

@ ukmobiles
hi

u can get full flash + program in my group

3330 = 3410 4MB

after download program

1- select phone model 3330
2 - write full flash 3410

& tell me

good luck

zmicier · 02-09-2003, 00:11

try fullflash with knock phoenix and update faid
all ok for me (3pcs 2 with contact service repaired)

02-07-2003, 15:13	#1 (permalink)
ukmobiles Junior Member Join Date: Feb 2003 Posts: 28 Member: 20819 Status: Offline Thanks Meter: 0	Nokia 3410 contact service I have a nokia 3410 that says contact service. I want to flash the software however i can only get the phone to reconize in NK Pofile it will not work on EEPROM Tools KNok Nokia tool Wintesla ( this one wont load it says DK2WIN16.dll is not found and it needs it to run ) Other various software tryed but most say phone not connected. Please help as i am really stuck.

02-08-2003, 23:37	#12 (permalink)
bop_gsm Banned Join Date: May 2002 Location: GERMANY Age: 43 Posts: 1,626 Member: 11549 Status: Offline Thanks Meter: 6	@ ukmobiles hi u can get full flash + program in my group 3330 = 3410 4MB after download program 1- select phone model 3330 2 - write full flash 3410 & tell me good luck Last edited by bop_gsm; 02-08-2003 at 23:51.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3410 - Contact Service	sirnito	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	12	08-27-2005 13:23
3410 contact service	muhammed Rabiu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	06-15-2005 14:35
3310 & 3410 contact service	gsmdz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	14	03-19-2005 07:23
3410 contact service	gbada	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	10-30-2004 14:58
3410 contact service imei 0000 and original 65656 ???	flechazo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	10-01-2004 17:33

02-07-2003, 21:59	#2 (permalink)
manijak Freak Poster Join Date: Jul 2002 Age: 46 Posts: 193 Member: 13596 Status: Offline Thanks Meter: 0	Try to reflow coba and ccont then try to fa**** with nokia flasher rolis471 as 3330

02-07-2003, 21:59	#3 (permalink)
manijak Freak Poster Join Date: Jul 2002 Age: 46 Posts: 193 Member: 13596 Status: Offline Thanks Meter: 0	Try to reflow coba and ccont. Then try to fa**** with nokia flasher rolis471 as "3330" with 3410 flash

02-07-2003, 22:47	#4 (permalink)
ukmobiles Junior Member Join Date: Feb 2003 Posts: 28 Member: 20819 Status: Offline Thanks Meter: 0	What is coba?? And where can i get rolis471 from??

02-08-2003, 00:55	#5 (permalink)
GazI No Life Poster Join Date: Jan 2003 Location: KOSOVA Age: 36 Posts: 1,278 Member: 20566 Status: Offline Thanks Meter: 29	hi rolis flasher try this link http://www.crackingworld.de/gsmfree/...flasher478.zip cobba http://free.pages.at/kkpsycho/Tempupload/33xxlayout.jpg

02-08-2003, 02:46	#6 (permalink)
ukmobiles Junior Member Join Date: Feb 2003 Posts: 28 Member: 20819 Status: Offline Thanks Meter: 0	Cheers i have cleaned the board in my PCB Bath with methalated spirit. I am using Rolis i click on read and it says "press power on shortly" so i turn the phone on and i leave it about 15 minutes and it still dosnt do anything i cant close the program after this so i have to alt +control + delete to get rid of it. What can i do now ??

02-08-2003, 10:23	#7 (permalink)
GazI No Life Poster Join Date: Jan 2003 Location: KOSOVA Age: 36 Posts: 1,278 Member: 20566 Status: Offline Thanks Meter: 29	don't turn on the phone "press power on shortly

02-08-2003, 14:28	#8 (permalink)
ukmobiles Junior Member Join Date: Feb 2003 Posts: 28 Member: 20819 Status: Offline Thanks Meter: 0	That is what i do but nothing happens. I have now got rolis working but it wont read i dont know exaclty what the start address and end should be. DO you know?

02-08-2003, 14:45	#9 (permalink)
GazI No Life Poster Join Date: Jan 2003 Location: KOSOVA Age: 36 Posts: 1,278 Member: 20566 Status: Offline Thanks Meter: 29	hi flash address http://www.thony.xtr.at/dd69/adressen.htm

02-08-2003, 19:11	#10 (permalink)
ukmobiles Junior Member Join Date: Feb 2003 Posts: 28 Member: 20819 Status: Offline Thanks Meter: 0	I have now got Rolis Version 1.8 to work with my phone i know the problem with the contact service it is the MCU checksum as it failed the test. I am now trying to flash the phone but i cant read the phone because it says MCU Memory reading error at address 0xA00000 Please can you advice me i have tryed to write it and it says Writing MCU memory 0x100000 but doesnt do anything after this.

02-08-2003, 23:01	#11 (permalink)
GazI No Life Poster Join Date: Jan 2003 Location: KOSOVA Age: 36 Posts: 1,278 Member: 20566 Status: Offline Thanks Meter: 29	hi try with this soft http://www.crackingworld.de/gsmfree/...her/licker.zip go tu Read ME I agree Add flash and flash

02-09-2003, 00:11	#13 (permalink)
zmicier Freak Poster Join Date: Oct 2001 Location: Minsk, Belarus Posts: 251 Member: 6937 Status: Offline Thanks Meter: 0	try fullflash with knock phoenix and update faid all ok for me (3pcs 2 with contact service repaired)